Transient elastohydrodynamic analysis of elliptical contacts. Part 1: Isothermal and Newtonian lubricant solution

Abstract

Transient elastohydrodynamic lubrication of general elliptical point contacts was analysed in the present study based on multi-level techniques. Both entrainment directions along the major and minor axes of the contact ellipse were considered, together with transient load and speed impulses. In this study, only a Newtonian lubricant and isothermal conditions were assumed. The computing time required for a typical case took only approximately 2 h on a personal computer with a 2.8 GHz central processing unit. The predicted film thickness and the pressure were found to be mainly governed by the squeeze-film or separation actions. A sudden load increase resulted in an increase in the contact conjunction and a significant development of the squeeze-film action. Consequently the lubricant film thickness was increased initially around the inlet region and then moved along in the entraining direction towards the exit. A significant increase in the predicted central film thickness was observed, long after the load impulse had ceased. Such a process was found to be mainly governed by the time period of the impulse, and the time taken for the lubricant to move through the contact conjunction in the entraining direction. The speed impulse had similar effects. However, a sudden speed decrease was found to have negligible effect on the predicted film thickness, due to the powerful squeeze-film action.

Keywords

lubrication elastohydrodynamic impulse transient elliptical contact

Get full access to this article

View all access options for this article.

References

Jin

Z. M.

Dowson

Fisher

Fluid film lubrication in natural hip joints In Thin Films in Tribology, Tribology Series (Eds Dowson

Taylor

C. M.

Godet

), 1993, pp. 545–555 (Elsevier, Amsterdam).

Chang

A simple and accurate method to calculate transient EHL film thickness in machine components undergoing operation cycles

STLE Tribology Trans., 2000, 43 (1), 116–122.

Glovnea

R. P.

Spikes

H. A.

Behavior of EHD films during reversal of entrainment in cyclically accelerated/decelerated motion

STLE Tribology Trans., 2002, 45 (2), 177–184.

Dowson

Non-steady state effects in EHL. In Proceedings of an International Conference, NASA Conference Publication 2300, Lewis Research Center, National Aeronautics and Space Administration, 1984, 18-21 April 1983, Vol. II, pp. 579–592.

Lubrecht

A. A.

Ten Napel

W. E.

Bosma

Multigrid, an alternative methods for calculation film thickness and pressure profiles on elastohydrodynamically lubricated line contacts

Trans. ASME, J. Tribology, 1986, 108, 551–556.

Venner

C. H.

Ten Napel

W. E.

Bosma

Advanced multilevel solution of the EHL line contact problem, Trans. ASME, J. Tribology, 1990, 112, 426–431.

Hughes

TG.

Elcoate

C. D.

Evans

H. P.

Coupled solution of the elastohydrodynamic line contact problem using a differential deflection method

Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2000, 214 (C4), 585–598.

Venner

C. H.

Lubrecht

A. A.

Numerical simulation of a transverse ridge in a circular EHL contact under rolling/sliding

Trans. ASME, J. Tribology, 1994, 116, 751–761.

Holmes

M. J. A.

Evans

H. P.

Hughes

T. G.

Snidle

R. W.

Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method. Part 1: Theory and validation

Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2003, 217 (J4), 289–303.

10.

Holmes

M. J. A.

Evans

H. P.

Hughes

T. G.

Snidle

R. W.

Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method. Part 2: Results

Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2003, 217 (J4), 305–321.

11.

Wijnant

Contact dynamics in the field of elastohydrodynamic lubrication. PhD thesis, Twente University, Enschede, The Netherlands, 1998.

12.

Zhao

Sadeghi

Analysis of EHL circular contact shut down

Trans. ASME, J. Tribology, 2003, 125, 76–90.

13.

Markho

P. H.

Highly accurate formulas for rapid calculation of the key geometrical parameters of elliptic Hertzian contacts

Trans. ASME, J. Tribology, 1987, 109, 640–647.

14.

Roelands

C. J. A.

Correlation aspects of viscosity-temperature-pressure relationship of lubricating oils. PhD thesis, Delft University of Technology, Delft, The Netherlands, 1966.

15.

Dowson

Higginson

G. R.

Elastohydrodynamic Lubrication, 1966 (Pergamon, Oxford).

16.

Venner

C. H.

Multilevel solution of the EHL line and point contact problems. PhD thesis, Twente University, Enschede, The Netherlands, 1991.

17.

Brandt

Lubrecht

A. A.

Multilevel matrix multiplication and fast solution of integral equations

J. Comput. Phys., 1990, 90, 348–370.

18.

Chittenden

R. J.

Dowson

Dunn

J. F.

Taylor

C. M.

A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts. I: Direction of lubrication entrainment coincident with the major axis of the Hertzian contact ellipse

Proc. R. Soc. Lond. A, 1985, 397, 245–269.

19.

Cameron

Principles of Lubrication, 1966 (Longman, London).

20.

Hamrock

B. J.

Dowson

Isothermal elastohydrodynamic lubrication of point contacts. Part 3: Fully flooded results

Trans. ASME, J. Lubric. Technol., 1977, 99, 264–276.