A numerical solution for the micro-elastohydrodynamic lubrication (EHL) problem of two coated elastic bodies in line contact is presented. This incorporates non-Newtonian behaviour of the lubricant, using an Eyring-type non-linear viscous model. The surface elastic deformations are computed from full elasticity analysis of layered elastic half-spaces. The coupled differential deflection method is used in the numerical solution of the micro-EHL mathematical model. Results are presented for smooth surface, steady-state problems that compare the influence of coating elastic modulus and coating thickness on calculated lubricant pressure and film thickness distributions. Some transient results are also included, where the effect of coatings on a single ridge feature and on a rough surface in rolling/sliding contact is examined.
AlanouM. P.EvansH. P.SnidleR. W.Effect of different surface treatments and coatings on the scuffing performance of hardened steel disks at very high sliding speedsTribol. Int., 2004, 37, 93–102.
2.
GuptaP. K.WalowitJ. A.Contact stresses between an elastic cylinder and a layered elastic solidASMEJ. Lubr. Technol., 1974, 96, 250–257.
3.
KingR. B.O'SullivanT. C.Sliding stresses in a two-dimensional layered elastic half-spaceInt. J. Solids Struct., 1987, 23 (5), 581–597.
4.
ElsharkawyA. A.HamrockB. J.A numerical solution for dry sliding line contact of multilayered elastic solidsTrans ASME J. Tribol., 1993, 115 (2), 237–245.
5.
MaoK.BellT.SunY.Effect of sliding friction on contact stresses for multilayered elastic bodies with rough surfacesTrans ASMEJ. Tribol., 1997, 119, 476–480.
6.
IharaT.ShawM. G.BhushanB. A.Finite element analysis of contact stress and strain in an elastic film on a rigid substrate-part I: Zero frictionTrans ASMEJ. Tribol., 1986, 108 (4), 527–533.
7.
KomvopoulosK.Finite element analysis of a layered elastic solid in normal contact with a rigid substrateTrans ASMEJ. Tribol., 1988, 110 (3), 477–597.
8.
TianH.SakaN.Finite element analysis of an elastic-plastic two-layer half space: Sliding contactWear, 1991, 148, 262–285.
9.
AndersonI. A.CollinsI. F.Plane strain stress distributions in discrete and blended coated solids under normal and sliding contactWear, 1995, 185, 23–33.
10.
OvaertT. C.PanJ.Optimal design of layered structures under normal (frictionless) contact loadingTrans ASMEJ. Tribol., 2002, 124, 438–442.
11.
HookeC. J.The elastohydrodynamic lubrication of a cylinder on an elastic layerWear, 1986, 111 (1), 83–99.
12.
ElsharkawyA. A.HamrockB. J.Elastohydrodynamic Lubrication of elastomeric-coated surfaces in line contactProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1995, 209, 119–130.
13.
GoryachevaI.SadeghiF.XuC.Viscoelastic effects in lubricated contactsWear, 1996, 198, 307–312.
14.
JaffarM. J.On the microelastohydrodynamic lubrication of an elastomeric bonded layerTribol. Int., 2002, 35, 193–200.
15.
GogliaP. R.CusanoC.ConryT. F.The effects of surface irregularities on the elastohydrodynamic lubrication of sliding line contacts, Part I-single irregularities; Part II-wavy surfacesTrans. ASME J. Tribol., 1984, 106, 104–119.
16.
LubrechtA. A.Ten NapelW. E.BosmaR.The influence of longitudinal and transverse roughness on the elastohydrodynamic lubrication of circular contactsTrans. ASME J. Tribol., 1988, 110, 421–426.
17.
KwehC. C.EvansH. P.SnidleR. W.Microelastohydrodynamic lubrication of an elliptical contact with transverse and three dimensional sinusoidal roughnessTrans. ASME J. Tribol., 1989, 111, 577–584.
18.
ElsharkawyA. A.HamrockB. J.Subsurface stresses in micro-EHL line contactsTrans. ASME J. Tribol., 1991, 113, 645–655.
19.
ChangL.WebsterM. N.JacksonA.On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfacesTrans. ASME J. Tribol., 1993, 115, 439–444.
20.
VennerC. H.LubrechtA. A.Transient analysis of surface features in an EHL line contact in the case of slidingTrans. ASME J. Tribol., 1994, 116, 186–193.
21.
HookeC. J.The effect of roughness in EHL contacts.Proceedings of 31st Leeds-Lyon Symposium on Tribology, 2005, pp. 31–46 (Elsevier, Amsterdam).
22.
SadeghiF.A comparison of the fluid model's effect on the internal stresses of rough surfacesTrans. ASME J. Tribol., 1991, 113, 142–149.
23.
KwehC. C.PatchingM. J.EvansH. P.SnidleR. W.Simulation of elastohydrodynamic contacts between rough surfacesTrans. ASME J. Tribol., 1992, 114, 412–419.
24.
VennerC. H.Ten NapelW. E.Surface roughness effects in an EHL line contactTrans. ASME J. Tribol., 1992, 114, 186–191.
25.
AiX.ChengH. S.Transient EHL analysis for line contacts with measured surface roughness using multigrid techniqueTrans ASME J. Tribol., 1994, 116, 549–558.
26.
ElcoateC. D.EvansH. P.HughesT. G.SnidleR. W.Thin film, time dependent, micro-EHL solutions with real surface roughness.Proceedings of 25th Leeds-Lyon Symposium on Tribology, 1999, pp. 163–174, Elsevier, Amsterdam.
27.
EvansH. P.SnidleR. W.A model for elastohydrodynamic film failure in contacts between rough surfaces having transverse finishTrans. ASME J. Tribol., 1996, 118 (4), 847–857.
28.
JohnsonK. L.TevaarwarkJ. L.Shear behavior of elastohydro-dynamic oil filmsProc. R. Soc. Lond. A, 1977, 356 (12), 215–236.
29.
HughesT. G.ElcoateC. D.EvansH. P.Coupled solution of the elastohydrodynamic line contact problem using a differential deflection methodProc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2000, 214, 585–598.
30.
ElcoateC. D.EvansH. P.HughesT. G.SnidleR. W.Transient elastohydrodynamic analysis of rough surfaces using a novel coupled differential deflection methodProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2001, 215, 319–337.
EvansH. P.HughesT. G.Evaluation of deflection in semi-infinite bodies by a differential methodProc. Instn Mech. Engrs. Part C: J. Mechanical Engineering Science, 2000, 214, 563–584.
33.
EvansC. R.JohnsonK. L.The rheological properties of elastohydrodynamic lubricantsProc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1986, 200, 303–312.
34.
HoupertL.HamrockB. J.Elastohydrodynamic lubrication calculations as a tool to study scuffing. Proceedings of the 12th Leeds-Lyon Symposium on Tribology, 1985, pp. 146–155 (Mechanical Engineering Publications, Bury St. Edmunds, Suffolk, England).
35.
ConryT. F.WangS.CusanoCA Reynolds-Eyring equation for elastohydrodynamic lubrication in line contacts. Trans. ASME J. Tribol., 1987, 109, 648–658.
36.
AiX.ZengL.A general model for microelastohydrodynamic lubrication and its full numerical solutionTrans. ASME J. Tribol., 1989, 111, 569–576.
37.
JacodB.LugtP. M.DumontM. L.TrippJ. H.VennerC. H.Amplitude reduction of waviness in elastohydrodynamic lubrication using an eyring fluid modelProc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 343–350.
38.
TaoG.HughesT. G.EvansH. P.SnidleR. W.HopkinsonN. A.TalksM.StarbuckJ. M.Elastohydrodynamic lubrication analysis of gear tooth surfaces from micropitting tests TransASME J. Tribol., 2003, 125, 267–274.
39.
VennerC. H.LubrechtA. A.Numerical simulation of a transverse ridge in a circular EHL contact under rolling/slidingTrans. ASME J. Tribol., 1994, 116, 751–761.
40.
HolmesM. J. A.QiaoH.EvansH. P.SnidleR. W.Surface contact and damage in micro-EHL.Proceedings of 31st Leeds-Lyon Symposium on Tribology, 2005, pp. 605–616 (Elsevier, Amsterdam).
41.
YoshidaA.FujiiM.Influence of soft surface modification on rolling contact fatigue strength of machine elementsTribol. Int., 2002, 35, 837–847.
