Discussion

Weir R. H. ‘High performance turbine engines’, J. R. Aero. Soc. 1962, 66, No. 621.

Ainley D. G. ‘Internal air cooling for turbine blades: A general design survey’, Brit. Rep. Mentor. Aero. Res. Council, Lond. 1957, No. 3013.

Fray D. E. Barnes J. F. ‘The cooling performance of a set of extruded air cooled turbine blades in an experimental high temperature turbine (No. 126)’, 1962 Brit. Aero. Res. Council Paper No. 24565.

Pinkel B. ‘A summary of N.A.C.A. research on heat transfer and friction for air flowing through a tube with a large temperature difference’, Trans. Amer. Soc. mech. Engrs 1954 76, 305.

Barnes J. F. Jackson J. D. ‘Heat transfer to air, carbon dioxide and helium flowing through smooth circular tubes under conditions of large surface/gas temperature ratio’, J. mech. Engng Sci. 1961 3, No. 4.

Squire H. B. ‘Heat transfer calculation for aerofoils’, Brit. Rep. Mentor. Aero. Res. Council, Lond. 1942, No. 1986.

Wilson D. G. Pope J. A. ‘Convective heat transfer to turbine blade surfaces’, Proc. Instn mech. Engrs, Lond. 1954 168, No. 36861.

Hodge R. I. ‘A turbine nozzle cascade for cooling studies, parts I and II’, Brit. Aero. Res. Council Current Paper Nos. 492 and 493, 1960.

Stanworth C. G. Paine D. S.C. ‘Design and operation of the N.G.T.E. thermal shock analogue’, Brit. Aero. Res. Council Current Paper No. 557, 1959.

Cox M. Glenny R. J. E. ‘Thermal fatigue investigations’, Engr, Lond. 1960 210, No. 5457.

Mountain A. R. Barnes J. F. ‘Heat transfer to a jet of air impinging normally on to the inside surface of a hot smooth tube’, J. R. Aero. Soc. 1963 67, No. 632.

Ainley D. G. ‘An experimental single stage turbine: Part II research on the performance of a type of internally air cooled turbine blade’, Proc. Instn mech. Engrs, Lond. 1953 167, No. 4, 341–351.

Fray D. E. Waldren N. E. Hart C. J. ‘Investigations on an experimental air cooled turbine’, Brit. Rep. Memor. Aero. Res. Council, Lond. 1960, No. 3144.

Barnes J. F. Fray D. E. ‘The effects of cooling on the aerodynamic performance of an experimental high temperature turbine (No. 126)’, Brit. Aero. Res. Council Paper No. 24566, 1962.

Barnes J. F. Northwood J. E. Fray D. E. ‘The behaviour of air-cooled extruded rotor blades subjected to steady high temperature and rotational speed’, Brit. Aero. Res. Council Paper No. 24567, 1962.

Howe P. W. H. ‘Mathematical techniques applying to the thermal fatigue behaviour of high temperature alloys’, Aero. Quart. 1962 XIII, November.

Glenny R. J. E. ‘Thermal fatigue’, Metallurg. Rev. 1961 6, No. 24.

Ainley D. G. Proc. symposium on some developments in techniques for temperature measurement 1962 (Institution of Mechanical Engineers, London).

Ainley D. G. Matheson G. C. R. ‘A method of performance estimation for axial flow turbines’, Brit. Rep. Memor. Aero. Res. Council, Lond. 1957, No. 2974.

Henry Wiggin & Co. Ltd. ‘The Nimonic series of high temperature alloys’, 1961. Publication No. 2358.

Barnes J. F. ‘Concerning the freedom of a cooled blade to bend under the influence of a non-uniform chordwise temperature distribution’, 1963. Unpublished M.O.A. report.