Grasping a soft or fragile object requires the use of minimum contact force to prevent damage or deformation. Without precise knowledge of object parameters, real-time feedback control must be used with a suitable slip sensor to regulate the contact force and prevent slip. Furthermore, the controller must be designed to have good performance characteristics to rapidly modulate the fingertip contact force in response to a slip event. In this paper, a fuzzy sliding mode controller combined with a disturbance observer is proposed for contact force control and slip prevention. The controller is based on a system model that is suitable for a wide class of robotic gripper configurations. The robustness of the controller is evaluated through both simulation and experiment. The control scheme was found to be effective and robust to parameter uncertainty. When tested on a real system, however, chattering phenomena, well known to sliding mode research, was induced by the unmodelled suboptimal components of the system (filtering, backlash, and time delays), and the controller performance was reduced.
JockuschJ.WalterJ.RitterH.‘A tactile sensor system for a three-fingered robot manipulator.’ In Proceedings of the IEEE International Conference onRobotics and automation, Vols 1-4, Albuquerque, New Mexico, April 1997, pp. 3080–3086 (IEEE Press, Piscataway, New Jersey).
2.
YamadaY.MoritaH.UmetaniY.‘Slip phase isolating: Impulsive signal generating vibrotactile sensor and its application to real-time object regrip control.’Robotica18 (2000): 43–49
3.
TremblayM. R.CutkoskyM. R.‘Estimating friction using incipient slip sensing during a manipulation task.’ In Proceedings of the IEEE International Conference onRobotics and automation, Vols 1-3, Atlanta, May 1993, pp. 429–434 (IEEE Press, Piscataway, New Jersey).
4.
5.
KodaY.MaenoT.‘Grasping force control in master-slave system with partial slip sensor.’ In Proceedings of the IEEE/RSJ International Conference onIntelligent robots and systems, Vols 1-12, Beijing, China, October 2006, pp. 4641–4646 (IEEE Press, Piscataway, New Jersey).
6.
Dominguez-LopezJ. A.DamperR. I.CrowderR. M.HarrisC. J.‘Adaptive neurofuzzy control of a robotic gripper with on-line machine learning.’Robot. Auton. Syst.48 (2-3) (2004): 93–110
7.
TomovicR.StojiljkovicZ.‘Multifunctional terminal device with adaptive grasping force.’Automatica11 (6) (1975): 567–570
ShangZ. D.WangQ. Y.HanJ. H.XuX. H.‘Sliding sensor and soft grasping of electron hydraulic servo manipulator.’ In Proceedings of the IEEE International Conference onMechatronics and automation, Vols 1-3, Luoyang, China, June 2006, pp. 1459–1464 (IEEE Press, Piscataway, New Jersey).
10.
DubeyV. N.CrowderR. M.ChappellP. H.‘Optimal object grasp using tactile sensors and fuzzy logic.’Robotica17 (1999): 685–693
11.
MingrinoA.BucciA.MagniR.DarioP.‘Slippage control in hand prostheses by sensing grasping forces and sliding motion.’ In Proceedings of the Conference onIntelligent robots and systems: advanced robotic systems and the real world, Vols 1-3, Munich, Germany, September 1994, pp. 1803–1809 (IEEE Press).
12.
BirglenL.GosselinC. M.‘Fuzzy enhanced control of an underactuated finger using tactile and position sensors.’ In Proceedings of the IEEE International Conference onRobotics and automation, Vols 1-4, Barcelona, Spain, April 2005, pp. 2320–2325 (IEEE Press, Piscataway, New Jersey).
13.
EngebergE. D.MeekS. G.‘Adaptive object slip prevention for prosthetic hands through proportional-derivative shear force feedback.’ In Proceedings of the IEEE/RSJ International Conference onRobots and intelligent systems, Vols 1-3, Nice, France, September 2008, pp. 1940–1945 (IEEE Press, Piscataway, New Jersey).
14.
KyberdP. J.ChappellP. H.‘Object-slip detection during manipulation using a derived force vector.’Mechatronics2 (1) (1992): 1–13
15.
MaekawaH.TanieK.KomoriyaK.‘Dynamic grasping force control using tactile feedback for grasp of multifingered hand.’ In Proceedings of the IEEE International Conference onRobotics and automation, Vols 1-4, Minneapolis, April 1996, pp. 2462–2469 (IEEE Press, Piscataway, New Jersey).
16.
GlossasN. I.AspragathosN. A.‘Fuzzy logic grasp control using tactile sensors.’Mechatronics11 (7) (2001): 899–920
17.
BurnK.ShortM.BickerR.‘Adaptive and nonlinear fuzzy force control techniques applied to robots operating in uncertain environments.’J. Robot. Syst.20 (7) (2003): 391–400
18.
EdwardsC.SpurgeonS. K.Sliding mode control: Theory and applications (Taylor & Francis, London, UK1998)
19.
LacraruL. M.Bouazza-MaroufK.‘Friction compensation of an actively restrained clutch for path tracking.’Proc. IMechE Part I: J. Systems and Control Engineering220 (I5) (2006): 381-393 DOI: 10.1243/09596518JSCE186
20.
YoungK. D.UtkinV. I.OzgunerU.‘A control engineer's guide to sliding mode control.’IEEE Trans. Control Syst. Technol.7 (3) (1999): 328–342
21.
MaX. J.SunZ. Q.HeY. Y.‘Analysis and design of fuzzy controller and fuzzy observer.’IEEE Trans. Fuzzy Syst.6 (1) (1998): 41–51
22.
FengG.‘A survey on analysis and design of model-based fuzzy control systems.’IEEE Trans. Fuzzy Syst.14 (5) (2006): 676–697
23.
RossT. J.Fuzzy logic with engineering applications (Wiley, Chichester, UK2004)
24.
NguyenV. B.MorrisA. S.‘Using a genetic algorithm to fully optimise a fuzzy logic controller for a two-link-flexible robot arm.’Robotica27 (2009): 677–687
25.
Montazeri-GhM.SoleymaniM.‘Genetic optimization of a fuzzy active suspension system based on human sensitivity to the transmitted vibrations.’Proc. IMechE, Part D: J. Automobile Engineering222 (D10) (2008): 1769-1780 DOI: 10.1243/09544070JAUTO854
26.
de WitCanudas C.OlssonH.AstromK. J.LischinskyP.‘A new model for control of systems with friction.’IEEE Trans. Autom. Control40 (3) (1995): 419–425
27.
LeeH.UtkinV. I.‘Chattering suppression methods in sliding mode control systems.’Ann. Rev. Control31 (2) (2007): 179–188
