Brake squeal noise due to disc run-out

Abstract

To understand brake squeal noise, the sound and vibration of an automobile brake system were measured using a brake dynamometer. The experimental results show that an important factor in squeal generation is the run-out due to disc misalignment. A three-degrees-of-freedom model is developed for the brake system, where the run-out effect and non-linear friction characteristic are included. A stability analysis of the model was also performed to predict the generation of squeal with the modification of the brake system. The results show that squeal generation is dependent on the run-out rather than the friction characteristic between the pad and disc.

Keywords

brake squeal noise brake dynamometer disc run-out misalignment friction quasi-period doubling

Get full access to this article

View all access options for this article.

References

Mottershead

J. E.

Chan

S. N.

Brake squeal - an analysis of symmetry and flutter instability. In Friction-induced vibrations, chatter, squeal and chaos (Eds Ibrahim

R. A.

Soom

), DE-Vol. 49, 1992, pp. 87–97 (American Society of Mechanical Engineers, New York).

Ibrahim

R. A.

Friction-induced vibrations, chatter, squeal and chaos. Part II: Dynamics and modeling. Trans. ASME, Appl. Mechanics Rev., 1994, 47 (7), 227–253.

Masaaki

Hiroshi

Hiromasa

Takahiro

Study on disc brake squeal. SAE paper 890864, 1989.

Singh

Sheikh

A. A.

Mitchel

M. J.

Viscoelastic damping to control disk brake squeal. J. Sound Vibr., 1998, 32, 18–22.

Wauer

Heilig

Dynamics and stability of a nonlinear brake model. In Proceedings of the ASME 2001 Design Engineering Technical Conference, 2001, DETC 2001/ViB-21579 (American Society of Mechanical Engineers, New York).

Chung

Steed

Kobayashi

Nakata

A new analysis method for brake squeal Part 1: Theory for modal domain formulation and stability analysis. SAE paper 2001–01-1600, 2001.

Chowdhary

Bajaj

Krousgrill

An analytical approach to model disc brake system for squeal prediction. In Proceedings of the ASME 2001 Design Engineering Technical Conference, 2001, DETC 2001/ViB-21560 (American Society of Mechanical Engineers, New York).

Shin

Brennan

M. J.

J. E.

Harris

C. J.

Analysis of disc brake noise using a two degree of freedom model. J. Sound Vibr., 2002, 254 (5), 837–848.

Liles

G. D.

Analysis of disc brake squeal using finite element method. SAE paper 891150, 1989.

10.

Stearns

S. D.

David

R. A.

Signal processing algorithms in MATLAB, 1996 (Prentice-Hall, Englewood Cliffs, New Jersey).