Tolerance modelling and robust design for concurrent engineering

Abstract

This article presents a tolerance modelling and robust design approach to support concurrent engineering. This method allows the designer to synthetically specify dimensional and geometric tolerance, considering assembly functional requirements (AFRs) and manufacturing costs. First, features of ISO/TC 213 are used as the basis for the construction of tolerance network and tolerance model for assembly. Second, the manufacturing cost-tolerance model for cylindrical and planar features is established. This model addresses not only dimensional tolerances but also geometric tolerances and nominal parameters. Finally, the robust tolerance optimization model is established, and genetic arithmetic is used to obtain robust tolerance values. The proposed approach is consistent with the philosophy of concurrent engineering, in which AFRs are satisfied and manufacturing cost is reduced. A design instance is introduced to show the validity of this method.

Keywords

tolerance modelling tolerance network robust design assembly manufacturing cost

Get full access to this article

View all access options for this article.

References

Bjørke

Computer-aided tolerancing, 1989 (ASME, New York).

Willhelm

R. G.

S. C.-Y.

Tolerance synthesis to support concurrent engineering. Ann. CIRP, 1992, 41(1), 197–200.

Dong

Xue

New production cost- tolerance models for tolerance synthesis. J. Eng. Ind., 1994, 116(3), 199–206.

Ngoi

B. K. A.

Teck

O. C.

A tolerancing optimization method for product design. Int. J. Adv. Manuf. Technol., 1997, 13, 290–299.

Ngoi

B. K. A.

Min

O. J.

Optimum tolerance allocation in assembly. Int. J. Adv. Manuf. Technol., 1999, 15, 660–665.

C. C.

Tang

G. R.

Tolerance design for products with asymmetric quality losses. Int. J. Prod. Res., 1998, 36(9), 2529–2541.

Jeang

Robust tolerance design by response surface methodology. Int. J. Adv. Manuf. Technol., 1999, 15, 399–403.

Lin

Z. C.

Chang

D. Y.

Cost-tolerance analysis model based on a neural networks method. Int. J. Prod. Res., 2002, 40(6), 1429–1452.

Hsieh

K.-L.

The study of cost-tolerance model by incorporating process capability index into product lifecycle cost. Int. J. Adv. Manuf. Technol., 2005, 19, 638–642.

10.

J. R.

Tolerancing for manufacturing via cost minimization. Int. J. Mach. Tools Manuf., 1991, 31, 455–470.

11.

Islam

M. N.

Functional dimensioning and tolerancing software for concurrent engineering applications. Comput. Ind., 2004, 54(2), 169–190.

12.

Desrochers

Clement

Dimensioning and tolerancing assistance model for CAD/CAM systems. Int. J. Adv. Manuf. Technol., 1994, 9, 352–361.

13.

Chase

K. W.

Gao

Magleby

S. P.

Sorensen

C. D.

Including geometric feature variation in tolerance analysis of mechanical assemblies. IIE Trans., 1996, 28, 795–807.

14.

Tsai

J. C.

Cutkosky

M. R.

Representation and reasoning of geometric tolerances in design. Artif. Intell. Eng. Des. Anal. Manuf., 1997, 11(4), 325–341.

15.

Ngoi

B. K. A.

Lim

B. H.

Ang

P. S.

Nexus method for stack analysis of geometric dimensioning and tolerancing (GDT) problems. Int. J. Prod. Res., 2000, 38(1), 21–37.

16.

Ngoi

B. K. A.

Lim

L. E. N.

Ang

P. S.

Ong

A. S.

Assembly tolerance stack analysis for geometric characteristics in form control - the “Catena” method. Int. J. Adv. Manuf. Technol., 1999, 15, 292–298.

17.

Srikanth

Liou

F.W.

Balakrishnan

S. N.

Integrated approach for assembly tolerance analysis. Int. J. Prod. Res., 2001, 39(7), 1517–1535.

18.

Desrochers

A CAD/CAM representation model applied to tolerance transfer methods. J. Mech. Des., 2003, 125(1), 14–22.

19.

Rivest

Fortin

Morel

Tolerancing a solid model with a kinematic formulation. Comput. Aided Des., 1994, 26(6), 465–475.

20.

Pino

Bennis

Fortin

Calculation of virtual and resultant parts for variational assembly analysis. Proceedings of 7th CIRP Seminars on Computer aided tolerancing, ENS de Cachan, France, 2001, pp. 131–140.

21.

Anselmetti

Mejbri

Mawussi

Coupling experimental design - digital simulation of junctions for the development of complex tolerance chains. Comput. Ind., 2003, 50(3), 277–292.

22.

Anselmetti

Mejbri

Mawussi

Synthesis of tolerances starting from a fuzzy expression of the functional requirements. Proceedings of 7th CIRP Seminars on Computer aided tolerancing, ENS de Cachan, France, 2001, 265–274.

23.

Ballot

Bourdet

Thiebaut

3D tolerance chains: Present conclusions and further research. Proceedings of 7th CIRP Seminars on Computer aided tolerancing, ENS de Cachan, France, 2001, pp. 65–74.

24.

Srinivasan

A geometrical product specification language based on a classification of symmetry groups, Comput. Aided Des., 1999, 31, 659–668.

25.

Srinivasan

An integrated view of geometrical product specification and verification. Proceedings of 7th CIRP Seminars on Computer aided tolerancing, ENS de Cachan, France, 2001, pp. 7–18.

26.

Konkar

Incremental kinematic analysis and symbolic kinematic synthesis of mechanism. PhD dissertation, Mechanical Engineering Department, Stanford University, 1993.