Design Considerations for Long Life at Elevated Temperatures

Mendelson A. Manson S. S. ‘The extrapolation of families of curves by recurrence relations, with application to creep-rupture data’, J. basic Engng, Trans. Amer. Soc. mech. Engrs 1960 82 (Series D).

Grant N. J. Bucklin A. G. ‘On extrapolation of short time stress-rupture data’, Trans. Amer. Soc. Metals 1950 42, 720.

Brozzo P. ‘A method for the extrapolation of creep and stress-rupture data of complex alloys’, Proc. Jt Int. Conf. Creep, 1963 6–77 (Institution of Mechanical Engineers, Lond).

Allen N. P. ‘The extrapolation of creep tests, a review of recent opinion’, Lecture to the Institute of Metals, London, Nov. 1960.

Walles K. F. A. Graham A. ‘Regularities in creep and hot-fatigue data’, Curr. Pap. aero. Res. Coun. 1956 CP 379 and CP 380 (H.M. Stationery Office, Lond).

Conrad H. ‘Correlation of high temperature creep and rupture data’, J. basic Engng, Trans. Amer. Soc. mech. Engrs 1959 81 (Series D), 617.

Clauss F. J. ‘An examination of high-temperature stress-rupture correlating parameters’, Proc. Amer. Soc. Test. Mater. 1960 60, 905.

Larson F. R. Miller J. ‘A time-temperature relationship for rupture and creep stresses’, Trans. Amer. Soc. mech. Engrs 1952 74, 765.

Manson S. S. Haferd A. M. ‘A linear time-temperature relation for extrapolation of creep and stress-rupture data’, Tech. Notes nat. adv. Comm. Aero., Wash. 1953 No. 2890.

Orr R. L. Sherby O. D. Dorn J. E. ‘Correlations of rupture data for metals at elevated temperatures’, Trans. Amer. Soc. Metals 1954 46, 113.

Mullendore A. W. Dhosi J. M. Widner R. Grant N. J. ‘Study of parameter techniques for the extrapolation of creep rupture properties’, Proc. Jt Int. Conf. Creep, 1963 6–15 (Institution of Mechanical Engineers, Lond.).

Manson S. S. Discussion on a.

Larke E. C. Inglis N. P. ‘A critical examination of some methods of analysing and extrapolating stress-rupture data’, Proc. Jt Int. Conf. Creep, 1963 6–33 (Institution of Mechanical Engineers, Lond).

Murry G. ‘Extrapolation of the results of creep tests by means of parametric formulae’, Proc. Jt Int. Conf. Creep, 1963 6–87 (Institution of Mechanical Engineers, Lond).

Manson S. S. Discussion on a.

Manson S. S. Brown W. F. jun. ‘Influences of stress concentrations at elevated temperatures and the effects of nonsteady load and temperature conditions on the creep of metals’, A.S.T.M. Spec. tech. Publ. 1959 (Dec.) No. 260.

Goldhoff R. M. Discussion on a.

Manson S. S. Succop G. ‘Stress rupture properties of Inconel 700 and correlation on the basis of several time-temperature parameters’, A.S.T.M. Spec. tech. Publ. 1956 No. 174.

Glen J. ‘The shape of creep curves’, Amer. Soc. mech. Engrs, Paper 62-WA-133.

Hoff N. J. ‘Mechanics applied to creep’, William M. Murray Lecture Society of Experimental Stress Analysis 1958 (Nov.).

Manson S. S. Mendelson A. ‘Optimization of parametric constants for creep rupture data by means of least squares’, Memor. nat. aero. Space Admin. 1959 No. 3-10-59.

Forsythe G. E. ‘Generation and use of orthogonal polynomials for data fitting with a digital computer’, J. Soc. industr. appl. Math. 1957 5 (No. 2) (June).

Manson S. S. Succop G. Brown W. F. jun. ‘The application of time-temperature parameters to accelerated creep-rupture testing’, Trans. Amer. Soc. Metals 1959 51, 911.

Manson S. S. Brown W. F. jun. Garofalo F Smith G. V. Royle B. W. ‘Validity of time-compensated temperature parameters for correlating creep and creep-rupture data’, Trans Amer. Soc. mech. Engrs 1956 78, 1429.

Mendelson A. Hirschberg M. H. Manson S. S. ‘A general approach to the practical solution of creep problems’, J. basic Engng, Trans Amer. Soc. mech. Engrs 1959 81 (Series D), 585.

Davis E. A. ‘Extension of iteration method for determining strain distributions to the uniformly stressed plate with a hole’, J. appl. Mech., Trans Amer. Soc. mech. Engrs 1963 30 (Series E), 210.

Johnson A. E. ‘Complex-stress creep of metals’, Metallurg. Rev. 1960, 5 (No. 20).

Wahl A. M. ‘Application of the modified Bailey equations for creep under biaxial tension stress’, Proc. 4th U.S. nat. Cong. Applied Mechanics 1962 vol. 2, 1167 (American Society of Mechanical Engineers, New York).

Finnie I. ‘An experimental study of multiaxial creep in tubes’, Proc. Jt Int. Conf. Creep, 1963 6–33 (Institution of Mechanical Engineers, Lond).

Manson S. S. ‘Thermal stresses and thermal shock’, Mechanical behaviour of materials at elevated temperatures (ed. Dorn J. E. ) 1961 Ch. 13, 393 (McGraw-Hill, Lond. and New York).

Manson S. S. ‘Creep under nonsteady temperatures and stresses’, ibid. Ch. 14, 419.

Kennedy A. J. ‘Creep of metals under interrupted stressing’, Proc. roy. Soc. 213(Series A) 1952, 492.

Kennedy A. J. ‘The physical and computing significance of an electrical analogue of creep and recovery’, Brit. J. appl. Phys. 1955 6, 49.

Taira S. ‘Lifetime of structures subjected to varying load and temperature’, Colloquium: Creep in structures (ed. Hoff N. J. ) 1962 96 (Springer-Verlag, Berlin).

Moyar G. J. Sinclair G. M. ‘Cyclic strain accumulation under complex multiaxial loading’, Proc. Jt Int. Conf. Creep, 1963 2–47 (Institution of Mechanical Engineers, Lond).

Onaran K. Findley W. N. ‘Combined stress creep experiments on viscoelastic material with abrupt changes in state of stress’, Proc. Jt Int. Conf. Creep, 1963 2–85 (Institution of Mechanical Engineers, Lond).

Gubser J. L. Sidebottom O. M. Shammamy M. R. ‘Creep torsion of prismatic bars’, Proc. Jt Int. Conf. Creep, 1963 2–99 (Institution of Mechanical Engineers, Lond).

Namestnikov V. S. ‘Combined-stress creep under changing loads’, Proc. Jt Int. Conf. Creep, 1963 2–109 (Institution of Mechanical Engineers, Lond).

Rabotnov Y. N. ‘On the equation of state of creep’, Proc. Jt Int. Conf. Creep, 1963 2–117 (Institution of Mechanical Engineers, Lond).

Crussard C. ‘Transient creep of metals’, Proc. Jt Int. Conf. Creep, 1963 2–123 (Institution of Mechanical Engineers, Lond).

Manson S. S. ‘Analysis of rotating discs of arbitrary contour and radial temperature distribution in the region of plastic deformation’, Proc. 1st U.S. nat. Cong. Applied Mechanics 1952 569 (American Society of Mechanical Engineers, New York).

Wahl A. M. Sankey G. A. Manjoine M. J. Shoemaker E. ‘Creep tests of rotating disks at elevated temperature and comparison with theory’, J. appl. Mech., Trans. Amer. Soc. mech. Engrs 1954 76, 225.

N.A.C.A. Lewis laboratory staff ‘Factors that affect operational reliability of turbojet engines’, Res. Memor. nat. adv. Comm. Aero., Wash. 1956 No. E55H02.

Trumpler W. E. Jun. ‘The creep phenomenon as it affects steam turbine rotor life’, Proc. Jt Int. Conf. Creep, 1963 7–69 (Institution of Mechanical Engineers, Lond).

Walker C. D. ‘Strain-fatigue properties of some steels at 950°F (510°C)—with a hold in the tension part of the cycle’, Proc. Jt Int. Conf. Creep, 1963 3–49 (Institution of Mechanical Engineers, Lond).