Low-cost resin infusion mould tooling for carbon fibre composites manufacture

Abstract

This article describes the research to date carried out under the BAE Systems/Engineering and Physical Sciences Research Council (EPSRC)-funded programme ‘Flapless Aerial Vehicle Integrated Interdisciplinary Research’ (FLAVIIR), aimed at developing innovative technologies for the low-cost manufacture of next-generation Unmanned Aerial Vehicles. The aim of the researchers in FLAVIIR was to develop low-cost innovative tooling technologies to enable the affordable manufacture of complex composite aerospace structures. The advances in tooling technology were achieved through the application of rapid prototyping, tooling and manufacture technologies to provide rapidly configured and reconfigurable tool concepts, for low-cost resin infusion moulding. This article introduces three tooling innovations: reconfigurable tooling concept, variable cavity tooling, and porous cavity tooling.

Keywords

carbon fibre composites tooling unmanned aerial vehicle

Get full access to this article

View all access options for this article.

References

Armstrong

D. L.

Goodwin

S. L.

Sharpless

Hethcock

J. D.

Andrews

Coyle

‘Development of a low-cost integrated RTM horizontal stabilizer that flies on Bell Helicopter's MAPL.’ In Proceedings of the 37th ISTC: Materials and Processing Technologies for Revolutionary Applications, Seattle, Washington, 31 October–3 November 2005, 15 pp.

Backhouse

‘A step towards affordable CFRP structures.’ In Proceedings of the Sixth Annual SPE Automotive Composites Conference, Troy, Michigan, USA, 2006, pp. 859–863.

Hamada

Maekawa

‘Effect of compression process on void behavior in structural resin transfer molding’

Polym. Eng. Sci. 367 (1996): 953–962

Choi

J. H.

Dharan

C. K. H.

‘Enhancement of resin transfer molding using articulated tooling’

Polym. Compos. 234 (2004): 674–681

Ruiz

Achim

Soukane

Trochu

Breard

‘Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites’

Compos. Sci. Technol. 663–4 (2006): 475–486

McConnell

V. P.

‘Fast-paced process evolution: Advanced RTM produces complex, repeatable, flight-critical parts’

SAMPE J. 346 (1998): 37–43

Varna

Joffe

Berglund

L. A.

Lundström

T. S.

‘Effect of voids on failure mechanisms in RTM laminates’

Compos. Sci. Technol. 532 (1995): 241–249

Seemann

W. H.

Plastic transfer molding techniques for the production of fiber reinforced plastic structures (1990) US Pat. 4902215.

Wanthal

Rapp

Sewell

T. A.

‘Improved laminate physical and mechanical properties using ‘hy-test’ vacuum assisted resin transfer molding.’ In Proceedings of the International SAMPE Symposium and Exhibition, Vol. 50, SAMPE 05: New Horizons for Materials and Processing Technologies - Conference Proceedings, Long Beach, California, USA, 2005, pp. 1271–1287.

10.

Mills

‘AMICC project laminate characterisation’ (2001) Internal AMICC Project Report, Centre for Lightweight Composites.

11.

Anon. RTM 120/HY2954. 120C Epoxy System for RTM Product Data Sheet, 1998, Hexcel Composites. ITA 086.

12.

Papargyris

D. A.

Day

R. J.

Nesbitt

Bakavos

‘Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating’

Compos. Sci. Technol. 68 (2008): 1854–1861

13.

Soderberg

M. S.

Starr

R. A.

Flexible tooling apparatus (1998) US Pat. 5722646.

14.

Munro

C. B.

Walczyk

Dvorak

Slusarski

S. J.

‘Incremental double diaphragm forming of composite materials using reconfigurable tooling’

Trans. North Am. Manuf. Res. Inst. SME 32 (2004): 495–502

15.

Haas

E. G.

Schwarz

R. C.

Papazian

J. M.

Modularized reconfigurable heated forming tool (1999) US Pat. 6089061.

16.

Walczyk

D. F.

Lakshmikanthan

Kirk

D. R.

‘Development of a reconfigurable tool for forming aircraft body panels’

J. Manuf. Syst. 174 (1998): 287–296