Semi-volatile in internal combustion engine lubricating oil may be responsible for limiting service life and can lead to in-cylinder deposit formation. In order to measure semivolatile content, a new thermogravimetric analysis (TGA) procedure has been adapted from existing soot procedures to determine the levels of semi-volatile compounds in progressively aged lubricating oil samples from a natural gas engine dynamometer test cell run. The per cent weight remaining at 550 °C, while heated at a constant rate in an inert atmosphere, varied linearly with running time, viscosity, and oxidation and nitration. The method yielded reproducible run-to-run results and showed good agreement between helium and argon atmospheres. Mass spectroscopy data confirmed increased levels of high molecular weight species during engine operation. This method may be applicable to diesel engine oil samples.
BellJ.Engine lubricants In Engine tribology, 1993, pp. 287–301 (Elsevier Science Publishers B.V., Amsterdam).
2.
TruhanJ.MoreK.RangarajanR.The erosion-corrosion of intake valve sealing surfaces due to the formation of lubricating oil deposits In World Tribology Congress III, Washington, DC, September 2005, paper WTC2005-64227.
3.
Standard test method for kinematic viscosity of transparent and opaque liquids (and the calculation of dynamic viscosity), 2004, ASTM D445-04e2 (ASTM International, West Conshohocken, Pennsylvania).
4.
Standard test method for acid number of petroleum products by potentiometric titration, 2004, ASTM D664-04e1 (ASTM International, West Conshohocken, Pennsylvania).
5.
Standard test method for base number determination by potentiometric titration, 2002, ASTM D4739-02 (ASTM International, West Conshohocken, Pennsylvania).
6.
Standard test method for evaluation of diesel engine oils in T-8 diesel engine, 2005, D5967-05 (ASTM International, West Conshohocken, Pennsylvania).
7.
Standard practice for condition monitoring of used lubricants by trend analysis using Fourier transform infrared (FT-IR) spectrometry, 2004, ASTM E2412-04 (ASTM International, West Conshohocken, Pennsylvania).
8.
Standard test method for determination of additive elements, wear metals, and contaminants in used lubricating oils and determination of selected elements in base oils by inductively coupled plasma atomic emission spectrometry (ICP-AES), 2005, ASTM D5185-05 (ASTM International, West Conshohocken, Pennsylvania).
9.
GustavsonB.Volatility determination of oils by TGThermochimica Acta1991, 175, 73–77.
10.
IsaF.Haji-SulaimanM.An investigation of the relationship between used engine oil properties and simulated intake valve depositsProc. Instn Mech. Engrs1997, 211, 379–389.
11.
ShurvallH.ClagueA.SouthbyM.Method for the determination of the composition of diesel engine deposits by infrared spectroscopyAppl. Spectroscopy1997, 51, 827–835.
12.
SmithG.HopwoodA.TitchenerJ.Micro-characterization of heavy-duty diesel engine piston depositsSurface and Interface Analysis2002, 33, 259–268.
13.
LideD.Handbook of chemistry and physics, 73rd edition, 1992, pp. 4–136 and 4-137 (CRC Press).
14.
SchaubT.HendricksonC.QuinnJ.RodgersR.MarshallA.Instrumentation and method for ultrahigh resolution field desorption ionization Fourier transform ion cyclotron resonance mass spectrometry of nonpolar speciesAnalytical Chemistry2005, 77 (5), 1317–1324.
15.
HugheyC.RodgersR.MarshallA.QianK.RobbinsW.Identification of acidic NSO compounds in crude oils of different geochemical origins by negative ion electrospray Fourier transform ion cyclotron resonance mass spectroscopyOrganic Geochemistry2002, 33, 743–759.
16.
HugheyC.HendricksonC.RodgersR.MarshallA.Elemental composition analysis of processed and unprocessed diesel fuel by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometryEnergy and Fuels2001, 15 (5), 1186–1193.
17.
PurcellJ.RodgersR.HendricksonC.QuinnJ.MarshallA.Atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance mass spectrometry for analysis of non-polar hydrocarbons In Proceedings of the 52nd ASMS Conference on Mass spectrometry and allied topics, Nashville, Tennessee, 2004.
18.
HugheyC.HendricksonC.RodgersR.MarshallA.Kendrick mass defect spectrum: A compact visual analysis for ultrahigh-resolution broadband mass spectraAnalytical Chemistry2001, 73 (19), 4676–4681.
19.
RogersR.SchaubT.MarshallA.Petroleomics: MS returns to its rootsAnalytical Chemistry2005, 77 (1), 21A–27A.
20.
WhiteC.Prediction of the boiling point, heat of vaporization, and vapor pressure at various temperatures for polycyclic aromatic hydrocarbonsJ. Chem. Engng Data1996, 31 (2), 198–203.
21.
SanderL. C.WiseS. A.NIST Special Publication SP-922, 1997, p. 16 (National Institute of Standards and Technology, Maryland).
