Abstract
The paper summarizes the results of an experimental investigation on the effects of variation in bearing width and radial clearance on the operating conditions of centrally loaded clearance journal bearings, the bearing arc being kept constant at 120 deg. The investigation, which was carried out prior to 1940, is complementary to an earlier paper by the author in which the effects of variations in bearing width and arc of embrace were investigated. The experimental results are compared with theoretical values modified by the relevant leakage coefficients. The measure of agreement obtained indicates that theoretical values so modified may be used with confidence in design.
A short series of experiments is described; in these, high-point contact at starting and stopping is eliminated by supplying oil to a groove in the loaded side of the bearing at a pressure sufficiently great to overcome the applied load. The effect of a groove on the loaded side of the brass under various conditions of lubrication is investigated.
Get full access to this article
View all access options for this article.