Strain wave gearing (SWG), also known as harmonic drive gear, has been used in many space applications. In 2003, a development of grease-lubricated-type SWG for space flight applications was begun. The life tests of the SWG exposed to vibration test and thermal vacuum test were performed in vacuum. The life test results showed that the in-vacuum operating life of the SWG was significantly short compared with the in-atmosphere life, which is normally corresponding to a rolling fatigue life of wave generator bearing. This may be mainly caused by the severe wear at the wave generator—flexspline interface, where the lubricant is not supplied easily into the clearance in vacuum.
MiyabaH.ObaraS.SuzukiM.Development of moving mechanical components for space-use (in Japanese). In Proceedings of the 50th Space Sciences and Technology Conference, Fukuoka, Japan, 2006, pp. 974–979.
2.
ManiwaK.Study on lubrication mechanisms of strain wave gearing for space applications. PhD Thesis, Tokyo Metropolitan Institute of Technology, 2006 (in Japanese).
3.
ManiwaK.ObaraS.Lubrication mechanism between wave generator and flexspline in strain wave gearing under in-vacuum and in-air environments (measurement of contact electric resistance between mechanical elements). J. Jpn. Soc. Tribol., 2007, 52(1), 40–50 (in Japanese).
4.
ManiwaK.ObaraS.Mixed lubrication analysis between wave generator and flexspline in strain wave gearing (numerical analysis under load-torque applying operation) (in Japanese). J. Jpn. Soc. Tribol., 2007, 52(1), 51–61.
5.
GreenwoodJ. A.WilliamsonJ. B. P.Contact of nominally flat surfaces. Proc. R. Soc. Ser. A, 1966, 295, 300–319.
6.
PatirN.ChengH. S.An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication. Trans. ASME J. Lubr. Technol., 1978, 100, 12–17.
