Implementation Requirements for Electronic Standard Component Catalogues

Abstract

The majority of information regarding standard components is currently delivered to the engineering designer in paper-based catalogues. These generally contain performance and physical data together with methods for selecting the appropriate component. When engineers are engaged in a design problem requiring the use of a standard component, they are faced with mantially searching the catalogues and carrying out calculations by hand. The tedious and time consuming nature of this activity frequently means a nonoptimal component is chosen on the grounds that it has been used before. Computer aided selection of components seeks to improve the efficiency in this situation, with the aim of providing access in an unbiased way to the most appropriate item. Experience has shown that this does not just mean the implementation of selection algorithms; the user is looking for a wide range of facilities in the ‘electronic catalogue’. Yet the increasing number of packages that are now available are widely deficient. This paper aims to set out the requirements for comprehensiveness for what will be the delivery medium for standard component information in the next decade.

References

Pahl

Beitz

Engineering design, 1984 (Springer Verlag, Berlin).

Deutschman

A. D.

Michels

W. J.

Wilson

C. E.

Machine design, 1975 (Addison-Wesley).

Wall

Finding and using product information, 1986 (Gower, Aldershot).

Pitts

Efficiency in the design office. Conference Proceedings, Wembley Conference Centre, 15–16. June 1983 (Mechanical Engineering Publications, London).

Cave

P. R.

Noble

C. E. I.

Engineering design data management. Proceedings of the International Conference on Engineering management, University College, Swansea, 1986 (Jackson, Redruth).

Vogwell

Cnlley

S. J.

Optimal component selection using engineering databases. Proceedings of International Conference on Engineering design, 1987 (ASME, New York).

Culley

S. J.

Vogwell

Hulme

G. W.

The use of component selection systems for automatic component selection. Proceedings of IMechE Conference on Effective CADCAM, 1987, paper C379/ 87, pp. 69–74. (Mechanical Engineering Publications, London).

Sim

S. K.

Chan

Y. W.

A knowledge-based expert system for rolling-element bearing selection in mechanical engineering design

Artif. Intell, Engng, 1991, 6 (3).

Chen

J. L.

Yan

H. S.

Shine

G. Y.

An expert system for machine screw selection

Expert Systems with Applic, 1992, 4, 141–146.

10.

Ashby

The engineering properties of materials

ACTA Metall, 1989, 37(5), 1273–1293.

11.

Cebon

Ashby

Computer aided materials selection for mechanical design

Metals and Materials, January 1992, pp. 25–30.

12.

Wood

Utilisation of knowledge based techniques in automated component selection procedures. Transfer report, School of Mechanical Engineering, University of Bath, January 1992.

13.

Yates

Costing techniques within component databases. MSc thesis, School of Mechanical Engineering, University of Bath (to be published).

14.

Hitchcox

Vendor software: catalogues on disks

Hydraulics and Pneumatics, April 1992, pp. 35, 55.

15.

VDA-PS standard for vendor catalogues linked to CAD systems. DIN technical report 14, 1990.

16.

BS 5750: Part 1: 1987; Part 2: 1987; Part 3: 1987; Part 4: 1990 Quality systems (British Standards Institution, London).

17.

ISO 9000–1987 Quality management and quality assurance standards—guide-lines for selection and use (International Standardization Organization, Switzerland).

18.

Culley

S. J.

Vogwell

Evaluation and feedback techniques for computer aided information handling systems. Proceedings of Fourth IMechE European Conference on Effective CADCAM, 1989, paper C395/019, pp. 129–135. (Mechanical Engineering Publications, London).