Biaxial testing of fibre-reinforced composite laminates

Advanced composite material systems are increasingly used in almost every industrial branch. The structural components manufactured from these composite material systems are usually subjected to complex loading that leads to multi-axial stress and strain fields at critical surface locations. The current practice of using solely uniaxial test data to validate proposed material models is wholly inadequate. In order to test closer to reality, a biaxial test bench using four servo-hydraulic actuators with four load cells was developed. Besides the development of the test facility, a mixed numerical/experimental method was developed to determine the in-plane stiffness parameters from testing a single cruciform test specimen. To obtain the strength data an optimized geometry for the cruciform type specimen was designed. For the optimization procedure a full three-dimensional finite element model was used. The numerical results were validated with strain gauge, digital image correlation, and electronic speckle pattern interferometry data. The material system used for the experimental validation was glass fibre-reinforced epoxy with a lay-up [(+45°−45° 0°)₄(+45°−45°)] typically used for wind turbine blades.