Modelling the Torsional Interaction of Wire and Polyester Fibre Ropes Used for Offshore Moorings

Abstract

Oil rig mooring lines have traditionally consisted of chain and wire rope. As production has moved into deeper water it has proved advantageous to incorporate sections of fibre rope into the mooring lines. However, this has highlighted torsional interaction problems that can occur when ropes of different types are joined together.

This paper describes a method by which the torsional properties of ropes can be modelled and can then be used to calculate the rotation and torque for two ropes connected in series. The method uses numerical representations of the torsional characteristics of both the ropes, and equates the torque generated in each rope under load to determine the rotation at the connection point. Data from rope torsional characterization tests have been analysed to derive constants used in the numerical model. Constants are presented for: a six-strand wire rope; a torque-balanced fibre rope; and a fibre rope that has been designed to be torque-matched to stranded wire rope. The calculation method has been verified by comparing predicted rotations with measured test values. Worked examples are given for a six-strand wire rope connected, firstly, to a torque-balanced fibre rope that offers little rotational restraint, and, secondly, to a fibre rope whose torsional properties are matched to that of the wire rope.

Keywords

offshore moorings torsion wire rope fibre rope

Get full access to this article

View all access options for this article.

References

Chaplin

C R

Del Vecchio

C J M

Appraisal of lightweight moorings for deep water. In Proceedings of the 24th Offshore Technology Conference, Houston, Texas, 1992, OTC 6965, pp. 189–198.

Chaplin

C R

Torsional failure of a wire rope mooring line during installation in deep water

J. Engng Failure Analysis, 1998, 6, 67–82.

Chaplin

C R

Rebel

Ridge

I M L

Tension/torsion interactions in multicomponent mooring lines. In Proceedings of the 32nd Offshore Technology Conference, Houston, Texas, 2000, OTC 12173.

Feyrer

Schiffner

Torque and torsional stiffness of wire rope - Part 1

Wire, 1986, 36 (8), 318–320.

Feyrer

Schiffner

Torque and torsional stiffness of wire rope - Part 2

Wire, 1987, 37 (1), 23–27.

Kollros

Der Zusammenhang zwischen Torsions-moment, Zugkraft und Verdrillung in Seilen

Int. Berg- und Seilbahn-Rundschau (ISR), 1974, 18 (2), 49–58, and Draht, 1975, 26 (10), 475–480.

Voigt

P.-G.

Quality of steel wire ropes. OIPEEC Technical Meeting on

Experiences with Ropes, Lenzburg, Switzerland, September 2003, pp. 23–35.

Raoof

Hobbs

R E

Torsional stiffness and hysteresis in spiral strands

Proc. ICE, 1989, Part 2, 87, 501–515.

Kraincanic

Hobbs

R E

Axial stiffness and torsional effects in a 76 mm wire rope: Experimental data and theoretical predictions

J. Strain Analysis, 1999, 34 (1), 39–51.

10.

Rebel

The torsional behaviour of triangular strand ropes for drum winders. In Proceedings of OIPEEC Round Table Conference on

The Application of Endurance Prediction for Wire Ropes, The University of Reading, 1997, UK, pp. 135–159.