Flow details through an axisymmetric exhaust valve-port assembly have been investigated numerically. Computations were performed for steady compressible subsonic air flow at different valve lifts. The numerical procedure used for this purpose solves the governing equations using the SIMPLE algorithm. The governing equations are expressed in a general curvilinear coordinate system and are discretized in a finite volume fashion. The time-averaged governing equations are closed using the k–e. turbulence model. The predictions are assessed by comparing with the available experimental flow field data. Good agreement is observed between the predictions and the experiment.
LuckeC. E.The pressure drop through poppet valves. Trans. ASME, 1906, 27, 232–301.
2.
DennisonE. S.KuchlerT. C.SmithD. W.Experiments on the flow of air through engines valves. Trans. ASME (OGP–53–6), 1931, 53(72), 79–97.
3.
HuS. C.Study of exhaust-valve design from gas flow standpoint. J. Aero. Sci., 1944, 13–20.
4.
WoodsW. A.KhanS. R.Discharge from a cylinder through a poppet valve to an exhaust pipe. Proc. Instn Mech. Engrs, 1967, 182, 137–144.
5.
WallaceW. B.High-output medium speed diesel engine air and exhaust system flow losses. Proc. Instn Mech. Engrs, 1968, 182(3D), 134–144.
6.
OldfieldS. G.Mass and energy transfer through a poppet exhaust valve of a turbocharged internal combustion engine. PhD thesis, University of London, 1982.
7.
LaunderB. E.SpaldingD. B.The numerical computation of turbulent flows. Comp. Meth. Appl. Mech. and Engng, 1974, 3, 269–289.
8.
El-TahryS. H.KhalighiB.KuziakW. R.Unsteady flow measurements around an intake valve of a reciprocating engine. SAE paper 870593, 1987.
