Extensive experiments on the heat transfer and pressure drop characteristics of louvre finand-tube heat exchangers were carried out. In the present study, 14 samples of non-redirection louvre fin-and-tube heat exchangers with different geometrical parameters, including the number of tube row, fin pitch and tube size, were tested in a wind tunnel. Results are presented as plots of the Fanning friction factor f and the Colburn j factor against Reynolds number based on the tube collar diameter in the range of 300–8000.
ChangY. J.WangC. C.A generalized heat transfer correlation for louver fin geometry. Int. J. Heat Mass Transfer, 1997, 30(3), 533–544.
2.
ChangW. R.WangC. C.TsiW. C.ShyuR. J.Air side performance of louver fin heat exchanger. In Proceedings of Fourth ASME/JSME Thermal Engineering Joint Conference 1995, Vol. 4, pp. 367–372.
3.
WangC. C.ChiK. U.ChangY. J.ChangY. P.An experimental study of heat transfer and friction characteristics of typical louver fin and tube heat exchangers. Int. J. Heat Mass Transfer, 1998, 41, 817–822.
4.
ASHRAE Handbook Fundamental, SI Edition, 1993, Ch. 13, pp. 14–15 (American Society of Heating, Refrigerating and Air-conditioning Engineers, Inc., Atlanta, Georgia).
5.
ASHRAE Standard 41.2-1987. Standard Methods for Laboratory Air-Flow Measurement, 1987 (American Society of Heating, Refrigerating and Air-conditioning Engineers, Inc., Atlanta, Georgia).
6.
MoffatR. J.Describing the uncertainties in experimental results. Expl Thermal and Fluid Sci., 1988, 1, 3–17.
7.
McQuistonF. C.ParkerJ. D.Heating, Ventilating, and Air-conditioning, 4th edition, 1994, Ch. 14, p. 571 (Singapore).
8.
GnielinskiV.New equation for heat and mass transfer in turbulent pipe and channel flow. Int. Chem. Engng, 1976, 16, 359–368.
RichD. G.The effect of fin spacing on the heat transfer and friction performance of multi-row, plate fin-and-tube heat exchangers. ASHRAE Trans., 1975, 79(1), 137–145.
11.
RichD. G.The effect of fin spacing on the heat transfer and friction performance of multi-row, plate fin-and-tube heat exchangers. ASHRAE Trans., 1973, 79(2), 137–145.
12.
SeshimoY.FujiiM.An experimental study of the performance of plate fin and tube heat exchangers at low Reynolds number. In Third ASME/JSME Thermal Engineering Joint Conference, 1991, Vol. 4, pp. 449–454.
13.
WangC. C.HsiehY. C.ChangY. J.LinY. T.Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins. Int. J. Refrig., 1996, 19(4), 223–230.
14.
WangC. C.ChenP. Y.JangJ. Y.Heat transfer and friction characteristics of convex-louver fin-and-tube heat exchangers. Expl Heat Transfer, 1996, 9(1), 61–78.
15.
WangC. C.FuW. L.ChangC. T.Heat transfer and friction characteristics of typical wavy fin-and-tube heat exchangers. J. Expl Thermal and Fluid Sci., 1997, 14(2), 174–186.
16.
RohsenowW. M.HartnettJ. P.GanicE. N.Handbook of Heat Transfer Applications, 2nd edition, 1985, pp. 4–249 (McGraw-Hill, New York).
17.
TanakaT.ItohM.KudohM.TomitaA.Improvement of compact heat exchangers with inclined louvered fins. Bull. Jap. Soc. Mech. Engrs, 1984, 27(224), 219–226.
18.
KajinoM.HiramatsuM.Research and development of automotive heat exchangers. In Heat Transfer in High Technology and Power Engineering (Eds YangW. J.MoriY.), 1987, pp. 420–432 (Hemisphere, Washington, D.C.).
19.
WongC. F.AchaichiaA.CowellT. A.Unpublished flow visualization data for water channel flow through louvers arrays. Quoted in the article of ‘Flow and heat transfer in compact louvered fin surfaces’, by CowellT. A.HeikalM. R.AchaichiaA.. Expl Thermal and Fluid Sci., 1995, 10, 192–199.
20.
WebbR. L.Principles of Enhanced Heat Transfer, 1994, Ch. 3 (John Wiley, New York).
