A Full Numerical Solution to the Problem of Microelastohydrodynamic Lubrication of a Stationary Compliant Wavy Layered Surface Firmly Bonded to a Rigid Substrate with Particular Reference to Human Synovial Joints
Restricted accessResearch articleFirst published online December, 1992
A Full Numerical Solution to the Problem of Microelastohydrodynamic Lubrication of a Stationary Compliant Wavy Layered Surface Firmly Bonded to a Rigid Substrate with Particular Reference to Human Synovial Joints
A full numerical solution procedure has been developed for the microelastohydrodynamic lubrication analysis of a stationary compliant wavy layered surface firmly bonded to a rigid substrate. The results obtained have been compared with those using a simplified method adopted by Dowson and Jin (I) and good agreement has been obtained.
Get full access to this article
View all access options for this article.
References
1.
DowsonD.JinZ. M.Microelastohydrodynamic lubrication of low-elastic-modulus solids on rigid substrates. J. Phys. D. Appl. Phys., 1992, 25, A116–A123.
2.
MedleyJ. B.DowsonD.WrightV.Transient elasto-hydrodynamic lubrication models for the human ankle joint. Engng in Medicine, 1984, 13, 137–151.
3.
MeijersP.The contact problem of a rigid cylinder on an elastic layer. Appl. Sci. Res., 1968, 18, 353–383.
4.
JinZ. M.The micro-elastohydrodynamic lubrication of synovial joints. PhD thesis, University of Leeds, 1988.
5.
DowsonD.JinZ. M.The influence of elastic deformation upon film thickness in lubricated bearings with low elastic modulus coatings. Mechanics of coating. Proceedings of Sixteenth Leeds-Lyon Symposium on Tribology (Eds DowsonD.TaylorC. M.GodetM.), 1990, pp. 263–270 (Elsevier, Amsterdam).
