Performance characteristics of multi-evaporator transcritical CO 2 refrigeration cycles with hybrid compression/ejection

Abstract

The theoretical analyses and optimization studies of two novel multi-evaporator transcritical CO₂ refrigeration systems using constant pressure mixing ejector are presented in this article. Comparisons of novel hybrid compression—ejection CO₂ cycles, based on coefficient of performance (COP) improvement over conventional cycle and other optimum parameters, are also done for various operating conditions. Study shows that the cycle performance is dependent on allocation of evaporator cooling capacities for both cycles. The optimum discharge pressure for both cycle layouts compared to corresponding basic cycle reduces by the use of ejection—compression. For both cycle layouts, the effect of gas cooler exit temperature on COP improvement is negligible, whereas the COP improvement at optimum condition increases with the increase in temperature difference between evaporators. Results reveal that the CYC1 is superior due to lower discharge pressure and significantly higher COP improvement (maximum of 38.1 per cent for CYC1 whereas 21.4 per cent for CYC2 at optimum condition for the studied ranges).

Keywords

multi-evaporator hybrid compression—ejection optimization performance improvement comparison

Get full access to this article

View all access options for this article.

References

Sarkar

Bhattacharyya

Ramgopal

, ‘Transcritical CO₂ heat pump systems: Exergy analysis including heat transfer and fluid flow effects’ Energy Convers. Manage. 46 13–14 (2005): 2053–2067.

Liu

J. P.

Chen

J. P.

Chen

Z. J.

, ‘Thermodynamic analysis on trans-critical R744 vapor compression/ejection hybrid refrigeration cycle’ In Proceedings of the Fifth IIR Gustav Lorentzen Conference onNatural working fluids, Guangzhou, China, 2002, pp. 184–188.

Ozaki

Takeuchi

Hirata

, ‘Regeneration of expansion energy by ejector in CO₂ cycle’ In Proceedings of the Sixth IIR Gustav Lorentzen NaturalWorking Fluid Conference, Glasgow, UK, 2004, paper 4/A/11.20.

Groll

E. A.

, ‘Transcritical CO₂ refrigeration cycle with ejector—expansion device’ Int. J. Refrig. 28 5 (2005): 766–773.

Deng

Jiang

, ‘Particular characteristics of transcritical CO₂ refrigeration cycle with an ejector’ Appl Therm. Eng. 27 2–3 (2007): 381–388.

Sarkar

, ‘Optimization of ejector—expansion transcritical CO₂ heat pump cycle’ Energy 33 9 (2008): 1399–1406.

Ksayer

E. B.

Clodic

, ‘CO₂ ejector refrigeration cycle: Design, tests and results’ In Proceedings of the 22nd International Congress of Refrigeration, Beijing, 2007, paper 1590.

Elbel

Hrnjak

, ‘Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation’ Int. J. Refrig. 31 3 (2008): 411–422.

Yari

Sirousazar

, ‘Cycle improvements to ejector—expansion transcritical CO₂ two-stage refrigeration cycle’ Int. J. Energy Res. 32 7 (2008): 677–687.

10.

Yari

, ‘Second law optimization of two-stage transcritical CO₂ refrigeration cycles in the cooling mode operation’ Proc. IMechE, Part A: J. Power and Energy 223 A5 (2009): 551–562.DOI: 10.1243/09576509JPE682.

11.

Yari

, ‘Performance analysis and optimization of a new two-stage ejector—expansion transcritical CO₂ refrigeration cycle’ Int. J. Therm. Sci. 48 10 (2009): 1997–2005.

12.

Elakdhar

Nehdi

Kairouani

, ‘Analysis of a compression/ejection cycle for domestic refrigeration’ Ind. Engng Chem. Res. 46 (2007): 4639–4644.

13.

Kairouani

Elakhdar

Nehdi

Bouaziz

, ‘Use of ejectors in a multi-evaporator refrigeration system for performance enhancement’ Int. J. Refrig. 32 6 (2009): 1173–1185.

14.

Sarkar

Bhattacharyya

Ramgopal

, ‘Natural refrigerant-based subcritical and transcritical cycles for high temperature heating’ Int. J. Refrig. 30 1 (2007): 3–10.