Paper 72: Factors Governing the Creep Properties in Large Diameter 1 Per Cent Chromium-Molybdenum-Vanadium Rotor Forgings

Roques C. ‘High temperature behaviour of Cr-Mo-V steels’, Archiv f. d. Eisenhüttenwesen, November 1960.

Habraken L. ‘Some aspects of the bainite structure’. Fourth International Conference on Electron Microscopy (Springer-Verlag, Berlin, 1960).

McLean D. Hale K. F. ‘The stress sensitivity of creep’. Iron & St. Inst. Spec. Report No. 70, 1961, 19.

Conrad J. D. Mochel N. L. ‘Operating experiences with high temperature steam turbine rotors and design improvements in rotor blade fastenings’, Amer. Soc. mech. Engrs Paper No. 57, P.W.R. 10.

Nutting J. Arrowsmith J. E. ‘The metallography of creep resistant alloys’, Iron & St. Inst. Spec. Report No 70, 1961, 147.

Smith R. ‘Precipitation processes in steels’. Iron & St. Inst Spec. Report No. 64, 1959, 307.

Seal A. K. Honeycombe R. W. K. ‘The effect of tantalum and niobium on the tempering of certain vanadium and molybdenum steels, J. Iron St. Inst. 1958 188, 343.

Makepiece C. E. ‘An investigation of uranium-bearing, Cr-Mo-V steels for elevated temperature Service’, Pt 1, Project F37, Physical Metallurgy Division Report, Canadian Dept. of Mines, PM-R-61–6, May 1961, 115.

Goldschmidt H. J. ‘The structures of carbides in alloy steels’, J. Iron St. Inst. 1948 160, 345.

Andrade E. N. da C. Creep and recovery 1957, p. 284 (Amer. Soc. Metals, Cleveland, Ohio).

See Cottrell A. H. Dislocations and plastic flow in crystals 1953, p. 195 (Oxford University Press, London).

Li J. C. M. ‘A dislocation mechanism of transient creep’ Acta. Met. 1963 11, 1269.

Li J. C. M. ‘Cooperative motion of dislocation nodes in steady state creep’, Trans. Amer. Inst. mech. Engrs 1963 227, 1474.

Glasstone S. Laidler K. J. Eyring H. The theory of rate processes 1941, p. 184, p. 480 (McGraw-Hill Book Co., New York, N.Y.).

Garofalo F. ‘An empirical relation defining the stress dependence of minimum creep rate in metals’, Trans. Amer. Inst. mech. Engrs. 1963 227, 351.