Thermodynamic processes in solid oxide and other fuel cells

Abstract

Following a review of thermodynamic processes in a generalized fossil-fuelled power system, the theoretical efficiencies of systems based on the isothermal oxidation of methane are discussed. The fuel cell is introduced as a device that converts the change of Gibbs free energy (ΔG) in isothermal oxidation directly to electricity. Ideal efficiencies of fuel cell systems are presented.

The Gibbs free energy change in isothermal oxidation of methane is 99 per cent of its lower heating value (LHV). However, direct electrochemical oxidation is not practical yet. Taking this and other factors into account the reversible electrical work from an internally reforming fuel cell could represent ∼79 per cent of the lower heating value at 600°C, falling to ∼67 per cent at 1000°C. With a bottoming heat engine the combined reversible work could be >80 per cent of LHV over this range. Adding such a device as a topping element to a conventional heat engine based system seems a logical next step in the evolution of the efficient fossil-fuelled power plant.

Keywords

thermodynamic processes fossil-fuelled power plant fuel cell oxidation reforming

Get full access to this article

View all access options for this article.

References

Hatsopoulos

G. N.

Keenan

J. H.

Principles of General Thermodynamics , 1965, Ch. 40 (John Wiley, New York).

Kotas

T. J.

The Exergy Method of Thermal Plant Analysis , 1985, Secs 2.5 and 4.6 (Butterworths, Oxford).

Baker

J. N.

Evans

R. J. D.

Initial studies on the market potential for SPFC and SOFC systems (summary report). DTI Advanced Fuel Cells Programme, report ETSU F/03/00080/REP, 1996.

Kordesch

Simader

Fuel Cells and Their Applications , 1996, (VCH).

1996 Fuel Cell Seminar Abstracts , November 1997 (Courtesy Associates, Washington D.C.).

Steinfield

Maru

H. C.

Sanderson

P. E.

High efficiency direct fuel cell hybrid power cycle for near term application. In 1996 Fuel Cell Seminar Abstracts, November 1997, p. 454 (Courtesy Associates, Washington D.C.).

Veyo

S. E.

Tubular solid oxide fuel cell demonstration activities. In Proceedings of Second IFCC, Kobe, Japan, 5–8 February 1996, p. 271.

Parker

W. G.

Bevc

SureCELL™ integrated solid oxide fuel cell/combustion turbine power plants for distributed power applications. In Proceedings of Second IFCC, Kobe, Japan, 5–8 February 1996, p. 275.

Minh

N. Q.

Kelly

Montgomery

Development of cell and stack fabrication technologies for reduced temperature solid oxide fuel cells. In Proceedings of Second European Fuel Cell Forum, Oslo, 6–10 May 1996, p. 659.