The Mobile Locomotive Testing Plant of the London,Midland and Scottish Railway

Abstract

To measure the performance and efficiency characteristics of any type of locomotive under service conditions, it is necessary for the locomotive to be worked at different rates of speed and loading, and for the conditions of working to be maintained constant for sufficient time for the necessary observations to be made. Such conditions have been achieved on certain continental railways, over long stretches of straight and level track, by the use of various forms of loading capable of adjustment to maintain constant speed and to absorb the power of the locomotive. This method of testing has hitherto been impossible on the L.M.S. Railway, as no suitable section of line was available. A special testing train has now been constructed in which the power of the locomotive is absorbed by a number of electrically-braked vehicles, the loading of which is controlled by an electronic regulator so that constant speed is automatically maintained and the effects of gradients, curves, etc., are immediately compensated. The train consists of three braking units, having different gear ratios, which may be used in any combination, a dynamometer car which records the performance of the locomotive and from which the braking units are controlled, and a special tender for measuring the fuel and water consumption of steam locomotives.

Get full access to this article

View all access options for this article.

References

Andrews

H. I.

“Electrical Weighing” (to be published shortly).

Binns

Bairstow

1936 Jl. Inst. Fuel, vol. 10, p. 79, “Combustion Control by means of Electrical Meters”.

Borodin

1886 Proc. I. Mech. E., p. 297, “Experiments on the Steam-jacketing and Compounding of Locomotives in Russia”.

Czeczott

1931 Bulletin International Railway Congress, vol. 13, p. 575, “A description of the method of carrying out locomotive tests on the Polish State Railways”.

Dalby

W. E.

1920 “Steam Power” (Edwin Arnold, London).

Desdouits

1883 Revue Générale des Chemins de Fer, vol. 6, part 2, p. 215, “Nouvel appareil dynamométrique applicable à la mesure des efforts … développés dans la traction des trains …”.

Diamond

E. L.

1935 Railway Gazette, vol. 62, p. 691, “The Horse-power of Locomotives—Its Calculation and Measurement”.

Doyen

1911 Bulletin International Railway Congress, vol. 25, p. 145, “The Belgian Method of Testing Locomotives While Running”.

Günther

Solveen

1931 Glasers Annalen, vol. 108, p. 46, “Neue Einrichtungen und Methoden zur wissenschaftlichen Untersuchung von Lokomotiven und ihren Einzelteilen”.

10.

Johansen

F. C.

1936 Proc. I. Mech. E., vol. 134, p. 91, “The Air Resistance of Passenger Trains”.

11.

Lewis-Dale

1936 Jl. Inst. Fuel, vol. 10, p. 68, “Some Measurements by Gas Analysis of the Efficiency of the Locomotive Furnace”.

12.

Lomonossoff

1913 “Glavneishie rezul'taty issledovaniia parovozov 0–4–0 i 1–4–0” (Peterburg).

13.

1925 “Opyty nad tipami parovozov. V. 1, Opyty proizvodivshiecia v. 1912–1914 g. g na B. Nikolaevskoi (Nyne Oktiabrskoi) Zheleznoi Doroge”, vol. 1 (Bukwa Press, Berlin).

14.

Lomonossoff

1926 “Lokomotivversuche in Russland” (V.D.I.-Verlag, Berlin).

15.

Robson

1943 Proc. Inst. Locomotive Eng., vol. 33, p. 171, “The Counter Pressure Brake Method of Testing Locomotives”.

16.

Schmidt

E. C.

1910 University of Illinois, Eng. Experiment Station, Bulletin No. 43, “Freight Train Resistance”.

17.

Whiteley

A. L.

1936 Jl.I.E.E., vol. 78, p. 516, “Applications of the Hot-Cathode Grid-Controlled Rectifier, or Thyratron”.

18.

1946 Jl.I.E.E., vol. 93, part 2, p. 353, “Theory of Servo Systems, with Particular Reference to Stabilization”.