The paper presents a simplified parametric model of a half-toroidal continuously variable unit (CVU) by using a finite element (FE) method in which the continuously variable speed unit is discretized into lumped masses and damper and spring elements. Linearized FE elements have been used to model the contact between the toroids and the rollers. All the FE elements, including the CVU model, are integrated into the complete powertrain system. Free torsional vibration analysis of the complete powertrain system has been carried out. Significant changes are observed in the natural frequencies as well as the modal shapes of the complete powertrain with respect to different gear ratios of the CVU and the various contact torsional stiffness. A potential problem with the powertrain system has also been identified, and remedial action has been proposed. The system characteristics have further been investigated with a lock-up clutch incorporated in the powertrain system.
MachidaH.KurachiN.Prototype design and testing of the half toroidal CVT. SAE technical paper 9000552, 1990.
4.
MachidaH.HataH.NakanoM.TanakaH.Half-toroidal traction drive continuously variable transmission for automobile propulsion systems (traction drive materials, transmission design and efficiency)Nippon Kikai Gakkai Ronbunshu, Chen, April 1993, 59 (560), 1154–1160.
5.
MachidaH.ItohH.ImanishiT.Design principle of high power traction drive CVT. SAE technical paper 950675, 1995.
6.
TanakaH.EguchiM.Stability of a speed ratio control servo-mechanism for a half-toroidal traction drive CVTJap. Soc. Mech. Engrs Int. J., Ser. 3; Vibr. Control Engng, Engng for Industry, March 1993, 36 (1), 135–139.
7.
TanakaH.MachidaH.HataH.NakanoM.Half-toroidal traction drive continuously variable power transmission for automobiles (traction drive materials, transmission design and efficiency)Jap. Soc. Mech. Engrs Int. J., Ser. C, Dynamics, Control, Robotics, Des. and Mfg, 1995, 38 (4), 772–777.
8.
TanakaH.EguchiM.MachidaH.ImanishiT.Power transmission of half-toroidal traction drive continuously variable transmission (four-wheel-drive CVT design and its performance)Jap. Soc. Mech. Engrs Int. J., Ser. C, Dynamics, Control, Robotics, Des. and Mfg, 1995, 38 (4), 778–782.
9.
TanakaH.MachidaH.Half-toroidal traction-drive continuously variable power transmissionProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1996, 210 (3), 205–212.
10.
TenbergeP.Ratio stability of toroidal traction drives. In Proceedings of International Congress onContinuously Variable Power Transmission CVT ‘99, Eindhoven, The Netherlands, 1999, pp. 77–84.
11.
MoriH.YamazakiT.KobayashiK.HibiT.A study on the layout and ratio change characteristics of a dual-cavity half-toroidal CVTJap. Soc. Automot. Engrs Rev., 2001, 22, 299–303.
12.
NakanoM.HibiT.Dynamic characteristics of speed ratio control of the half toroidal CVT for passenger cars. SAE technical paper 901761, 1990.
13.
NakanoM.HibiT.KobayashiK.Dual-cavity half toroidal CVT for passenger cars. SAE technical paper 922105, 1992.
14.
NakanoM.KumuraH.SugiharaJ.MoriH.Development of a large torque half-toroidal CVTTransmission and Driveline Symposium, 2000, SP-1522, pp. 1–8 (Society of Automotive Engineers).
15.
YamamotoT.MatsudaK.HibiT.Analysis of the efficiency of a half-toroidal CVTJap. Soc. Automot. Engrs Rev., 2001, 22, 565–570.
16.
ZhangX.ToblerW.ZhangY.Kinematic analysis and modelling of traction drive CVT. In Proceedings of 5th ASME Design Engineering Technical Conference, Las Vegas, Nevada, 1999, Vol. 1, pp. 1439–1446.
17.
FellowsF. G.ChristopherG. J.The design and development of an experimental traction drive CVT for a 2.0 litre FWD passenger car. SAE technical paper, 1991, Vol. 100, pp. 9–19.
18.
HewkoL. O.Roller traction drive unit for extremely quiet power transmission. In Proceedings of AIAA 3rd Propulsion Joint Specialist Conference, Washington, DC, 1967, pp. 1–11.
19.
YadaT.Recent trends of traction driveSeimitsu Kogakkai Shi: J. Jap. Soc. Precision Engng, September1990, 56 (9), 1575–1580.
20.
TahboubK.AsadaH. H.Dynamic analysis and control of a holonomic vehicle with a continuously variable transmission. In Proceedings of 2000 IEEE International Conference onRobotics and Automation, San Francisco, California, 2000, Vol. 3, pp. 2466–2472.
21.
WickeV.BraceC. J.DeaconM.VaughanN. D.Preliminary results from driveability investigations of vehicles with continuously variable transmissions. In Proceedings of International Congress onContinuously Variable Transmission CVT ‘99, Eindhoven, The Netherlands, 1999, pp. 9–14.
22.
WickeV.BraceC. J.VaughanN. D.The potential for simulation of driveability of CVT vehiclesTransmission and Driveline Symposium, 2000 SP-1522, pp. 45–50 (Society of Automotive Engineers).
23.
WickeV.BraceC. J.VaughanN. D.JamesI.The characterisation of driveability of CVT powertrains during acceleration transients. In Proceedings of CVT 2002 Congress, Munich, Germany, 2002, pp. 311–325.
24.
FuchsR.HasudaY.JamesI.Modeling simulation and validation for the control development of a full-toroidal IVT. In Proceedings of CVT 2002 Congress, Munich, Germany, 2002, pp. 121–129.
25.
OsumiT.KazuhikoU.NobumotoH.SakakiM.FukumaT.Transient analysis of geared neutral type half toroidal CVTJap. Soc. Automot. Engrs Rev., 2002, 23, 49–53.
26.
ZhangN.CrowtherA.LiuD. K.JeyakumaranJ.A finite element method for the dynamic analysis of automatic transmission gear shifting with a four-degree-of-freedom planetary gearset elementProc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2003, 217, 1–13.
27.
BoedoS.FreyburgerD.A grease filled torsional coupling for CVT vehicles. SAE technical paper 911940, 1991.
28.
PattersonM.The full-toroidal variator in theory and in practice. In Proceedings of International Conference onContinuously Variable Power Transmissions, Yokohama, 1996, pp. 95–100.
