In this study, a finite-element (FE) stress analysis of aircraft structural double-lap bolted joints was performed using the commercially available computational package ANSYS in order to obtain the clamping pressure distribution and to estimate the stiffness of the joined plates (members) within the clamped region. The joint consists of three aluminium alloy 7075-T6 plates clamped by a single bolt, washer, and nut. A three-dimensional (3D) FE model of the joint was generated, and then subjected to three different simulated clamping forces. 3D surface-to-surface contact elements were employed to model the contact between the various components of the bolted joint. The model included friction between all contacting surfaces, and also a clearance between the bolt shank and the joint hole. FE results revealed an overall crock-shaped pressure distribution at the joined plates. Moreover, some beneficial longitudinal compressive stresses were observed around the fastener hole as a result of the clamping compressive effect.
BickfordJ. H.An introduction to the design and behaviour of bolted joints (New York: Marcel Dekker Inc. 1997).
3.
KulakG. L.FisherJ. W.StruikJ. H.A guide to design criteria for bolted and riveted joints (New York: Wiley 1987).
4.
BlakeA.Practical stress analysis in engineering design (New York: Marcel Dekker Inc. 1990).
5.
GouldH. H.MikicB. B.Areas of contact and pressure distribution in bolted jointsTrans. ASME, J. Engng Indust.9431972864–870.
6.
IremanT.Three-dimensional stress analysis of bolted single-lap composite jointsCompos. Struct.431998195–216.
7.
HwaC. W.ShiawL. S.TyanY. J.Three-dimensional contact stress analysis of a composite laminate with bolted jointCompos. Struct.301995287–297.
8.
CooperC.TurveyG. J.Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet materialCompos. Struct.321995217–226.
9.
KeikhosravyM.Finite element modelling and stress analysis of Al-alloy 7075-T6 bolted joints due to combined clamping and longitudinal tensile load (Semnan Branch, Iran: Islamic Azad University2007) Bachelor's Final Project Islamic Azad University, Semnan Branch, Iran, 2007.
10.
OskoueiR. H.ChakherlouT. N.Reduction in clamping force due to applied longitudinal load to aerospace structural bolted platesAerosp. Sci. Technol.1362009325–330 DOI:10.1016/j.ast.2009.06.001.
11.
Hemmati VandE.OskoueiR. H.ChakherlouT. N.An experimental method for measuring clamping force in bolted connections and effect of bolt threads lubrication on its value. In Proceedings of the World Academy of Science, Engineering and Technology, The Fifth International Conference on Applied Mechanics and Mechanical Engineering, Bangkok, Thailand, December 2008, vol. 36, pp. 457–460.
12.
AndreassonN.MackinlayC. P.SoutisC.Experi-mental and numerical failure analysis of bolted joints in CFRP woven laminatesRAeS, Aeronaut. J.10210181998445–450.
13.
ShankarK.DhamariR.Fatigue behaviour of aluminium alloy 7075 bolted joints treated with oily film corrosion compoundsMater. Des.232002209–216.
14.
YanY.WenW. D.ChangF. K.ShyprykevichP.Experimental study on clamping effects on the tensile strength of composite plates with a bolt-filled holeComposites: Part A3019991215–29.
15.
AragonA.AlegreJ. M.Gutierrez-SolanaF.Effect of clamping force on the fatigue behaviour of punched plates subjected to axial loadingEng. Failure Anal.132006271–281.
16.
MinguezJ. M.VogwellJ.Effect of tightening torque on the fatigue strength of bolted jointsEng. Failure Anal.1320061410–1421.
17.
ChakherlouT. N.OskoueiR. H.An investigation on fatigue failure modes of aluminium alloy 7075-T6 bolted jointsAmirkabir Int. J. Sci. Technol.1866-B (2007): 45–54.
18.
ChakherlouT. N.OskoueiR. H.VogwellJ.Experi-mental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted platesEng. Failure Anal.152008563–574.
19.
ChakherlouT. N.AbazadehB.VogwellJ.The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracksEng. Failure Anal.162009242–253.
20.
MustoJ. C.KonkleN. R.Computation of member stiffness in the design of bolted jointsJ. Mech. Des.12820061357–1360.
21.
MeyerG.StrelowD.Simple diagrams aid in analyzing forces in bolted jointsAssembly Eng. (197228–33.
ItoY.ToyodaJ.NagataS.Interface pressure distribution in a bolt-flange assembly (1977 ASME paper 77-WA/DE-11.
24.
MontgomeryJ.Methods for modeling bolts in the bolted joint. In Proceedings of the ANSYS User's Conference, 2002.
25.
KimJ.YoonJ. C.KangB. S.Finite element analysis and modeling of structure with bolted jointsAppl. Math. Modell.312007895–911.
26.
Airframe & powerplant mechanics: General handbook (Washington, DC: US Government Printing Office1976) ch. 6.
27.
ANSYS release 9.0 documentation. ANSYS Elements Reference, Part I, Element Library, SOLID45..
28.
OskoueiR. H.An investigation into bolt clamping effects on distribution of stresses and strains near fastener hole and its effect on fatigue life (Iran: University of Tabriz2005) Master's Thesis.
29.
ANSYS release 9.0 documentation. ANSYS Elements Reference, Part I, Element Library, CONTA173..
