Skid Steering-Based Control of a Robotic Vehicle with Six in-Wheel Drives

Abstract

This paper describes a driving control algorithm based on a skid steering for a robotic vehicle with articulated suspension (RVAS). The RVAS is a kind of unmanned ground vehicle based on a skid steering using an independent in-wheel drive at each wheel. The driving control algorithm consists of four parts: a speed controller for following a desired speed, a lateral motion controller that computes a yaw moment input to track a desired yaw rate or a desired trajectory according to the control mode, a longitudinal tyre force distribution algorithm that determines an optimal desired longitudinal tyre force, and a wheel torque controller that determines a wheel torque command at each wheel in order to keep the slip ratio at each wheel below a limit value as well as to track the desired tyre force. Longitudinal and vertical tyre force estimators are required for the optimal tyre force distribution and wheel slip control. A dynamic model of the RVAS for simulation study is developed and validated using the vehicle test data. Simulation and vehicle tests are conducted in order to evaluate the proposed driving controller. It is found from simulation and vehicle test results that the proposed driving controller provides a satisfactory motion control performance according to the control mode.

Keywords

skid steering vehicle manoeuvrability driving controller tyre force distribution wheel torque control

Get full access to this article

View all access options for this article.

References

Golconda

Steering controller for a skid-steered autonomous ground vehicle at varying speed. PhD Thesis, Osmania University, India, 2005.

Economou

J. T.

Colyer

R. E.

Modelling of skid steering and fuzzy logic vehicle ground interaction. In Proceedings of the American Control Conference, Chicago, Illinois, 28–30 June 2000, vol. 1, pp. 100–104.

Dixon

W. E.

Dawson

D. M.

Zergeroglu

Behal

Nonlinear control of wheeled mobile robots.’ In Lecture notes in control and information sciences, vol. 262, 2001 (Springer-Verlag, London).

Cho

Yoon

Kim

Hur

An investigation into unified chassis control scheme for optimized vehicle stability and maneuverability

Veh. Syst. Dyn. , 2008 46(Suppl.), 87–105.

Chung

Kim

An investigation into differential braking strategies for vehicle stability control. Proc. IMechE, Part D: J. Automobile Engineering , 2003, 217, 1081–1093 DOI: 10.1243/09544070JAUTO77.

Uematsu

Gerdes

J. C.

A comparison of several sliding surfaces for stability control.In Proceedings of the 6th International Symposium on Advanced vehicle control (AVEC2002), Hiroshima, Japan, 2002.

Chen

Peng

Differential-braking-based rollover prevention for sport utility vehicles with human-in-the-loop evaluations. Veh. Syst. Dyn. , 36(4-5), 359–389.

Kang

J. J.

Hindiyeh

R. Y.

Moon

Gerdes

J. C.

Design and testing of a controller for autonomous vehicle path tracking using GPS/INS sensors. In Proceedings of the 17th World Congress, The International Federation of Automatic Control, pp. 2093–2098, 2008.

Peng

Vehicle lateral control for highway automation. PhD Thesis, University of California at Berkeley, 1992.

10.

Lenain

Thuilot

Cariou

Martinet

Adaptive control for car-like vehicles guidance relying on RTK GPS: rejection of sliding effects in agricultural applications. In Proceedings of the 2003 IEEE International Conference on Robotics and automation, September 2003, vol. 1, pp. 115–120.

11.

Lizarralde

Nunes

Hsu

Wen

Mobile robot navigation using sensor fusion. In Proceedings of the 2003 IEEE International Conference on Robotics and automation, vol.1, September 2003, pp. 458–463.

12.

Rajamani

Vehicle dynamics and control 2006, 387–432 (Springer, New York).

13.

Jazar

R. N.

Vehicle dynamics: theory and application 2008, 220–303 (Springer).

14.

Kang

Kim

Jung

Skid steering based maneuvering of robotic vehicle with articulated suspension. SAE Int. J. Passeng. Cars-Mech. Syst. 2009, 2(1), 645–652.

15.

Visioli

Modified anti-windup scheme for PID controllers. In Proceedings of the Control Theory and Applications Conference, January 2003, vol. 150, pp. 49–54.

16.

Cho

Yoon

Yim

Koo

Estimation of tire forces for application to vehicle stability control. IEEE Transactions on Vehicular Technology (in press).

17.

Ray

L. R.

Non-linear tyre force estimation and road friction identification: Simulation and experiments. Automatica , 1997, 33(10), 1819–1833.

18.

Rajamani

Piyabongkarn

Lew

J. Y.

Grogg

J. A.

Algorithms for real time estimation on individual wheel tire-road friction coefficients. In Proceedings of the 2006 American Control Conference, 2006, pp. 4682–4687.

19.

Mokhiamar

Abe

Simultaneous optimal distribution of lateral and longitudinal tire forces for the model following control. ASME, J. Dyn. Syst. Measmt. Contr. , 2004, 126, 753–763.

20.

Buckholtz

K. R.

Reference input wheel slip tracking using sliding mode control. In Proceedings of the SAE World Congress and Exhibition, Detroit, Michigan, 2002, SAE paper 2002-01-0301.

21.

Zhang

Liu

Wang

Zhou

A study of calculation method of wheel angular acceleration in ABS system. In Proceedings of 2004 International Conference on Information acquisition June 2004, pp. 147–150.

22.

Rossetter

E. J.

Switkes

J. P.

Gerdes

J. C.

A gentle nudge towards safety: experimental validation of the potential field driver assistance system. In Proceedings of the 2003 American Control Conference, 4–6 June 2003, pp. 3744–3749.