Low Emission Vehicle Technology for Ultra Low Emissions Vehicle and European Stage 3 Emissions Standards

Abstract

Technology to meet the California Air Resources Board's (CARB) ultra low emissions vehicle (ULEV) legislation is being developed by most major vehicle manufacturers. To achieve the required reduction in cold start emissions, mainly HC and CO, compared to current three-way catalyst (TWC) technology, very early catalyst light-off has to be achieved. Electrically heated catalysts (EHC) have shown good potential, together with exhaust gas igniters (EGI) and close-coupled catalysts. A ‘total system’ approach has been demonstrated to achieve significant Federal test procedure (FTP) emissions reductions based on EHC, reduced thermal inertia manifolds and advanced engine control technology. This paper evaluates the suitability of ULEV technology to the European Commission (EC) stage 3 emissions standards. Proposed changes to the European test cycle are discussed and their effect on emissions quantified.

Keywords

Economic Commission for Europe plus extra urban drive cycle electrically heated catalysts engine management system Federal test procedure on-board diagnostics three-way catalyst ultra low emissions vehicle

Get full access to this article

View all access options for this article.

References

Hadded

Stokes

Cartmell

A. J.

Brisley

R. J.

Bruck

The achievement of ULEV emission standards for large high performance vehicles. SAE paper 930389.

Kaiser

F. W.

Maus

Swars

Bruck

Optimization of an electrically heated catalytic converter system calculations and applications. SAE paper 930384.

Socha

L. S.

Jr. Thompson

D. F.

Weber

P. A.

Reduced energy and power consumption for electrically heated extruded metal converters. SAE paper 900383.

Coilings

Hands

Exhaust gas ignition (EGI) a new concept for rapid light-off of automotive exhaust catalyst. SAE paper 920400.

Summers

J. C.

Skowron

J. F.

Miller

M. J.

Use of light-off catalysts to meet the California LEV/ULEV standards. SAE paper 930386.

Heimrich

M. J.

Smith

L. R.

Kitowski

Cold start hydrocarbon collection for advanced exhaust emissions control. SAE paper 920847.

De Boer

C. D.

Stokes

Lake

T. H.

Advanced gasoline combustion systems for fuel economy and emissions. IMechE Seminar Worldwide emission standards and how to meet them, London, 25–26 May 1993 (Mechanical Engineering Publications, London).

Beaumont

A. J.

Noble

A. D.

Scarisbrick

Adaptive transient air–fuel ratio control to minimize gasoline engine emissions. Oral presentation at FISITA 92 Congress, London, 7–11 June 1992, paper C389/042.