This work investigates the stability of a journal bearing system, including the effects of inlet viscosity. Simplified thermohydrodynamic design charts for the rapid prediction of stiffness coefficients, damping coefficients, and threshold speed have been developed. This investigation reveals that the inlet viscosity has a pronounced influence on the bearing dynamic coefficients of the lubricating oil film. This investigation also reveals that it is possible to stabilize a journal bearing either by heating the oil or by cooling the oil depending on the operating region.
NewkirkB. L.LewisJ. F.Shaft whipping due to oil action in journal bearingsGen. Electric Rev., 1925, 28, 559–568.
2.
PinkusO.Experimental investigation of resonant whipTrans. ASME, 1956, 78, 975–983.
3.
NewkirkB. L.LewisJ. F.Oil film whirl-an investigation of disturbances due to oil films in journal bearingTrans. ASME, 1956, 78, 21–27.
4.
MakiE. R.EzzatH. A.Thermally induced whirl of a rigid rotor on hydrodynamic journal bearingsTrans. ASME, 1980, 102 (1), 8–14.
5.
CraigheadI. A.DowsonD.SharpR. S.TaylorC. M.The influence of thermal effects and shaft misalignment on the dynamic behavior of fluid film bearings. Proc. of 6th Leeds-Lyons Symposium on Tribology, September 1979, 47–55.
6.
KhonsariM. M.A review of thermal effects in hydro-dynamic bearings, Part II: Journal bearingsASLE Trans., 1987, 30, 26–33.
7.
ShellyP.EttlesC.A tractable solution for medium-length journal bearingsWear, 1970, 16, 221–228.
8.
KnightJ. D.BarrettL. E.An approximate solution technique for multilobe journal bearings including thermal effects, with comparison to experimentsASLE Trans., 26 (4), 501–508.
9.
KhonsariM. M.JangJ. Y.FillonM.On the generalization of thermohydrodynamic analyses for journal bearingsJ. Tribol., 1996, 118, 571–579.
10.
KhonsariM. M.BooserE. R.Applied Tribology Bearing Design and Lubrication, 2001 (John Wiley and Sons, New York).
11.
KhonsariM.ChangY.Stability boundary of nonlinear orbits within clearance circle of journal bearingsASME J. Vib. Acoust., 1993, 115, 303–307.
12.
JangJ. Y.KhonsariM. M.Design of bearings on the basis of thermohydrodynamic analysisProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2004, 218, 355–363.
