Nanoindentation and scanning probe microscopy techniques applied to deforming thin films, nanospheres, nanowires, and nanocrystalline structures have uncovered new mechanical property phenomena dependent on size scale. This overview addresses several segments — those associated with measurement by nanoindentation, as well as the resulting properties of elasticity and plasticity, and fracture toughness of semi-brittle crystals. Specific to volumes in indentation or compression, it is shown that both pressure and scale effects can become dominant for both elasticity and plasticity at sizes less than 100nm. A strong inverse relationship between yield strength and activation volume for both single crystal and nanocrystalline structures is reviewed. Equally strong is a relationship between fracture toughness, the number of shielding dislocations accommodating indentation prior to fracture, and the basic mechanical and physical properties of semi-brittle solids. The link between fracture toughness and plasticity in these semi-brittle materials is shown to be the activation volume for dislocation nucleation in these strong solids.
PoirierJ.-P.‘Murnaghan's integrated linear equation of state In’Introduction to the physics of the Earth's interior (Cambridge, UK: Cambridge University Press2000): pp 64–66
2.
WolfB.GökenM‘On the pressure dependence of the indentation modulus’Z. MetaIlkd96 (2005): 1247–51
3.
VolinskyA. AEdwardsN. VVellaJ. BGerberichW. WOzkanC. SFreundL. BCammarataR. CGaoH Ed. ‘Electroplated Cu film residual stresses and mechanical properties. In MRS Symposium Proceedings, Symposium L’Thin films – stresses and mechanical properties IX (Pennsylvania, USA: Materials Research Society Autumn) 2001.
4.
SwadenerJ. GTaljatBPharrG. M‘Measurement of residual stress by load and depth sensing indentation with spherical indenters’J. Mater. Res.16 (2001): 2091–2102
5.
TsuiT. YOliverW. CPharrG. M‘Influences of stress on the measurement of mechanical properties using nanoindentation; Part I: Experimental studies in an aluminum alloy’J. Mater. Res.11 (1996): 752–9
6.
BolshakovA.OliverW. C.PharrG. M.‘Influences of stress on the measurement of mechanical properties using nanoindentation; Part II: Finite element simulations’J. Mater. Res.11 (1996): 760–8
7.
OliverW. CPharrG. M‘Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology’J. Mater. Res.19 (2004): 3–20
8.
Van LandinghamM. RJulianoT. FHagonM. J‘Measuring tip shape for instrumented indentation using atomic force microscopy’Meas. Sci. Technol.16 (2005): 2173–2185
9.
MaL.LevineE.‘Effect of the spherical indenter tip assumption on nanoindentation’J. Mater. Res.22 (2007): 1656–1661
10.
StaufferD. D.GerberichW. W., Unpublished work, 2008.
11.
VillarubiaJ. S‘Scanned probe microscope tip characterization without calibrated tip characterizers’J. Vac. Sci. Technol. B.14 (2) (1996): 1518–1521
12.
GaneN.‘The direct measurement of the strength of metals on a sub-micrometer scale’Proc. Roy. Soc. Lond., A317 (1970): 367–391
13.
PethicaJ. BTaborD‘Contact of characterized metal surfaces at very low loads: deformation and adhesion’Surf. Sci.89 (1979): 182–90
14.
KogutL.KomvopoulosK‘Electrical contact resistance theory for conductive rough surfaces’J. Appl. Phys.94 (5) (2003): 3153–3162
GreenwoodJ. ATrippJ. H‘The elastic contact of rough spheres’Trans. ASME, Series E, J. App. Mech.34 (1967): 153–159
17.
CordillM. JStaufferD. DGerberichW. W‘Time-dependent, nanoscale contact plasticity.’ In Proceedings of Mechanics of time dependent materials: 6th International Conference, 30 March–4 April 2008, Monterey, California, USA (Mechanics of Time Dependent Materials Conference/Curran Associates, Inc., New York, USA)
18.
CordillM. JMoodyN. RGerberichW. W‘Effects of dynamic indentation on the mechanical response of materials’J. Mater. Res.23 (2008): 1604–1613
VolkertC. ALilleoddenE. T‘Size effects in the deformation of sub-micron Au columns’Philos. Mag.86 (2006): 5567–5579
21.
SchuhC. ALundA. C‘Application of nucleation theory to the rate dependence of incipient plasticity during nanoindentation’J. Mater. Res.19 (2004): 2152–2158
22.
SchuhC. AMasonJ. KLundA. C‘Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments’Nature Materials4 (2005): 617
23.
GaillardY.TromasCWeirgardJ‘Quantitative analysis of dislocation pile-ups moderated during nanoindenation in M. O’Acta Materialia54 (2006): 1409
24.
GerberichW. WVenkataramanS. KHuangHHarveyS. EKohlstedtD. L‘The injection of plasticity by millinewton contacts’Acta Metallurgica at Materialia43 (1995): 1569–1576
25.
CorcoranS. GColtonR. JLilleoddenE. TGerberichW. W‘Anomalous plastic deformation at surfaces: Nanoindentation of gold single crystals’Phys. Rev. B55 (1997): 16057–16060
26.
KramerD. EYoderK. BGerberichW. W‘Surface constrained plasticity: oxide rupture and the yield point process’Philos. Mag. A81 (2001): 2033–2058
27.
CordillM. JMoodyN. RGerberichW. W‘The role of dislocation walls for nanoindentation to shallow depths’Inter. J. Plasticity25 (2009): 281–301
28.
NadgornyE. MDimidukD. MUchicM. DLilleoddenEBesserPLevineLNeedlemanA Ed. ‘Size effects in LiF micron-scale single crystals of low dislocation density.’ In MRS Symposium Proceedings Symposium EE, Volume 976 (Eds E. Lilleodden, P. Besser, L. Levine, A. Needleman), Autumn 2007, Size Effects in the Deformation of Materials – Experiments and Modeling (Materials Research Society, Pennsylvania, USA), Paper no. 0976-EE06–24.
AubryS.OrtizM‘The mechanics of deformation-induced subgrain-dislocation structures in metallic crystals at large strains’Proc. Roy. Soc. Lon., Series A – Math. Phys. Eng. Sci.459 (2040) (2003): 3131–3158
DickinsonJ. TParkN.-SKimM.-WLangfordS. C‘A scanning force microscope study of a tribochemical system: stress-enhanced dissolution’Tribology Letters3 (1997): 69–80
37.
VehoffA.LemaireDSchuelerKWaschklesTYangB‘The effect of grain size on strain rate sensitivity and activation volume – from nano to ultrafine-grained nickel’Int. J. Mat. Res.04 (2007): 259–268
38.
ChristianJ. WTransformations in Metals and Alloys, Part I (Oxford: Pergamon Press1975): 279.
39.
LuGKioussisNBulatovV. V.‘Dislocation core properties of aluminum: a first-principles study’Mater. Sci. Eng. A308–310 (2001): 142–147
40.
OhmuraT.MatsuokaSTanakaKYoshidaT‘Nanoindentation load-displacement behavior of pure face centered cubic metal thin films on a hard substrate’Thin Solid Films385 (2001): 198–204
41.
LinI. HHirthJ. P‘On the brittle crack advance by double-kink nucleation’J. Mat'ls. Sci.17 (1982): 447–460
42.
RabierJ.‘High-stress plasticity and the core structures of dislocations in silicon’Physica Status Solidi204 (2007): 2248–2255
43.
GodetJ.PizzagalliLBrochardSBeauchampP‘Theoretical study of dislocation nucleation from simple surface defects in semiconductors’Phys. Rev. B.70 (5) (2004): 054109/1–054109/8.
44.
HatanoT.‘Dislocation nucleation in shocked fcc solids: Effects of temperature and pre-existing voids’Phys. Rev. Lett.93 (8) (2004): 085501/1–085501/4.
45.
ZhangT.-Y.‘Emission of a half-rectangular dislocation loop from a mode I crack tip’Physica Status Solidi (b)198 (2006): 587–597
46.
VolinskyA. AMoodyN. RGerberichW. W‘Interfacial toughness measurements for thin films on substrates’Acta Mater.50 (2002): 441–466
47.
ZhangS.SunDFuYDuH‘Toughness measurements of thin films: A critical review’Surface and Coatings Technology198 (2005): 74–84
48.
CordillM. JBahrD. FMoodyN. RGerberichW. W‘Recent developments in thin film adhesion measurement’IEEE Trans. Device and Mat'l Reliability4 (2004): 163–168
49.
HemkerK. JSharpeW. WJr‘Microscale characterization of mechanical properties’Review of Materials Research37 (2007): 93–126
50.
LiJ. C. M.‘Computer simulation of dislocations emitted from a crack tip’Scripta Metall.20 (1986): 1477–1482
51.
HuangH.GerberichW. W.‘Crack-tip dislocation arrangements for equilibrium-II. Comparisons to analytical and computer simulation models’Acta Metal. Mater.40 (1992): 2873–2881
52.
KatzY.KellerR. R.HuangH.GerberichW. W.‘A dislocation shielding model for the fracture of semibrittle polycrystals’Metall. Trans. A 24A (1993): 343–350
53.
EshelbyJ. DFrankF. C.NabarroF. R. N.‘The equilibrium of linear arrays of dislocations’Phil. Mag.42 (15) (1951): 351
54.
HutchinsonJ.SuoZ‘Mixed-mode cracking in layered materials’Adv. Appl. Mech.29 (1992): 63–191
55.
DesaiA. VHaqueM. A‘Mechanical properties of ZnO nanowires’Sensors and Actuators A: Physical134 (2007): 169–176
56.
LucasM.MaiW. J.YangR. S.WangZ. L.RiedoE‘Size dependence of the mechanical properties of ZnO nanobelts’Phil. Mag.87 (2007): 2135–41
GouldstoneAChollacoopNDaoMLiJMinorAShenY.-L‘Indentation across size scales and disciplines: Recent developments in experimentation and modeling’Acta Mater.55 (2007): 4015–4039
62.
GerberichW. WMookW. MCarterC. BBallariniR‘A crack extension force correlation for hard materials’Int. J. Fracture148 (2007): 109–114
63.
TanakaM.HigashidaK‘HVEM characterization of crack tip dislocations in silicon crystals’J. Electron Micros.53 (2004): 353–360
64.
GerberichW. WMookW. MCordillM. JCarterC. BPerreyC. R.HeberleinJ.V. R.GirshickS. L.‘Reverse plasticity in single crystal nanospheres’Int. J. Plasticity21 (2005): 2391–2405
