Paper 10: Elastohydrodynamics

‘Elastohydrodynamic lubrication’, Proc. Instn mech. Engrs 1965–66 180 (Pt 33).

Martin H. M. ‘Lubrication of gear teeth’, Engineering, Lond. 1916 102, 199.

Peppler W. ‘Untersuchungen über die Druckübertragung bei belasteten und geschmierten umlaufenden achsparallelen Zylindern, Maschinenelemente-Tagung, Aachen 1935’, VDI Verlag 1936 (Berlin), 42.

Peppler W. ‘Druckübertragung und geschmiert zylindrischen Gleit- und Wälzflächen’, VDI ForschHft 1938, 391.

Meldahl A. ‘Contribution to the theory of the lubrication of gears and the stressing of the lubricated flanks of gear teeth’, Brown Boveri Rev. 1941 28 (11), 374.

Merritt H. E. ‘Worm gear performance’, Proc. Instn mech. Engrs 1935 129, 127.

Gatcombe E. K. ‘Lubrication characteristics of involute spur gears—a theoretical investigation’, Trans. Am. Soc. mech. Engrs 1945 67, 177.

McEwen E. ‘The effect of variation of viscosity with pressure on the load-carrying capacity of oil films between gear teeth’, J. Inst. Petrol. 1952 38, 646.

Blok H. ‘Fundamental mechanical aspects of thin film lubrication’, Ann. N.Y. Acad. Sci. 1950 53, 779.

Grubin A. N. Central Scientific Research Institute for Technology and Mechanical Engineering, Book No. 30 (Moscow) 1949; D.S.I.R. Trans. No. 337.

Petrusevich A. I. ‘Fundamental conclusions from the contact-hydrodynamic theory of lubrication’, Izv. Akad. Nauk SSSR. (OTN) 1951 2, 209.

Dowson D. Higginson G. R. ‘Elastohydrodynamic lubrication—The fundamentals of roller and gear lubrication’, The Commonwealth and International Library 1966 (Pergamon Press, London).

Dowson D. Higginson G. R. ‘New roller-bearing lubrication formula’, Engineering, Lond. 1961 192, 158.

Blok H. ‘Correlation review of theoretical and experimental data on elastohydrodynamic lubrication’, Tech. Hogesch. 1959 (Laboratorium voor Werktuigonderdelen, Delft, Holland).

Sternlicht B. Lewis P. Flynn P. ‘Theory of lubrication and failure of rolling contact’, J. basic Engng, Trans. Am. Soc. mech. Engrs 1961 83 (Series D, No. 2), 213.

Cheng H. S. Sternlicht B. ‘A numerical solution for the pressure, temperature, and film thickness between two infinitely long, lubricated rolling and sliding cylinders, under heavy loads’, A.S.M.E. Paper No. 64-LUB-11, 1964.

Dowson D. Whitaker A. V. ‘A numerical procedure for the solution of the elastohydrodynamic problem of rolling and sliding contacts lubricated by a Newtonian fluid’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 57.

Lewicki W. ‘Some physical aspects of lubrication in rolling bearings and gears’, Engineer, Lond. 1955 200 (176), 212.

Sibley L. B. Orcutt F. K. ‘Elastohydrodynamic lubrication of rolling contact surfaces’, Trans. Am. Soc. lubric. Engrs 1961 4 (No. 2), 234.

Misharin J. A. ‘Influence of the friction conditions on the magnitude of the friction coefficient in the case of rolling with sliding’, Proc. International Conference on Gearing 1958 Paper 40, 159 (Instn Mech. Engrs, London).

Crook A. W. ‘The lubrication of rollers—IV: Measurements of friction and effective viscosity’, Phil. Trans., Series A 1963 255, 281.

Milne A. A. ‘A theory of rheodynamic lubrication for a Maxwell liquid’, Proc. Conference on Lubrication and Wear 1957 Paper 41, 66 (Instn Mech. Engrs, London).

Tanner R. I. ‘Full-film lubrication theory for a Maxwell liquid’, Int. J. mech. Sci. 1960 1, 206.

Burton R. A. ‘An analytical investigation of visco-elastic effects in the lubrication of rolling contact’, Trans. Am. Soc. lubric. Engrs 1960 3 (No. 1), 1.

Bell J. C. ‘Lubrication of rolling surfaces by a Ree–Eyring fluid’, Trans. Am. Soc. lubric. Engrs 1962 5, 160.

Higginson G. R. ‘A model experiment in elastohydrodynamic lubrication’, Int. J. mech. Sci. 1962 4, 205.

Dowson D. Longfield M. D. ‘Distribution of pressure and temperature in a highly loaded lubricated contact’, Proc. Lubrication and Wear Convention (Bournemouth) 1963 Paper 3, 27 (Instn Mech. Engrs, London).

Longfield M. D. ‘Pressure distributions in a highly loaded lubricated contact’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 113.

Niemann G. Gartner F. ‘Distribution of hydrodynamic pressure on counterformal line contacts’, A.S.L.E. Preprint 641-C-12, 1964.

Kannel J. W. ‘Measurements of pressure in rolling contact’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 135.

Christensen H. ‘The oil film in a closing gap’, Proc. R. Soc., Series A 1962 266, 312.

Archard J. F. Kirk M. T. ‘Lubrication at point contacts’, Proc. R. Soc., Series A 1961 261, 532.

Archard J. F. Cowking E. W. ‘Elastohydrodynamic lubrication at point contacts’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 47.

Dowson D. Higginson G. R. ‘A theory of roller bearing lubrication and deformation’, Proc. Lubrication and Wear Convention (Bournemouth) 1963 Paper 19, 216 (Instn Mech. Engrs, London).

Garnell P. Higginson G. R. ‘The mechanics of roller bearings’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 197.

Harris T. A. ‘An analytical method to predict skidding in high speed roller bearings’, A.S.L.E. Preprint 65-LC-14, 1965.

Dowson D. Higginson G. R. ‘A theory of involute gear lubrication’, Proc. Symposium on Gear Lubrication 1964, 118 (Institute of Petroleum, London).

Dudley D. W. ‘Elastohydrodynamic behaviour observed in gear tooth action’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 206.

Higginson G. R. ‘The theoretical effects of elastic deformation of the bearing liner on journal bearing performance’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 31.

Hooke C. J. ‘Theoretical work on the elastohydrodynamic lubrication of an infinitely long journal bearing—Research report’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 235.

Dowson D. Taylor C. M. ‘Elastohydrostatic lubrication of circular plate thrust bearings’, A.S.M.E. Paper 66-LUB S-15, 1966.

Blok H. ‘Inverse problems in hydrodynamic lubrication and design directives for lubricated flexible surfaces’, Proc. International Symposium on Lubrication and Wear (University of Houston) 1965 (McCutchan Publ. Corp.).

Hirano F. Ishiwata H. ‘The lubricating condition of a lip seal’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 187.

Jagger E. T. Walker P. S. ‘Further studies of the lubrication of synthetic rubber rotary shaft seals’, Proc. Instn mech. Engrs 1966–67 181 (Pt I, No. 9), 191.

Hooke C. J. Lines D. J. O'Donoghue J. P. ‘Elastohydrodynamic lubrication of O-ring seals’, Proc. Instn mech. Engrs 1966–67 181 (Pt I, No. 9), 205.

Dowson D. Swales P. D. ‘An elastohydrodynamic approach to the problem of the reciprocating seal’, B.H.R.A. Third International Conference on Fluid Sealing (Cambridge, England) 1967 Paper F3.

Baron H. W. Enting J. ‘The development of a flexible seal for reciprocating motions’, B.H.R.A. Third International Conference on Fluid Sealing (Cambridge, England) 1967, Paper G3.

Tanner R. I. ‘An alternative mechanism for the lubrication of synovial joints’, Phys. Med. Biol. 1966 11 (No. 1), 119.

Dowson D. ‘Modes of lubrication in human joints’, Proc. Symposium on Lubrication and Wear in Living and Artificial Human Joints 1967 Paper 12 (Instn Mech. Engrs, London).

Dyson A. Naylor H. Wilson A. R. ‘The measurement of oil-film thickness in elastohydrodynamic contacts’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 119.

Dyson A. ‘Flow properties of mineral oils in elastohydrodynamic lubrication’, Phil. Trans., Series A 1965 258 (No. 1093), 529.

Dyson A. ‘Film thicknesses in elastohydrodynamic lubrication by silicone fluids’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3K), 97.

Christensen H. ‘Nature of metallic contact in mixed lubrication’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 147.

Tallian T. E. McCool J. I. Sibley L. B. ‘Partial elastohydrodynamic lubrication in rolling contact’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 169.

Proc. Symposium on Fatigue in Rolling Contact 1963 (Instn Mech. Engrs, London).

Kirk M. T. ‘Hydrodynamic lubrication of Perspex’, Nature, Lond. 1962 194, 965.

Cameron A. Gohar R. ‘Theoretical and experimental studies of the oil film in lubricated point contact’, Proc. R. Soc., Series A 1966 291, 520.

Westlake F. J. Cameron A. ‘Fluid film interferometry in lubrication studies’, Nature, Lond. 1967 214 (No. 5088), 633.

Dowson D. Jones D. A. ‘Lubricant entrapment between approaching elastic solids’, Nature, Lond. (to be published).

Dowson D. Higginson G. R. ‘A numerical solution to the elastohydrodynamic problem’, J. mech. Engng Sci. 1959 1 (No. 1), 6.

Archard G. D. Gair F. C. Hirst W. ‘The elastohydrodynamic lubrication of rollers’, Proc. R. Soc., Series A 1961 262, 51.

Osterle J. F. Stephenson R. R. ‘A direct solution of the elastohydrodynamic lubrication problem’, Trans. Am. Soc. lubric. Engrs 1962 5, 365.

Dowson D. Whitaker A. V. ‘The isothermal lubrication of cylinders’, ASLE Trans. 1965 8 (No. 3), 224.

Herrebrugh K. ‘Solving the incompressible and isothermal problem in elastohydrodynamic lubrication through an integral equation’, Internal Report, 1966 (Laboratory of Machine Components, University of Technology, Delft, The Netherlands).

Gohar R. Cameron A. ‘The mapping of elastohydrodynamic contacts’, A.S.L.E./A.S.M.E. Lubrication Conference (Minneapolis) 1966, Preprint No. 66 LC-21.

Archard J. F. ‘Experimental studies of elastohydrodynamic lubrication’, Proc. Instn mech. Engrs 1965–66 180 (Pt 3B), 17.