The effect of gas turbine coolant modulation on the part load performance of combined cycle plants. Part 2: Combined cycle plant

Abstract

For combined cycle plants that consist of heavy-duty gas turbine and single-pressure heat recovery steam generator, the effect of gas turbine coolant modulation on plant performance is analysed. Two distinct schemes for gas turbine load control are adopted (the fuel-only control and the variable compressor geometry control), based on the gas turbine calculation in Part 1 of this series of papers. Models for heat recovery steam generator and steam turbine are combined with the gas turbine models of Part 1 to result in a complete analysis routine for combined cycles. The purpose of gas turbine coolant modulation is to minimize coolant consumption by maintaining the turbine blade temperatures as high as possible. It is found that the coolant modulation leads to reduction in heat recovery capacity, which decreases steam cycle power. However, since the benefit of coolant modulation for the gas turbine cycle is large enough, the combine cycle efficiency is improved.