Buckling of Externally Pressurized Composite Torispherical Domes

Abstract

The results of external pressure buckling tests on 0.25 m diameter woven composite (mainly CFRP) domes are given in the paper and they are compared with the predictions of the shell buckling program BOSOR 4. The agreement between theory and experiment was satisfactory. The tests also show that the buckling strength of CFRP torispheres is good. They could replace steel torispheres and would be considerably lighter.

The buckling pressures of the woven composite domes are a function of the Young modulus E but the relation is not a simple linear one (the in-plane shear modulus G₁₂ also needs to be taken into account). Results of some tests on CFRP and GFRP domes lend support to this statement.

The provisions of BS 4994, when applied to these domes, predict that buckling is the controlling failure mode. While this is correct, the buckling pressures predicted by BS 4994 seem rather low.

The effect of dome thickness on the buckling pressures was expected to vary as (t/R)². This was confirmed herein, to a limited extent, by a few tests on shallow CFRP domes.

Get full access to this article

View all access options for this article.

References

Hom

Fibre reinforced plastics for hydrospace applications. Mechanics of Composite Mater., 1967, 455–466.

Galletly

G. D.

Mac

Buckling of FRP/steel torispherical shells under external pressure. Proc. Instn Mech. Engrs, Part C, 1988, 202(C6), 409–420.

BS 2782: 1978 Plastics, British Standards Institution, London, 1978.

Bushnell

Computerised analysis of shells—governing equations. Comput. Structs., 1984, 18, 471–536.

Cohen

G. A.

Buckling of laminated anisotropic shells including transverse shear deformations. Comp. Meth. Appl. Mech. Engng, 1981, 26, 197–204.

Noor

A. K.

Peters

J. M.

Analysis of laminated anisotropic shells of revolution. ASCE J. Engng Mech., 1987, 113, 49–65.

Plantema

F. J.

Sandwich construction, 1966 (Wiley, New York).

Jones

R. M.

Buckling and vibration of unsymmetrically laminated cross-ply rectangular plates. AIAA J., 1973, 11, 1626–1632.

Sawyer

J. W.

Flutter and buckling of general laminated plates. J. Aircraft, 1977, 14, 387–391.

10.

Muc

Optimal fibre orientation for simply-supported, angle-ply plates under biaxial compression. Comput. Structs, 1988, 9, 161–172.

11.

Radhamohan

S. K.

Shirode

A. V.

Buckling of orthotropic torispherical pressure vessels. Comput. Structs, 1975, 5, 155–158.

12.

Galletly

G. D.

Blachut

Kruzelecki

Plastic buckling of imperfect hemispherical shells subjected to external pressure. Proc. Instn Mech. Engrs., Part C, 1987, 201(C3), 153–170.

13.

Noor

A. K.

Stability of multilayered composite plates. Fibre Sci. Technol., 1975, 8, 261–266.

14.

Bebich

Guz

A. N.

Stability of rods, plates and shells of composite materials (three dimensional formulation): survey. Soviet Appl. Mechanics, 1984, 10, 835–849.

15.

Muc

Galletly

G. D.

Moreton

D. N.

On the buckling of dented torispherical domes reinforced by composites. Report A/138/88, November 1988, Department of Mechanical Engineering, University of Liverpool.

16.

BS 4994: 1987 Specification for vessels and tanks in reinforced plastics, British Standards Institution, London, 1987.

17.

BS 5500: 1985 Specifications for unfired fusion welded pressure vessels, British Standards Institution, London, 1985.

18.

Vinson

J. R.

Chou

T.-W.

Composite materials and their use in structures, 1975 (Applied Science Publishers, London).

19.

Guz

A. N.

(Ed.) Mechanics of composite materials and structures (in Russian), Vol. 2, 1983 (Nau Kova Dum Ka, Kiev).