Performance optimization for an open-cycle gas turbine power plant with a refrigeration cycle for compressor inlet air cooling. Part 1: Thermodynamic modelling

Abstract

A thermodynamic model of an open cycle gas turbine power plant with a refrigeration cycle for compressor inlet air cooling with pressure drop irreversibilities is established using finite-time thermodynamics in Part 1 of this article. The flow processes of the working fluid with the pressure drops of the working fluid and the size constraints of the real power plant are modelled. There are 12 flow resistances encountered by the working fluid stream for the cycle model. Three of these, the friction through the blades, vanes of the compressor, and the turbines, are related to the isentropic efficiencies. The remaining flow resistances are always present because of the changes in the flow cross-section at the mixing chamber inlet and outlet, the compressor inlet and outlet, the combustion chamber inlet and outlet, the heat exchanger inlet and outlet, and the turbine inlet and outlet. These resistances associated with the flow through various cross-sectional areas are derived as functions of the mixing chamber inlet relative pressure drop, and they control the air flowrate and the net power output. The analytical formulae about the power output, efficiency, and other coefficients are derived with the 12 pressure drop losses. The numerical examples show that the dimensionless power output reaches its maximum at the optimal value and that the dimensionless power output and the thermal efficiency reach their maximum values at the optimal values of the compressor fore-stages pressure ratio of the inverse Brayton cycle.

Keywords

gas turbine cycle refrigeration cycle cooling power efficiency pressure drop loss finite-time thermodynamics

Get full access to this article

View all access options for this article.

References

Sieniutycz

Salamon

, Advances in thermodynamics. Volume 4: Finite time thermodynamics and thermoeconomics (New York: Taylor & Francis 1990).

Feidt

, Thermodynamique et optimisation energetique des systems et procedes 2nd edition (Lavoisier, Paris: Technique et Documentation 1996).

Bejan

Entropy generation minimization: The new thermodynamics of finite-size devices and finite time processes

J. Appl. Phys. 79 3 (1996): 1191–1218.

Chen

Sun

Finite time thermodynamic optimization or entropy generation minimization of energy systems

J. Non-Equilibr. Thermodyn. 24 4 (1999): 327–359.

Berry

R. S.

Kazakov

V. A.

Sieniutycz

Szwast

Tsirlin

A. M.

, Thermodynamic optimization of finite time processes (Chichester: Wiley 1999).

Chen

Sun

, Advances in finite time thermodynamics: Analysis and optimization (New York: Nova Science Publishers 2004).

Durmayaz

Sogut

O. S.

Sahin

Yavuz

Optimization of thermal systems based on finite-time thermodynamics and thermoeconomics

Prog. Energy Combust. Sci. 30 2 (2004): 175–217.

Chen

, Finite time thermodynamic analysis of irreversible processes and cycles (in Chinese) (Beijing: Higher Education Press 2005).

Bejan

Vargas

J. V. C.

Optimal allocation of a heat exchanger inventory in heat driven refrigerators

Int. J. Heat Mass Transf. 38 16 (1995): 2997–3004.

10.

Klein

S. A.

Reindl

D. T.

The relationship of optimum heat exchanger allocation and minimum entropy generation rate for refrigeration cycles

Trans. ASME, J. Energy Res. Technol. 120 2 (1998): 172–178.

11.

Feidt

Costea

Petre

Petrescu

Optimization of direct Carnot cycle

Appl. Therm. Eng. 27 5–6 (2007): 829–839.

12.

Sarkar

Bhattacharyya

Overall conductance and heat transfer area minimization of refrigerators and heat pumps with finite heat reservoirs

Energy Convers. Manage. 48 3 (2007): 803–808.

13.

Radcenco

Apostol

Feidt

Optimization of a Brayton—Joule engine subject to mass transfer limitations due to pressure losses

Rev. Inst. Fr. Petrole 53 1 (1998): 103–110.

14.

Radcenco

Vargas

J. V. C.

Bejan

Thermodynamic optimization of a gas turbine power plant with pressure drop irreversibilities

Trans. ASME, J. Energy Res. Technol. 120 3 (1998): 233–240.

15.

Chen

Sun

Power optimization of open-cycle regenerator gas-turbine power plants

Appl. Energy 78 2 (2004): 199–218.

16.

Wang

Chen

Sun

Performance optimization of an open-cycle intercooled gas turbine power plant with pressure drop irreversibilities

J. Inst. Energy 81 1 (2008): 31–37.

17.

Zhang

Chen

Sun

Optimal performance of combined Brayton and inverse Brayton cycles

Chin. J. Eng. Thermophys. 29 8 (2008): 1161–1266.

18.

Chen

Zhang

Sun

Power and efficiency optimization for combined Brayton and two parallel inverse Brayton cycles. Part 1: Description and modelling

Proc. IMechE, Part C: J. Mechanical Engineering Science 222 C3 (2008): 393–403 DOI: 10.1243/09544062JMES640A.

19.

Zhang

Chen

Sun

Power and efficiency optimization for combined Brayton and two parallel inverse Brayton cycles. Part 2: Performance optimization

Proc. IMechE, Part C: J. Mechanical Engineering Science 222 C3 (2008): 405–414 DOI: 10.1243/09544062JMES640B.

20.

Bejan

, Entropy generation through heat and fluid flow (New York: Wiley 1982).

21.

Radcenco

, Generalized thermodynamics (Bucharest: Editura Techica 1994).

22.

Bejan

Maximum power from fluid flow

Int. J. Heat Mass Transf. 39 6 (1996): 1175–1181.

23.

Bejan

, Entropy generation minimization (Boca Raton, FL: CRC Press 1996).

24.

Bejan

, Advanced engineering thermodynamics 2nd edition (New York: Wiley 1997).

25.

Chen

Sun

Performance characteristic of fluid flow converters

J. Inst. Energy 71 489 (1998): 209–215.

26.

Chen

Influence of nonlinear flow resistance relation on the power and efficiency from fluid flow

J. Phys. D: Appl. Phys. 32 12 (1999): 1346–1349.

27.

Saravanamutto

Rogers

Cohen

, Gas turbine theory 5th edition (Englewood Cliffs, NJ: Prentice-Hall 2001).

28.

Alhazmy

M. M.

Najjar

Y. S. H.

Augmentation of gas turbine performance using air cooler

Appl. Therm. Eng. 24 2–3 (2004): 415–429.

29.

Zadpoor

A. A.

Golshan

A. H.

Performance improvement of a gas turbine cycle using a desiccant-based evaporative cooling system

Energy 31 14 (2006): 2652–2664.

30.

Zaki

G. M.

Jassim

R. K.

Alhazmy

M. M.

Brayton refrigeration cycle for gas turbine inlet air cooling

Int. J. Energy Res. 31 13 (2007): 1292–1306.

31.

Bejan

, Heat transfer (New York: Wiley 1993).

32.

Gordon

C. O.

, Aerodynamics of aircraft engine components (New York: AIAA 1985).

33.

Moran

Shapiro

, Fundamentals of engineering thermodynamics (New York: Wiley 2004).

34.

Korakianitis

Wilson

D. G.

Models for predicting the performance of Brayton-cycle engines

Trans. ASME, J. Eng. Gas Turbine Power 116 2 (1994): 381–388.

35.

Radcenco

, Optimzation criteria for irreversible thermal processes (Bucharest: Editura Tehnica 1979).

36.

Brown

Jubran

B. A.

Martin

B. W.

Coolant optimization of a gas turbine engine

Proc. IMechE, Part A: J. Power and Energy 207 A1 (1993): 31–47 DOI: 10.1243/PIME_PROC_1993_207_005_02.