Characterization of Automotive Shock Absorbers Using Random Excitation

Abstract

In a previous paper [see reference (4)], it was shown that the restoring force surface (RFS) procedure provides a direct and clear method for characterizing the dynamic properties of automotive shock absorbers or dampers. The procedure was based on repetitive harmonic testing of the absorbers at fixed frequency but with varying amplitude. The current paper describes how the surfaces can be obtained from tests using random excitation. The merits and demerits are discussed relative to the harmonic test procedure. It is shown that the random excitation approach offers a useful alternative but produces force surfaces which are corrupted by small stochastic components; an explanation of the distortion is given in terms of the mathematical model proposed in the previous paper. The implications for identification of shock absorbers are discussed

Keywords

shock absorbers non-linear damper restoring force surfaces random excitation

Get full access to this article

View all access options for this article.

References

Masri

S. F.

Caughey

T. K.

A nonparametric identification technique for nonlinear dynamic problems. J. Appl. Mechanics, 1979, 46, 433–447.

Crawley

E. F.

Aubert

A. C.

Identification of nonlinear structural elements by force-state mapping. AIAA Journal, 1986, 24, 155–162.

Crawley

E. F.

O'Donnell

K. J.

Identification of nonlinear system parameters in joints using the force-state mapping technique. AIAA Paper 86–1013, 1986, 659–667.

Surace

Worden

Tomlinson

G. R.

On the non-linear characteristics of automotive shock absorbers. Proc. Instn Mech. Engrs, Part D, 1992, 206(D1), 3–16.

Audenino

Belingardi

Garibaldi

An application of the restoring force mapping method for the diagnostic of vehicular shock absorbers dynamic behaviour. Preprint, Dipartimento di Meccanica el Politecnico di Torino, 1990.

Belingardi

Campanile

Improvement of the shock absorber dynamic simulation by the restoring force mapping method. Proceedings of 15th International Seminar on Modal analysis and structural dynamics, Leuven, Belgium, 1990.

Surace

Storer

Tomlinson

G. R.

Characterising an automotive shock absorber and the dependence on temperature. Proceedings of the 10th International Modal Analysis Conference, 1991.

Sibson

Manual for the TILE4 Interpolation package, 1985 (Department of Mathematics and Statistics, University of Bath).

Worden

Data processing and experiment design for the restoring force surface method. Part 2: choice of excitation signal. J. Mech. Systems and Signal Processing, 1990, 4, 321–344.

10.

Worden

Data processing and experiment design for the restoring force surface method. Part 1: integration and differentiation of measured time data. J. Mech. Systems and Signal Processing, 1990, 4, 295–319.

11.

Worden

Tomlinson

G. R.

Parametric and nonparametric identification of automotive shock absorbers. Proceedings of the 10th International Modal Analysis Conference, 1991.

12.

Worden

Tomlinson

G. R.

Recent developments in force-state mapping. Proceedings of the 6th International Modal Analysis Conference, 1988.

13.

Lang

H. H.

A study of the characteristics of automotive hydraulic dampers at high stroking frequencies. PhD thesis, Department of Mechanical Engineering, University of Michigan, 1977.

14.

Segel

Lang

H. H.

The mechanics of automotive hydraulic dampers at high stroking frequency. Proceedings of the 7th IAVSD Symposium on the Dynamics of vehicles, Cambridge, 1981.

15.

Genta

Campanile

An approximated approach to the study of motor vehicle suspensions with nonlinear shock absorbers. Meccanica, 1989, 24, 47–57.

16.

Hagedorn

Wallaschek

On equivalent harmonic and stochastic linearisation for nonlinear shock-absorbers. In Non-linear stochastic dynamic engineering systems (Eds Ziegler

Schueller

G. I.

) 1987, pp. 23–32 (Springer-Verlag).

17.

Wallaschek

Dynamics of nonlinear automotive shock absorbers. Int. J. Non-Linear Mechanics, 1990, 25, 299–308.

18.

Wen

Y. K.

Method for random vibration of hysteretic systems. J. Engng Mechanics Div., Proc. Am. Soc. Civil Engrs, 1976, 102.

19.

Yar

Hammond

J. K.

Parameter estimation for hysteretic systems. J. Sound and Vibration, 1987, 117, 161–172.

20.

Cafferty

Giacomin

Worden

A nonlinear model for automotive shock absorbers. IUTAM symposium on the identification of mechanical systems, Wuppertal, Germany, 1993 (to be published).