A low-cost electricity generator for rural areas using a travelling-wave looped-tube thermoacoustic engine

Abstract

This article describes the construction and preliminary testing of a pre-prototype thermoacoustic electricity generator to test the concept of a low-cost device for application in remote or rural areas of developing countries. A travelling-wave thermoacoustic engine with a configuration of a looped-tube resonator is designed and constructed to convert heat to acoustic power. Air at atmospheric pressure is used as the working gas, PVC tubing is utilized for the feedback pipe, whereas an inexpensive commercially available loudspeaker is adopted to convert the acoustic power, produced by the engine, to electricity. Preliminary experimental results are presented and discussed in detail. The results show that the approach is feasible in principle and it is possible to produce the electrical power levels in the order of 4–5 W with overall heat-to-electric efficiencies in the order of 1 per cent. Further work towards optimizing the device from the performance, manufacturing, and cost points of view is outlined.

Keywords

thermoacoustic engine electricity generator travelling wave

Get full access to this article

View all access options for this article.

References

Swift

G. W.

, ‘Analysis and performance of a large thermoacoustic engine’ J. Acoust. Soc. Am. 92 3 (1992): 1551–1563.

Backhaus

Swift

G. W.

, ‘A thermoacoustic-Stirling heat engine: Detailed study’ J. Acoust. Soc. Am 107 (2000): 3148–3166.

De Blok

C. M.

, ‘Low operating temperature integral thermoacoustic devices for solar cooling and waste heat recovery’ In Proceedings of the Acoustics'08, Paris, France, 29 June–4 July 2008.

Wollan

J. J.

Swift

G. W.

Backhaus

Gardner

D. L.

, ‘Development of a thermoacoustic natural gas liquefier’ In Proceedings of the AIChE Meeting, New Orleans, Los Angeles, 2002.

Backhaus

Tward

Petach

, ‘Travelling-wave thermoacoustic electric generator’ Appl. Phys. Lett. 85 6 (2004): 1085–1087.

Riley

P. H.

Johnson

, ‘Generating electricity from burning wood using thermo-acoustics for use in developing countries’ In Proceedings of the Acoustics'08, Paris, France, June 29–July 4 2008.

Riley

P. H.

Saha

Johnson

C. J.

, ‘Designing a low-cost, electricity generating cooking stove’ IEEE Technol. Soc. Mag. 29 2 (2010): 47–53.

Jordan

E. J.

, Loudspeakers (London: Focal Press 1963).

Swift

G. W.

, Thermoacoustics, a unifying perspective for some engine and refrigerators (New York: Acoustical Society of America 2002) http://www.bcspeakers.com.

10.

Ward

W. C.

Swift

G. W.

, ‘Design environment for low-amplitude thermoacoustic engines’ J. Acoust. Soc. Am. 95 6 (1994): 3671–3672.