Optimization of feedback gains for a hydraulic servo system by genetic algorithms

Abstract

The optimal values of the five feedback gains of a double-loop controller for the speed control of an overcentred variable-displacement hydraulic motor are experimentally determined by using genetic algorithms. The reciprocal of the criterion of integration of time multiplied by absolute error is proposed as the fitness function that evaluates the performance of the control. The appropriate specification of the genetic algorithms and the search range of each control gain for the speed control system are presented. It is found that the near-optimal values of the feedback gains can be obtained within ten generations, which corresponds to about 100 experiments. The optimal gains are also obtained when the inertia or the supply pressure is varied. Optimized feedback gains are confirmed by plotting the fitness function in a given gain space. The fitness distribution indicates that finding the optimal feedback gains by manual tuning is an extremely time-consuming task, and that the genetic algorithm is an efficient scheme economizing time and labour, in optimizing feedback gains for hydraulic servo systems.

Keywords

genetic algorithm optimization feedback gain hydraulic servo system speed control cascade control double loop variable-displacement hydraulic motor

Get full access to this article

View all access options for this article.

References

Merrit

H. E.

Hydraulic Control Systems, 1976 (John Wiley, New York).

Watton

Fluid Power Systems, 1989 (Prentice-Hall, Englewood Cliffs, New Jersey).

Jeon

Y. S.

Applications of a fuzzy gain adapter to the three loop position control of a pneumatic servo system. PhD thesis, Korean Advanced Institute of Science and Technology, Seoul, 1997.

Goldberg

D. E.

Genetic Algorithms in Search, Optimization and Machine Learning, 1989 (Addison-Wesley, Reading, Massachusetts).

Ahn

C. C.

Optimization of control parameters for fluid power systems by genetic algorithms. MS thesis, Korean Advanced Institute of Science and Technology, Seoul, 1996.

Jeong

I. K.

A new hybrid genetic algorithm and its application to control. MS thesis, Korean Advanced Institute of Science and Technology, Seoul, 1994.

Mathias

K. E.

Whitley

Transforming the search space with gray coding. In Proceedings of the First IEEE International Conference on

Evolutionary Computation, 1994, pp. 513–518 (IEEE, New York).

Rudolf

Convergence analysis of canonical genetic algorithms. IEEE Trans. Neural Networks, 1994, 24 (1), 96–101.

Reeves

C. R.

Using genetic algorithms with small populations. In Proceedings of the Fifth International Conference on

Genetic Algorithms, 1993, pp. 92–99.

10.

Sutton

Boyden

Genetic algorithms: A general search procedure. Am. J. Phys., 1994, 62 (6), 549–552.

11.

Varŝek

Urbancic

Filipic

Genetic algorithms in controller design and tuning. IEEE Trans. Syst., Man Cybernetics, 1993, 23 (5), 1330–1339.

12.

Murrenhoff

Kupiek

H. P.

Elektrohydraulische Drehzahl und Lageregelung für Verstellmotoren am Konstant-Drucknetz. Ölhydraul. Pneum.-26, 1982, (12), 892–900.

13.

Murrenhoff

Shih

M. C.

Analyse Elektrohydraulischer Drehzahlregelungen für Verstellmotoren am Konstant-Drucknetz. Ölhydraul. Pneum.-26, 1982, (5), 333–339.

14.

Zeiger

Akers

Dynamic analysis of an axial piston pump swashplate control. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1986, 200 (C1), 49–58.

15.

Kim

C. S.

Dynamic analysis and control of an electrohydraulic speed servo system using variable displacement motor. PhD thesis, Korean Advanced Institute of Science and Technology, Seoul, 1996.

16.

Kim

C. S.

Lee

C. O.

Speed control of an overcentered variable displacement hydraulic motor with a load-torque observer. Control Engng Practice, 1996, 4 (11), 1563–1570.