Design of a lightweight automotive brake disc using finite element and Taguchi techniques

Abstract

Aluminium metal matrix composite brake discs offer significant weight advantages compared with the traditional cast iron rotor but have a much lower maximum operating temperature. In this study, a finite element model of an existing brake design is firstly used to predict the peak disc temperatures during two critical brake tests for both cast iron and an aluminium metal matrix composite alternative. A Taguchi analysis is then applied, enabling all the critical design and material factors of an aluminium metal matrix composite rotor to be considered collectively. Based on the results of this exercise, a parametric sensitivity study is carried out to define suitable design-material combinations for a prototype lightweight front brake disc to be used on small to medium passenger vehicles.

Keywords

lightweight automotive brake disc finite element model Taguchi analysis parametric sensitivity study

Get full access to this article

View all access options for this article.

References

Neitzl

Barth

Matic

Weight reduction of disc brake systems with the utilisation of new aluminium material. SAE technical paper 940335, 1994, pp. 29–35.

De Sanctis

A. M.

Evangelista

Forcellese

Fuganti

Forging of a MMC for an automotive component. In Proceedings of the Symposium on Materials for Lean Weight Vehicles, University of Warwick, 1995, pp. 73–82 (Institute of Materials, London).

Wycliffe

Friction and wear of Duralcan reinforced aluminium composites in automotive braking systems. SAE technical paper 930187, 1993.

Dwivedi

Performance of MMC rotors in dynamometer testing. SAE technical paper 940848, 1994, pp. 65–71.

Grieve

D. G.

Barton

D. C.

Crolla

D. A.

Buckingham

J. T.

Chapman

Investigation of light weight materials for break rotor applications. In Proceedings of the Symposium on Materials for Lean Weight Vehicles, University of Warwick, 1995, pp. 63–72 (Institute of Materials, London).

Grieve

D. G.

Barton

D. C.

Crolla

D. A.

Chapman

Buckingham

J. T.

Light weight disc brake materials. In Advances in Automotive Braking Technology, 1996, pp. 89–105 (Mechanical Engineering Publications, London).

Dennis

R. W.

Newstead

Ede

A. J.

The heat transfer from a rotating disc in an air crossflow. In Proceedings of the Fourth International Heat Transfer Conference, Paris, 1970, Vol. 8, 1970, p. 134 (Elsevier, Amsterdam).

Bailey

T. P.

Buckingham

J. T.

D'Cruz

A. H.

Optimisation of brake disc design using thermal imaging and finite element techniques. In Autotech 1991, Birmingham, 1991 (Mechanical Engineering Publications, London).

Taguchi

Taguchi on Robust Technology Development, 1993 (ASME Press, New York).