Effect of thread pitch on the fatigue strength of steel bolts

Abstract

The paper explores the effect of the thread pitch on the fatigue strength of ISO steel bolts fitted with standard nuts. By means of boundary element analyses and cross-comparison with theory and photoelasticity, the load capacity of the bolt is ultimately related to a comprehensive notch factor which embodies both stress concentration and notch sensitivity dependencies. The notch factor is conveniently plotted as a function of nominal diameter and thread pitch for a selection of steel grades. The charts show that the endurance load slightly increases as the pitch is decreased for small bolts of low-grade steel. Conversely, the endurance load markedly increases with the pitch (improvements above 40 per cent can be achieved) for large bolts of high-grade steel.

Keywords

threaded connections thread pitch fatigue strength boundary elements

Get full access to this article

View all access options for this article.

References

Bickford

J. H.

An Introduction to the Design and Behavior of Bolted Joints, 1981 (Marcel Decker, New York).

Waltermire

W. G.

Coarse or fine threads?

Mach. Des., 1960, 32(6), 134–140.

Yakushev

A. I.

Effect of Manufacturing Technology and Basic Thread Parameters on the Strength of Threaded Connections, 1964 (Pergamon, Oxford).

Kloos

K.-H.

Thomala

Zur Dauerhaltbarkeit von Schraubenverbindungen. Teil 4: Der Einfluß von Randentkohlung und Gewindesteigung (Fatigue strength of threaded connections. Part 4: Effect of decarburization and thread pitch). Verbindungstechnik, 1979, 11(5), 22–29.

Dragoni

Effect of thread pitch and frictional coefficient on the stress concentration in metric nut-bolt connections. Trans. ASME, J. Offshore Mechanics and Arctic Engng, 1994, 116(1), 21–27.

Maduschka

Beanspruchung von Schraubenverbindungen und Zweckmäßige Gestaltung der Gewindeträger (Stresses in threaded connections and shape optimisation). Forschung auf dem Gebiete des Ingenieurwesens, 1936, 7(6), 299–305.

Birger

I. A.

Load distribution in screw threads (in Russian). Vestnik mashinostroeniya, 1944, 11(1), 7–12.

Sopwith

D. G.

The distribution of load in screw threads. Proc. Instn Mech. Engrs, 1948, 159, 373–383, 391–398.

Kenny

Patterson

E. A.

The distribution of load and stress in the threads of fasteners—a review. J. Mech. Behaviour Mater., 1989, 2(1–2), 87–105.

10.

Stoeckly

E. E.

Macke

H. J.

Effect of taper on screw thread load distribution. ASME Trans., 1952, 74(1), 103–112.

11.

Patterson

E. A.

Kenny

A modification to the theory for the load distribution in conventional nuts and bolts. J. Strain Analysis, 1986, 21(1), 17–23.

12.

Neuber

Kerbspannungslehre (Stresses Around Notches), 2nd edition, 1958 (Springer, Berlin).

13.

Dragoni

Stress concentration in periodic notches (in Italian). In Proceedings of XXIII AIAS National Congress, Rende 1994, pp. 441–447.

14.

Heywood

R. B.

Tensile fillet stresses in loaded projections. Proc. Instn Mech. Engrs, 1948, 159, 384–391.

15.

Heywood

R. B.

Designing by Photoelasticity, 1952 (Chapman and Hall, London).

16.

Patterson

E. A.

Kenny

The optimisation of the design of nuts with partly tapered threads. J. Strain Analysis, 1986, 21(2), 77–84.

17.

Wiegand

Illgner

K.-H.

Berechnung und Gestaltung von Schraubenverbindungen (Design of Bolted Joints), 1962 (Springer, Berlin).

18.

Sines

Waisman

J. L.

Metal Fatigue, 1969 (McGraw-Hill, New York).

19.

Wiegand

Strigens

Die Haltbarkeit von Schraubenverbindungen mit Feingewinden bei wechselnder Beanspruchung (Fatigue strength of threaded connections with fine thread pitch). Industrie Anzeige, 1970, 92(91), 2139–2144.

20.

Field

J. E.

Fatigue strength of screw threads. The Engineer, 1954, 198(7), 123–124.