In this work, the optimization of the flame properties associated to a laminar burner is carried out using different optimization methods (genetic algorithm, Simplex) when varying the fuel/air ratio in a primary and a secondary inlet. The objective is to reduce the CO emission at a prescribed distance from the injection plane. An in-house computer package, called OPAL, controls the optimization process in a fully automatic manner. The flow involving chemical reactions is solved using the in-house computational fluid dynamics code UGC+.
HilbertR.JanigaG.BaronR.ThéveninD.Multiobjective shape optimization of a heat exchanger using parallel genetic algorithms. Int. J. Heat Mass Transf.2006, 49(15-16), 2567–2577.
2.
ThéveninD.ZähringerK.JanigaG.Automatic optimization of two-dimensional burners. In Proceedings of the European Combustion Meeting ECM05, Louvain-la-Neuve, Belgium, 2005, pp. 240/241–240/246.
3.
FalcoI. D.An introduction to evolutionary algorithms and their application to the aerofoil design problem-part I: the algorithms. von Kármán Lecture Series on Fluid Dynamics, Bruxelles, Belgium, April 1997.
4.
MäkinenR.NeittaanmäkiP.PériauxJ.ToivanenJ.A genetic algorithm for multiobjective design optimization in aerodynamics and electromagnetics. In Proceedings of the ECCOMAS 98 Conference on Computational fluid dynamics '98 (Eds PapailiouK. D.TsahalisD.PériauxJ.KnörzerD.), 1998, pp. 418–422 (Wiley, Athens, Greece).
HanS. Y.MaengJ. S.Shape optimization of cut-off in a multi-blade fan/scroll system using neural network. Int. J. Heat Mass Transf., 2003, 46(15), 2833–2839.
7.
FabbriG.Heat transfer optimization in corrugated wall channels. Int. J. Heat Mass Transf., 2000, 43(23), 4299–4310.
8.
ChengC. H.ChangM. H.Shape design for a cylinder with uniform temperature distribution on the outer surface by inverse heat transfer method. Int. J. Heat Mass Transf., 2003, 46(1), 101–111.
9.
LeeK. S.KimW. S.SiJ. M.Optimal shape and arrangement of staggered pins in the channel of a plate heat exchanger. Int. J. Heat Mass Transf., 2001, 44(17), 3223–3231.
10.
FabbriG.Heat transfer optimization in internally finned tubes under laminar flow conditions. Int. J. Heat Mass Transf., 1998, 41(10), 1243–1253.
BonjourJ.RochaL. A. O.BejanA.MeunierF.Dendritic fins optimization for a coaxial two-stream heat exchanger. Int. J. Heat Mass Transf., 2004, 47(1), 111–124.
13.
FabbriG.Effect of viscous dissipation on the optimization of the heat transfer in internally finned tubes. Int. J. Heat Mass Transf., 2004, 47(14-16), 3003–3015.
14.
FoliK.OkabeT.OlhoferM.JinY.SendhoffB.Optimization of micro heat exchanger: CFD, analytical approach and multi-objective evolutionary algorithms. Int. J. Heat Mass Transf., 2006, 49(5-6), 1090–1099.
15.
EdwardsK.EdgarT. F.ManousiouthakisV. I.Kinetic model reduction using genetic algorithms. Comput. Chem. Eng., 1998, 22(1-2), 239–246.
16.
ElliottL.InghamD. B.KyneA. G.MeraN. S.PourkashanianM.WilsonC. W.Multiobjective genetic algorithm optimization for calculating the reaction rate coefficients for hydrogen combustion. Ind. Eng. Chem. Res., 2003, 42(6), 1215–1224.
17.
ElliottL.InghamD. B.KyneA. G.MeraN. S.PourkashanianM.WilsonC. W.Reaction mechanism reduction and optimization using genetic algorithms. Ind. Eng. Chem. Res., 2005, 44(4), 658–667.
18.
BücheD.StollP.KoumoutsakosP.An evolutionary algorithm for multi-objective optimization of combustion processes. Center for Turbulence Research Annual Research Briefs 2001, 2001, pp. 231–239.
19.
BücheD.StollP.DornbergerR.KoumoutsakosP.Multiobjective evolutionary algorithm for the optimization of noisy combustion processes. IEEE Trans. Syst. Man Cybern. C, Appl. Rev., 2002, 32(4), 460–473.
20.
PaschereltC. O.SchuermansB.BücheD.Combustion process optimization using evolutionary algorithm. In Proceedings of American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo, 2003, vol. 2, pp. 281–291, 2003-GT-38393.
LindstedtP.Modelling of the chemical complexities of flames. Proc. Combust. Inst., 1998, 27, 269–285.
26.
PaxionS.Développement d'un solveur multigrille nonstructuré parallèle pour la simulation de flammes laminaires en chimie et transport complexes. PhD Thesis 1999-40, 1999 (École Centrale Paris, France).
27.
BaronR.Calcul et optimisation de brûleurs laminaires industriels. PhD Thesis 2000-37, 2002 (École Centrale Paris, France).
BaronR.PaxionS.GicquelO.SimousN.BastianP.ThéveninD.Development of a 3D parallel multigrid solver for fast and accurate laminar steady flame computations. In Numerical flow simulation III (Ed. HirschelE. H.), pp. 115–128 (Springer-Verlag, Berlin).
30.
NelderJ. A.MeadR.A simplex method for function minimization. Comput. J., 1965, 7, 308–313.
31.
FletcherR.Practical methods of optimization, 1987 (John Wiley & Sons, New York).
32.
JanigaG.GordnerA.ShalabyH.ThéveninD.Simulation of laminar burners using detailed chemistry on parallel computers. European Conference on Computational Fluid Dynamics, ECCOMAS CFD 2006, 2006, pp. 210/1–210/14.
33.
van OijenJ. A.de GoeyL. P. H.Modelling of premixed laminar flames using flamelet-generated manifolds. Combust. Sci. Technol., 2000, 161, 113–137.
34.
BongersH.van OijenJ. A.SomersL. M. T.de GoeyL. P. H.The flamelet-generated manifold method applied to steady planar partially premixed counterflow flames. Combust. Sci. Technol., 2005, 177(12), 2373–2393.
35.
MaasU.PopeS. B.Simplifying chemical kinetics: Intrinsic low-dimensional manifolds in composition space. Combust. Flame, 1992, 88(3-4), 239–264.
36.
FiorinaB.BaronR.GicquelO.ThéveninD.CarpentierS.DarabihaN.Modelling nonadiabatic partially premixed flames using flame-prolongation of ILDM. Combust. Theory Model., 2003, 7(3), 449–470.
37.
FiorinaB.GicquelO.CarpentierS.DarabihaN.Validation of the FPI chemistry reduction method for diluted nonadiabatic premixed flames. Combust. Sci. Technol., 2004, 176(5-6), 785–797.
38.
FiorinaB.GicquelO.VervischL.CarpentierS.DarabihaN.Approximating the chemical structure of partially premixed and diffusion counterflow flames using FPI flamelet tabulation. Combust. Flame, 2005, 140(3), 147–160.
39.
MarosI.Computational techniques of the simplex method, 2003 (Kluwer Academic Publishers, Boston).
