Measurement and analysis of three-dimensional flow in a centrifugal fan volute with large volute width and rectangular cross-section

Abstract

Among all the elements of a centrifugal fan, the volute is the one that has the lowest flow efficiency. Therefore, improving the performance of the volute is an efficient way to improve the total performance of a centrifugal fan. To contribute a better understanding of the flow structure in the fan volute, the three-dimensional flow in a centrifugal fan volute with a large volute width and rectangular cross-section has been measured in detail by means of five-hole probe at three different flowrates. The time-average swirling and throughflow velocity, static and total pressure distributions on eight cross-sections in the throughflow direction of the volute are presented. The results show the formation and development of the flow in the fan volute of this type, indicate the variation of flow parameters, and discover some peculiar flow phenomena different from the traditional understanding. On the basis of the experimental results, the main hydraulic losses in this kind of fan volute have been preliminarily classified and analysed. The results show that the traditional one-dimensional design method of the volute should be further improved as it is only based on the law of momentum moment conservation and the ideal assumption that the distribution of flow parameters are uniform at the volute inlet.

Keywords

centrifugal fan volute three-dimensional flow measurement and analysis different flowrates hydraulic losses

Get full access to this article

View all access options for this article.

References

Jiang

Et al. Analytical calculation and experimental study on the quasi-three-dimensional flow field of volute (in Chinese). J. Xi'an Jiaotong Univ., 1989, 23 (5), 101–108.

Cao

Et al. Experimental study of scroll flow field in centrifugal fans (in Chinese). Fluid Eng., 1990, 18 (4), 8–12.

Van den Braembussche

Et al. Experimental and theoretical study of the swirling flow in centrifugal compressor volutes. Trans. ASME, J. Turbomach., 1990, 112 (1), 38–43.

Elholm

Experimental study of the swirling flow in the volute of a centrifugal pump. Trans. ASME, J. Turbomach., 1992, 114 (2), 366–372.

Cao

Experiment and analysis of the flow in a volute with a rectangular section shape (in Chinese). Fluid Eng., 1992, 20 (7), 6–10.

Ayder

Et al. Experimental and theoretical analysis of the flow in a centrifugal compressor volute. Trans. ASME, J. Turbomach., 1993, 115 (3), 582–589.

Ayder

Et al. Numerical analysis of the three-dimensional swirling flow in centrifugal compressor volutes. Trans. ASME, J. Turbomach., 1994, 116 (3), 462–468.

Et al A two-dimensional inverse design method for the volute casing of a centrifugal compressor (in Chinese). Chin. J. Appl. Mech., 1995, 12 (3), 33–37.

Et al. A new approach to the design of fan volute profiles. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Scienc, 1996, 210 (C3), 287–294.

10.

Et al. The theoretical research and analysis of the two-dimensional design of the volute (in Chinese). J. Xi'an Jiaotong Univ., 1997, 31 (8), 49–54.

11.

Pan

Et al. A computational and experimental evaluation of the performance of a centrifugal fan volute. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 1998, 212 (A4), 235–246.

12.

Huang

Et al. An experiment of the flow field Inside the volute of the forward multi-blade centrifugal fan (in Chinese). J. Shanghai Jiaotong Univ., 1999, 33 (3), 285–288.

13.

Ayder

Et al. Improved model for the design and analysis of centrifugal compressor volutes. Trans. ASME, J. Turbomach., 1999, 121 (3), 619–625.

14.

Pan

The numerical analysis and improved design research of the inner flow characteristics of the volute (in Chinese). Fluid Mach., 1999, (1), 14–18.

15.

Cao

Zhang

Wen

Measurement and analysis of three-dimensional flow in a centrifugal fan volute at low flowrate (in Chinese). J. Xi'an Jiaotong Univ., 2002, 36 (7), 688–692.