Paper 22: An Experimental Study of Multiaxial Creep in Tubes

Vicat J. L. ‘Note sur l'allongement progressif du fil de fer soumis à diverses tensions’, Ann. ponts et chausées, Mem. et Doc. 1834 7(1), 40.

Odqvist F. K. G. ‘Creep stresses in a rotating disc’, Proc. Fourth Intern. Congr. Appl. Mech. 1934 (Cambridge University Press).

Ros M. Eichinger A. ‘Versuche zur Klärung der Frage der Bruchgefahr’, Materialprufungamtalt an der E.T.H. Zurich, 34 (1929).

Soderberg C. R. ‘Interpretation of creep tests for machine design’, Trans. Amer. Soc. mech. Engrs 1936 58, 733.

Marin J. ‘Design of members subject to creep at high temperatures’, J. appl. Mech. 1937 4, 21.

Wahl A. M. ‘Application of the modified Bailey equations for creep under biaxial tension’, Proc. Fourth U.S. Nat. Congr. Appl. Mech. Berkeley (1962).

Bailey R. W. ‘The utilization of creep test data in engineering design’, Proc. Instn mech. Engrs 1935 131, 131.

Finnie I. Heller W. R. Creep of engineering materials 1959 (McGraw-Hill Book Co. Inc., New York).

Finnie I. ‘Stress analysis in the presence of creep’, Appl. Mech. Rev. 1960 13, 705.

Johnson A. E. ‘Creep under complex stress systems at elevated temperatures’, Proc. Instn mech. Engrs, 1951 164, 432. See also Complex-stress creep, relaxation and fracture of metallic alloys 1962(H.M. Stationery Office) for a comprehensive review of Dr Johnson's work.

Wahl A. M. ‘Analysis of creep in rotating discs based on the Tresca criterion and associated flow rule’; J. appl. Mech. 1956 23, 231; AMR 1956 9, Rev. 3244. ‘Stress distribution in rotating discs subjected to creep at elevated temperature’, J. appl. Mech. 1957 24, 299. ‘Further studies of stress distribution in rotating discs and cylinders under elevated temperature creep conditions’, J. appl. Mech. 1958 25, 243; AMR 1958 11, Rev. 2061. See also Wahl, A. M. et al., ‘Creep tests of rotating discs at elevated temperature and comparison with experiment’, J. appl. Mech. 1954 21, 225.

Finnie I. ‘A tester for creep-rupture under multiaxial stress’, Proc. Soc. exp. Stress Anal. 1959 16 (no. 2), 49.

Finnie I. ‘A high temperature diameter gauge’, Rev. Sci. Instr. 1958 29, 1054.

Finnie I. ‘Creep buckling of tubes in torsion’, J. aero. Sci. 1958 25, 66.

Schoek G. ‘Theories of creep’ in Mechanical behaviour of metals at elevated temperature 1961, ed. Dorn J. E. (McGraw-Hill Book Co. Inc., New York).

Read W. T. Dislocations in crystals 1953(McGraw-Hill Book Co. Inc., New York).

Finnie I. ‘Steady-state creep of a thick-walled cylinder under combined internal pressure and axial load’, Trans. Amer. Soc. mech. Engrs 1960 82D, 689.