Rotating Heat Pipe Performance with Internal Wire Mesh Screens

Abstract

The performance of a rotating heat pipe was optimized in terms of the fluid charge ratio, speed of rotation, tapering angle together with relative positions, and the packing ratio of porous filling screens. The favourable effect of porous layers was testified by employing an inner liner along the whole tube interior surface to enhance both evaporation and condensation. The porosity effect was extended to include the whole pipe cross-section such that different configurations of screen layers packed together to form a turbulent extended heat transfer corrugated surface were investigated. It was found that the longitudinal temperature distribution along the heat pipe became more uniform as both the speed of rotation and the tapering angle increased, thus indicating a decrease in the heat pipe thermal resistance. Owing to the fact that enhanced evaporation and condensation take place, the overall heat transfer coefficient increased and the thermal capacity operational limits were extended by increasing the centrifugal acceleration within the stratified flow regime across the speed range of 0—700 r/min. The insertion of porous screens increased the rates of turbulent heat and mass transfer as well as the optimum charge ratio. By optimizing the porous configuration in terms of number of layers and bore size, the decrease in longitudinal temperature difference due to enhanced convection over-rode the increase in saturation temperature difference due to pressure drop. The increased fluid temperature uniformity in the core region, accompanied by severe radial temperature gradients close to the wall, thus revealed increased rates of convective heat transport.

Keywords

heat pipe rotation mesh screens

Get full access to this article

View all access options for this article.

References

Peterson

G. P.

An introduction to heat pipes: modeling, testing, and applications 1994, pp. 42–54 (John Wiley & Sons Inc., New York).

Ivanovski

M. N.

Sorokin

V. P.

Yagodkin

I. V.

The physical principles of heat pipes 1982, pp. 42–54 (Clarendon Press Oxford).

Nasr

M. A. E.

Gravity assisted heat pipes PhD Thesis, Ain Shams University, Cairo, Egypt, 1986).

Incropera

F. P.

Dewitt

D. P.

Introduction to heat transfer 1996, pp. 498–531 (John Wiley & Sons, New York).

Burdo

O. G.

Bezbah

I. V.

‘Rotating heat pipes in devices for heat treatment of the food stuffs’

Appl. Therm. Engng 2008, 28(4), 341–343.

Chen

Zhang

‘Theoretical and numerical analysis of convective heat transfer in the rotating helical pipes’

Int. J. Heat Mass Transf. , 2003, 46 4899–4909.

Marto

P. J.

Wagenseil

L. L.

‘Augmenting the condenser heat transfer performance of rotating heat pipes’

AIAA J. 1979, 17(6), 647–652.

Weigel

H. J.

Heat transfer performance of a rotating heat pipe using different condensers and working fluids MSc Thesis Naval Postgraduate School, Monterey, California, 1979).

Harley

Faghri

Two-dimensional rotating heat pipe analysis

J. Heat Transf. 1995 117(1), 202–208.

10.

Ling

Cao

Lopez

A. P.

Experimental investigations of radially rotating miniature high-temperature heat pipes

J. Heat Transf. 2001 123 (1) 113–119.

11.

Waowaew

Terdtoon

Maezawa

Kamonpet

Klongpanich

‘Correlation to predict heat transfer characteristics of a radially rotating heat pipe at vertical position’

Appl. Therm. Eng. 2003, 23(8), 1019–1032.

12.

Song

Ewing

Ching

C. Y.

‘Fluid flow and heat transfer model for high speed rotating heat pipes’

Int. J. Heat Mass Transf. 2003, 46(23) 4393–4401.

13.

Song

Ewing

Ching

C. Y.

‘Experimental investigation on the heat transfer characteristics of axial rotating heat pipes’

Int. J. Heat Mass Transf. 2004 47(22), 4721–4731.

14.

Nobari

M. R. H.

Gharali

A numerical study of flow and heat transfer in internally finned rotating straight pipes and stationary curved pipes

Int. J. Heat Mass Transf. , 2006 49, 1185–1194.

15.

Limoges

R. F.

The rotating heat pipe - Implementation as a uniform-temperature heat source. In Proceedings of the Winter Annual Meeting, American Society of Mechanical Engineers, Washington, DC, 1981, pp. 201–206.

16.

Lin

Faghri

‘Heat transfer analysis of stratified flow in rotating heat pipes with cylindrical and stepped walls’

Int. J. Heat Mass Transf. 1997, 40(18), 4393–4404.

17.

Atwaa

K. G.

Investigation of the factors affecting the rotating heat pipes performance PhD Thesis, Ain Shams University, Cairo, Egypt, 2004.

18.

Song

Ewing

Ching

C. Y.

Heat transfer in the evaporator section of moderate speed rotating heat pipes

Int. J. Heat Mass Transf. 2008, 51(7-8), 1542–1550.

19.

Daniels

T. C.

Danielsy

F. K.

Investigation of the factors affecting the performance of a rotating heat pipe

Int. J. Heat Mass Transf. 1975, 18, 961–973.

20.

Marto

P. J.

Performance characteristics of rotating wickless heat pipes In Proceedings of the 2nd International Heat Pipe Conference, Bologna, Italy, 1976, pp. 281–291.

21.

Song

Ching

C. Y.

Ewing

Fluid flow and heat transfer modeling in rotating heat pipes In Proceedings of the 4th International Heat Transfer Conference, Grenoble, France, 2002, pp. 211–217.

22.

Ling

Cao

Closed form analytical solutions for radially rotating miniature high temperature heat pipes including non-condensable gas effects

Int. J. Heat Mass Transf. 2000, 43, 3661–3671.

23.

Ling

Cao

Chang

W. S.

Analysis of radially rotating high temperature heat pipes for turbo-machinery applications

ASME J. Eng. Gas Turbines Power 1999 121(2), 306–312.

24.

Petrakis

M. A.

‘Technical note: Flow characteristics in a heated rotating straight pipe’

Int. J. Heat Mass Transf. 1998, 41, 4385–4392.

25.

Yildiz

Bicer

Pehlivan

‘Heat transfers and pressure drops in rotating helical pipes’

Appl. Energy 1995, 50, 85–94.

26.

Nakayama

Ohtsuka

Itoh

Yoshikawa

‘Optimum charge of working fluids in horizontal rotating heat pipes’

Heat and mass transfer in rotating machinery 1984, pp. 633–644 (Hemisphere Publishing Corp., Washington, DC).

27.

Marto

P. J.

Rotating heat pipes, heat and mass transfer in rotating machinery 1984, pp. 609–632 (Hemisphere Washington, DC).

28.

Gardner

G. H.

An experimental evaluation of the thermal performance of a rotating heat pipe with internal axial fins MSc Thesis, Naval Post Graduate School Monterey, California, 1983.

29.

Olson

G. L.

Optimization of an internally finned rotating heat pipe MSc Thesis Naval Postgraduate School Monterey California, USA, 1992.

30.

Lee

J. S.

Kim

C. J.

Heat transfer and internal flow characteristics of a coil inserted rotating heat pipe

Int J. Heat Mass Transf. 2001, 44, 3543–3551.

31.

Marto

Weigel

The development of economical rotating heat pipes In Proceedings of the 4th International Heat Pipe Conference, London, UK, 1981, pp. 709–724.

32.

Chaiyuth

Condensation heat transfer inside rotating heat pipes MSc Thesis, Naval Postgraduate School Monterey, California, USA, 1977.

33.

Kleinholz

A. F.

Analysis of smooth and axially finned, rotating heat pipe condensers MSc Thesis Naval Postgraduate School Monterey, California, USA, 1983.

34.

Sakalis

V. D.

Hatzikonstantinou

P. M.

Laminar heat transfer in the entrance region of internally finned square ducts

ASME J. Heat Transf. 2001, 123, 1030–1034.

35.

Saturnino

Heat-transfer studies of dropwise condensation and thin-film evaporation, Final report, Naval Civil Engineering Lab Port Hueneme, California, USA, 1963.

36.

Wagenseil

L. L.

Heat transfer performance of various rotating heat pipes MSc Thesis Naval Post Graduate School of Monterey California, 1976.

37.

Jankowski

T. A.

Razani

Apparatus for testing rotating heat pipes In Proceedings of the 9thAIAA/ASME Joint Thermophysics Heat Transfer Conference, San Francisco, California, 2006, pp. 119–126.

38.

Chen

Zhang

Fluid flow and mixed convection heat transfer in a rotating heat pipe

Int. J. Therm. Sci. 2003 42, 1047–1059.

39.

Marto

P. J.

Wagenseil

L. L.

Augmenting the condenser heat transfer performance of rotating heat pipes In Proceedings of the 3rd International Heat Pipe Conference, Palo Alto, California, 1978, pp. 147–154. JPE962 P.