In this work, a power-split continuously variable transmission (CVT) used in high-power tractors is considered. Power-split CVTs are characterized by the combination of a traditional discontinuous mechanical transmission and a continuously variable transmission. This provides, at the same time, smooth variations of the transmission ratio and high efficiency of the overall transmission system. The CVT considered in this paper is a hydrostatic power-split unit conceived for top-power agricultural tractors. The goal of this paper is to present a case study on the design and tuning of the control system structure for this type of CVT. This structure consists of three main parts: a servo controller on the internal current of the valve of the hydraulic transmission; a servo controller on the hydraulic transmission ratio; a synchronizer which coordinates the hydraulic and the mechanical parts of the CVT. The design, tuning and testing of this set of automatic controllers is presented.
LiuS.PadenB.A survey of today's CVT controls. 36th IEEE Decision and Control Conference, San Diego, 1997, pp. 4738–4743.
3.
MantriotaG.Power split continuously variable transmission systems with high efficiencyProc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2001, 215 (3), 357–368.
4.
VahabzadehH.LinzellS. M.Modeling, simulation, and control implementation for a split-torque, geared neutral, infinitely variable transmission. SAE paper 910409, 1991.
5.
NevalaK.PenttinenJ.SaavalainenP.Development of the anti-slip control of hydrostatic power transmission for forest tractor and optimization of the power of diesel engine. 5th International Workshop onAdvanced Motion Control, Ciombra, 1998, pp. 475–480.
6.
ScarlettA. J.Integrated control of agricultural tractors and implements: A Review of potential opportunities relating to cultivation and crop establishment machineryInt. J. Computers and Electronics in Agric., 2001, 30 (1–3), 167–191.
7.
KienckeU.NielsenL.Automotive Control Systems for Engine, Driveline, and Vehicle, 2000 (Springer-Verlag, Berlin).
8.
KimT.KimH.Performance of integrated engine-CVT control considering powertrain loss and CVT response lagProc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2002, 216 (7), 545–553.
9.
PaulM.CVTs driving the future of transmission technology. International Congress onContinuously Variable Power Transmission, Eindhoven, 1999.
10.
SilaniE.SavaresiS. M.BittantiS.ViscontiA.FarachiF.The concept of performance-oriented yaw-control systems: vehicle model and analysis. 2002 SAE Automotive Dynamics and Stability Conference, Detroit, Michigan, 7–9 May 2002, pp. 235–245 (SAE paper 2001–01-1585).
11.
SchwabM.Electronically-controlled transmission systems-current position and future developments. International Congress onTransportation Electronics, 1990, pp. 335–342.
12.
SetlurP.WagnerJ.R.DawsonD. M.SamuelsB.Nonlinear control of a continuously variable transmission (CVT) for hybrid vehicle powertrains. IEEE/ASME American Control Conference, Arlington, 2001, pp. 1304–1309.
13.
SolticP.GuzzellaL.Performance simulations of engine-gearbox combinations for lightweight passenger carsProc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2001, 215 (2), 259–271.
14.
ZouZ.ZhangY.ZhangX.ToblerW.Ratio control of traction drive continuously variable transmissions. IEEE/ASME American Control Conference, 2000, pp. 1525–1529.
15.
TanakaH.Speed ratio control of a parallel layout double cavity half-toroidal CVT for four-wheel driveJ. Soc. Automot. Engrs Jap., 2002, 23 (3), 213–217.
16.
ChengY.De MoorB. L. R.Robustness analysis and control system design for a hydraulic servo systemIEEE Trans. Control Syst. Technol., 1994, 2 (3), 183–197.
17.
WonohK.VachtsevanosG.Fuzzy logic ratio control for a CVT hydraulic module. IEEE International Symposium onIntelligent Control, 2000, pp. 151–156.
8XC196Kx, 8XC196Jx, 87C196CA Microcontroller Family User's Manual, 1995 (Intel Incorporated).
20.
BittantiS.PicciG. (Eds). Identification, Adaptation, Learning-The Science of Learning Models from Data, Computer and Systems Sciences Series, 1996 (Springer Verlag, Berlin).
21.
BittantiS.CampiM.SavaresiS. M.Unbiased estimation of a sinusoid in noise via adapted notch filtersAutomatica, 1997, 33 (2), 209–215.
22.
BittantiS.SavaresiS. M.On the parameterization and design of an extended Kalman filter frequency trackerIEEE Trans. Autom. Control, 2000, 45 (9), 1718–1724.
23.
SavaresiS. M.BitmeadR.DunstanW.Nonlinear system identification using closed-loop data with no external excitation: The case of a lean combustion processInt. J. Control, 2001, 74, 1796–1806.
