A Numerical Method for Noise Optimization of Engine Structures

Abstract

A numerical procedure is described for optimizing finite element models of engine structures for minimum noise radiation. A statistical technique is used to select sample points in a multi-dimensional design variable space from which an approximating response surface is derived. Optimization of this analytic model is then carried out interactively with variable bounds and constraints as required to meet design objectives. The underlying noise analysis calculation uses a modal analysis algorithm to determine the surface vibration velocity and hence the radiated sound power. It incorporates a sophisticated procedure to determine the forces applied by the crank train to the cylinder block and head. Although computationally intensive, useful design studies are now practical using concept level finite element models.

Get full access to this article

View all access options for this article.

References

Lalor

Petyt

Noise assessment of engine structure designs by finite element techniques; engine noise: excitation, vibration and radiation, 1982, pp. 211–244 (Plenum Press, New York).

Milsted

M. G.

Zhang

Hall

R. A.

A numerical procedure for engine noise optimization. Fifth International Congress on Numerical methods in automobile engineering, Würzburg, 1990, pp. 811–820 (VDI).

Martin

I. T.

Law

Prediction of crankshaft and flywheel dynamics. EAEC Second Conference on Powertrain and chassis engineering, Strasbourg, 1989, paper C382/046, pp. 487–498.

Sehmi

N. S.

Large order structural eigenanalysis techniques, 1989 (Ellis Horwood, Chichester).

Turner

G. L.

Milsted

M. G.

Hanks

The adaptation of Kron's method for use with large finite-element models. Trans. ASME, J. Vibr., Acoust., Stress and Reliability in Des., 1986, 108, 405–410.

Khuri

A. I.

Cornell

J. A.

Response surfaces: designs and analyses, 1987 (Dekker, New York).

NAG FORTRAN library manual mark 11, 1984 (NAG Central Office, Oxford).

Ott

Kaiser

H.-J.

Meyer

Finite element analysis of the dynamic behaviour of an engine block and comparison with modal test results. MSC World Users Conference, Los Angeles, 1990.

Turner

G. L.

Milsted

M. G.

Hanks

Vibration characteristics of an in-line engine structure. IMechE Conference on Vehicle noise and vibration, 1984, paper C138/84, pp. 161–171.

10.

Daniel

Use of half-normal plots in interpreting factorial two-level experiments. Technometrics, 1959, 1, 311–341.

11.

Hoke

A. T.

Economical second-order designs based on irregular fractions of the 3n factorial. Technometrics, 1974, 16, 375–384.