Abstract
A specially programmed marker load sequence was designed that permits unambiguous measurement of crack opening and crack closure stress from marker band spacing using both optical and scanning electron fractography. Crack growth tests using programmed marker loading sequence were carried out on single edge notch tension specimens made out of Al-Cu alloy 2014-T3 (BS: L73 equivalent) from crack initiation to failure and the fracture surface examined under optical and electron microscope. Reproducible marker band patterns on the fatigue fracture surface could be obtained using this method. Measured crack closure/opening stress values are observed to be consistent with known material behaviour. The marker banding technique can be applied over wider crack growth rate ranges compared to striation measurement technique, which is restricted to a small range of crack growth rate and in select materials. Quantitative fractography of the marker bands reveals a degree of load interaction under variable amplitude loading that requires further examination.
Get full access to this article
View all access options for this article.