The development of a new ball impact apparatus for the measurement of the traction behaviour of solidified lubricants is described. The normal and tangential forces between an oily plate and an obliquely impacting ball were measured directly on two different forms of apparatus by means of piezoelectric transducers. From the measured forces the coefficient of friction during impact could be calculated. For one particular oil, Santotrac 50, a full set of results is given and these are shown to be in good agreement with values reported previously by others using different forms of experimental equipment.
JacobsonB.An experimental determination of the solidification velocity for mineral oilsASLE Trans., 1974, 17, 290–294.
3.
AlsaadM.BairS.SanbornD. M.WinerW. O.Glass transitions in lubricants: Its relation to elastohydrodynamic lubrication (EHD)Trans. ASME, J. Lubric. Technol., 1978, 100, 404–417.
4.
TaborD.The role of surface and intermolecularforces in thin film lubrication In Microscopic Aspects of Adhesion and Lubrication, Tribology Series, Vol. 7 (Ed. GeorgesJ. M.), 1982, pp. 651–679 (Elsevier, Amsterdam).
5.
BairS.WinerW. O.Shear strength measurements of lubricants at high pressureTrans. ASME, J. Lubric. Technol., 1979, 101, 251–257.
6.
HöglundE.JacobsonB.Experimental investigation of the shear strength of lubricants subjected to high pressure and temperatureTrans. ASME, J. Tribology, 1986, 108, 571–578.
7.
JacobsonB.A high pressure-short time shear strength analyzer for lubricantsTrans. ASME, J. Tribology, 1985, 107, 220–223.
8.
HöglundE.Relationship between lubricant shear strength and chemical composition of the base oilWear, 1989, 130, 213–224.
9.
DowsonD.WangD.An analysis of the normal bouncing of a solid elastic ball on an oily plateWear, 1994, 179, 29–37.
10.
JohnsonK. L.Contact Mechanics, 1985 (Cambridge University Press, Cambridge).
11.
WorkelM. F.DowsonD.EhretP.TaylorC. M.The influence of mean contact pressure on the friction coefficient of a traction fluid at high pressureProc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 2000, 214 (C2), 309–312.
12.
BairS.WinerW. O.Shear strength measurements of lubricants at high pressureTrans. ASME, J. Lubric. Technol., 1979, 101, 251–257.
13.
EvansC. R.JohnsonK. L.The rheological properties of elastohydrodynamic lubricantsProc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1986, 200 (C4), 303–312.
14.
RameshK. T.On the rheology of a traction fluidTrans. ASME, J. Tribology, 1989, 111, 614–619.
15.
DowsonD.WorkelM. F.Canelo-QuinteroJ.MayS.Development of an apparatus for the direct measurement of traction coefficients for lubricants; preliminary measurements from a bouncing ball apparatus. InLubrication at the Frontier, Proceedings of the 25th Leeds-Lyon Symposium on Tribology (Eds DowsonD.), Lyon, September 1998, 1999, pp. 779–788 (Elsevier, Amsterdam).
16.
BairS.WinerW. O.Experimental investigation of the shear strength of lubricants subjected to high pressure and temperatureTrans. ASME, J. Tribology, 1990, 112, 744–748.
