Study on the injection process of a direct-injection diesel engine fuelled with dimethyl ether

Abstract

The injection process of dimethyl ether (DME) was tested on a naturally aspirated, direct- injection (DI) diesel engine with a pump-line-nozzle fuel system. In order to eliminate vapour leakage, DME was pressurized into the injection pump by nitrogen. In view of its low calorific value and liquid density, the pump plunger diameter and nozzle orifice area were enlarged to achieve the rated power. As DME is easy to atomize and evaporate, the nozzle opening pressure was lowered. The study demonstrates that the injection delay with DME is much longer than that with diesel fuel, due to the lower sound velocity in DME liquid, resulting from its higher compressibility and lower density. When a diesel engine operates on DME instead of diesel fuel, the advance angle of fuel supply should be increased. The fluctuations of line pressure, nozzle needle lift, opening time, and closing time for DME are larger than those for diesel fuel.

Keywords

dimethyl ether DI diesel engines fuel injection process

Get full access to this article

View all access options for this article.

References

Xiang

Ren

Analysis of the trend and current status of automotive industry in China, Res. Dev. Automot., 2002, 1, 11–15.

Rickeard

D. J.

Kheshgi

H. S.

European fuel and vehicle options for the future-focus on biofuels. In Proceedings of the FISITA 2002 World Automotive Congress, Helsinki, Finland, June 2002.

Lee

S. W.

Kusaka

Daisho

Spray characteristics of alternative fuels in constant volume chamber (comparison of the spray characteristics of LPG, DME and n-dodecane), JSAE Rev., 2001, 22, 271–276.

Bae

Dimethyl ether (DME) spray characteristics in a common-rail fuel injection system, Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2003, 217, 1135–1144.

Chen

Konno

Goto

Study on homogenous premixed charge CI engine fueled with LPG, JSAE Rev., 2001, 22, 265–270.

Alam

Fujita

Ito

Performance of NO_x catalyst in a DI diesel engine operated with neat dimethyl ether, SAE Paper, 1999, No. 1999–01-3599.

Fleisch

McCarthy

Basu

A new clean diesel technology: Demonstration of ULEV emissions on a Navistar diesel engine fueled with dimethyl ether, SAE Paper, 1995, No. 950061.

Hansen

K. F.

Nielsen

Hansen

J. B.

Demonstration of a DME (dimethyl ether) fuelled city bus, SAE Technical Paper, 2000, No. 2000–01-2005.

Verbeek

Van del Weide

Global assessment of dimethyl-ether: Comparison with other fuel, SAE Paper, 1997, No. 971607.

10.

Kozole

K. H.

Wallance

J. S.

The use of dimethyl ether as a starting aid for methanol-fueled S.I. engines at low temperature, SAE Paper, 1988, No. 881677.

11.

Murayama

Chikahisha

Guo

A study of a compression ignition methanol engine with converted dimethyl ether as an ignition improver, SAE Paper, 1992, No. 922212.

12.

Ofner

Gill

D. W.

Krotscheck

Dimethyl ether as fuel for CI engines-a new technology and its environmental potential, SAE Technical Paper, 1998, No. 981158.

13.

Zhou

L. B.

Wang

Jiang

D. M.

Study of performance and combustion characteristics of a DME-fueled light-duty direct-injection diesel engine, SAE Paper, 1999, No. 1999–01-3669.

14.

Qiao

X. Q.

Zhang

G. D.

Huang

Injection and combustion of dimethyl ether fuelled diesel engine. In Proceedings of the 14th International Symposium on

Alcohol Fuels (ISAF XIV), Phuket Island, Thailand, November 2002.

15.

Sato

Research and development of a medium-duty truck in Japan, F2004V298. In Proceedings of the FISITA 2004. World Automotive Congress, Barcelona Spain, May 2004 (to appear).