A laser-Doppler technique is successfully applied to measure the flow field inside a closed, backswept impeller, through a rotating window. Results show that, in contrast to the flow in many radial-exit impellers, the flow in the backswept impeller is stable and attached. Further, comparison with an open impeller demonstrates the fundamental difference in the flow fields near the shroud.
DurraniT. S.GreatedC.Laser systems in flow measurements1976 (Plenum Pub.).
3.
DurstF.MellingA.WhitelawJ. H.Principles and practice of laser Doppler anemometry1976 (Academic Press).
4.
WislerD. C.MosseyP. W.‘Gas velocity measurements within a compressor rotor passage using the laser Doppler velocimeter’, J. Engng. Power, Trans. ASME, Series A197395.
5.
JonesW. B.‘Laser fluid velocity sensor’, Paper No. 2-8-22 Symposium on flows 1971 (Pittsburgh, PA).
6.
WislerD. C.‘Shock wave and flow velocity measurements in high speed fan rotor using the laser velocimeter’, J. Engng. Power, Trans. ASME, Series A197799.
7.
SchoolR.‘Laser dual beam method for flow measurements in turbomachines’, ASME Paper No. 74-GT-157.
8.
EckardtD.‘Detailed flow investigation within a high speed centrifugal compressor impeller’, J. Fluid Engng, Trans. ASME, Series I197698.
9.
AbbissJ. B.‘Photon correlation velocimetry in aerodynamics’, Nato Advanced Study Institute seminar on photon correlation spectroscopy and velocimetry1976 (Capri).
10.
WalkerD. A.WilliamsM. C.HouseR. D.‘Intrablade velocity measurements in a transonic fan utilizing a laser Doppler velocimeter’, Minnesota symposium on laser anemometry1975.
11.
AtkeyR. C.Computer-aided design of radial and mixed flow compressors Ph D Thesis, University of Bath, 1975.
12.
WallitL.HarpJ. L.LiuC. Y.‘Numerical calculation of the internal flow field in a centrifugal compressor impeller’, NASA CR-134984 1975.
13.
MooreJ.‘A wake and an eddy in a rotating radial flow passage’, J. Engng. Power, Trans. ASME, Series A197397.
14.
PampreenR. C.‘Small turbomachinery compressor and fan aerodynamics’, J. Engng. Power, Trans. ASME, Series A197395.
15.
KlassenH. A.WoodJ. R.SchumannL. F.‘Experimental performance of a 16.10 centimeter-tip-diameter sweptback centrifugal compressor designed for a 6:1 pressure ratio’, NASA TMX-35521977.
16.
KlassenH. A.WoodJ. R.SchumannL. F.‘Experimental performance of a 13.65 centimeter-tip-diameter tandem-bladed sweptback centrifugal compressor designed for a pressure ratio of 6:1’, NASA Technical Paper 1091 1977.
SturgeD. P.CumpstyN. A.‘Two dimensional method for calculating separated flow in a centrifugal impeller’, J. Fluids Engng., Trans. ASME, Series I197597.
21.
SturgeD. P.‘Compressible flow in a centrifugal impeller with separation: A two dimensional calculation method’, Univ. of Cambridge Report 1976, CUED/A-Turbo/TR 82.
