Development of improved blade tip endplate concepts for low-noise operation in industrial fans

Abstract

The application of improved blade tip geometries is studied with the aim of identifying an effective design concept for industrial fan passive noise control. The concept developed optimizes a datum blade by means of profiled endplates at the tip, reducing fan noise by changing the tip leakage flow behaviour. Experimental and computational investigations have been carried out on a family of axial fans, in fully ducted configuration, to establish the aerodynamic merits of the proposed blade tip design concept. The flow mechanisms in the fan tip region are correlated to specific blade design features that promote a reduction of the fan aero-acoustic signature in both tonal and broadband noise components. The tip vortical flow structures are characterized, and their role in creation of overall stage acoustic emissions clarified. The reported research identifies modification of tip geometry as markedly affecting the multiple vortex behaviour of blade tip leakage flow by altering the near-wall fluid flow paths on both blade surfaces. Blade tip endplates were also demonstrated to influence the rotor loss behaviour in the blade tip region. Improvement of rotor efficiency was correlated to the control of tip leakage flows.

Keywords

industrial fans endplates tip leakage flow passive noise control

Get full access to this article

View all access options for this article.

References

Fukano

Takamatsu

The effects of tip clearance on the noise of low-pressure axial and mixed flow fans. J. Sound Vibr., 1986, 105, 291–308.

Storer

J. A.

Cumpsty

N. A.

Tip leakage flow in axial compressors. J. Turbomach., 1991, 113, 252–259.

Furukawa

Inoue

Saiki

Yamada

The role of the tip leakage vortex breakdown in compressor rotor aerodynamics. J. Turbomach., 1999, 121, 469–480.

Fukano

Jang

Tip clearance noise of axial flow fans operating at design and off-design condition. J. Sound Vibr., 2004, 275, 1027–1050.

Jang

Fukano

Furukawa

Effects of the tip clearance on vortical flow and its relation to noise in an axial flow fan. JSME Trans. B, 2003, 46, 356–365.

Quinlan

D. A.

Bent

P. H.

High frequency noise generation in small axial flow fans. J. Sound Vibr., 1998, 218, 177–204.

Vad

Koscso

Gutermuth

Kasza

Tabi

Csorgo

Study of the aero-acoustic and aerodynamic effects of soft coating upon airfoil. JSME Trans. C, 2006, 49, 648–656.

Bae

J. W.

Breuer

K. S.

Tan

C. S.

Active control of tip clearance flow in axial compressors. J. Turbomach., 2005, 127, 352–362.

Roy

Chouhan

Kaundinya

K. V.

Experimental study of boundary layer control through tip injection on straight and swept compressor blades. ASME paper GT2005-68304, 2005.

10.

Wadia

A. R.

Szucs

P. N.

Crall

D. W.

Inner workings of aerodynamic sweep. J. Turbomach., 1998, 120, 671–682.

11.

Corsini

Rispoli

Using sweep to extend stall-free operational range in axial fan rotors. Proc. Instn Mech. Engrs. Part A: J. Power and Energy, 2004, 218, 129–139.

12.

Corsini

Rispoli

Kinghorn

I. R.

Sheard

A. G.

The aerodynamic interaction of tip leakage and mainstream flows in a fully-ducted axial fan. ASME paper GT2004-53408, 2004.

13.

Takata

Tsukuda

Stall margin improvement by casing treatment - its mechanism and effectiveness. J. Eng. Power, 1977, 99, 121–133.

14.

Smith

G. D. J.

Cumpsty

N. A.

Flow phenomena in compressor casing treatment. J. Eng. Gas Turbines Power, 1984, 106, 532–541.

15.

Thompson

D. W.

King

P. I.

Rabe

D. C.

Experimental and computational investigation on stepped tip gap effects on the flowfield of a transonic axial-flow compressor rotor. J. Turbomach., 1998, 120, 477–486.

16.

Jensen

C. E.

Axial-flow fan. US Pat. 4,630,993, 1986.

17.

Wadia

A. R.

Booth

T. C.

Rotor-tip leakage: Part II - design optimization through viscous analysis and experiment. J. Eng. Power, 1982, 104, 162–169.

18.

Wadia

A. R.

Numerical calculations of time dependent three-dimensional viscous flows in a blade passage with tip clearance. AIAA paper 83-1171, 1983.

19.

Longet

C. M. L.

Axial flow fan with noise reducing means. US Pat. 2003/0123987 A1, 2003.

20.

Mimura

Axial flow fan. US Pat. 6,648,598 B2, 2003.

21.

Belady

C. L.

Winglet-enhanced fan. US Pat. 6,776,578 B2, 2004.

22.

Uselton

R. B.

Cook

L. J.

Wright

Fan with reduced noise generation. US Pat. 2005/0147496 A1, 2005.

23.

Corsini

Rispoli

Kinghorn

I. R.

Sheard

A. G.

Investigation on improved blade tip concept. ASME paper GT2006-90592, 2006.

24.

Corsini

Sheard

A. G.

Tip end-plate concept based on leakage vortex rotation number control. J. Comput. Appl. Mech., 2007, accepted for publication.

25.

Borello

Corsini

Rispoli

A finite element overlapping scheme for turbomachinery flows on parallel platforms. Comput. Fluids, 2003, 32(7), 1017–1047.

26.

Corsini

Rispoli

Santoriello

A new stabilized finite element method for advection-diffusion-reaction equations using quadratic elements. In Modelling fluid flow (Eds Lajos

), 2003, pp. 247–268 (Springer-Verlag, Berlin).

27.

Corsini

Rispoli

Flow analyses in a high-pressure axial ventilation fan with a non-linear eddy-viscosity closure. Int. J. Heat Fluid Flow, 2005, 26, 349–361.

28.

Inoue

Kuroumaru

Furukawa

Behavior of tip leakage flow behind an axial compressor rotor. J. Gas Turbine Power, 1986, 108, 7–14.

29.

Inoue

Furukawa

Physics of tip clearance flow in turbomachinery. ASME paper FEDSM2002-31184, 2002.

30.

Craft

T. J.

Launder

B. E.

Suga

Development and application of a cubic eddy-viscosity model of turbulence. Int. J. Heat Fluid Flow, 1996, 17, 108–155.

31.

Gbadebo

S. A.

Cumpsty

N. A.

Hynes

T. P.

Interaction of tip clearance flow and three-dimensional separations in axial compressors. ASME paper GT2006-90071, 2006.

32.

Khourrami

M. R.

Choudari

A novel approach for reducing rotor tip-clearance induced noise in turbo-fan engines. AIAA paper 2001-2148, 2001.