The Analysis of Leakage in a Twin Screw Compressor and its Application to Performance Improvement

Abstract

The performance of a helical screw compressor is influenced more by the internal gas leakages than by any other thermo-fluid aspect of its behaviour. Six separate types of leakage path can be identified. Only the cusp blow holes have a constant geometry; every other path has a geometry and resistance to flow which varies (periodically) in a manner unique to it. The pressure difference driving the gas along a leakage path also varies (periodically) and does so in a manner that is not the same for every leakage path. This is quite obviously a complex problem requiring insight in modelling the thermo-fluid behaviour and the solution of a large number of simultaneous equations.

The distribution of leakage through the various leakage paths within the machine is important for the improvement of the compressor performance. A method of determining the aggregate leakage through each path individually over a complete compression cycle is required to enable this study to be conducted. The authors have constructed a mathematical model of the complete compressor thermofluid process which is suitable for this purpose, its macropredictions having been verified against measured data derived from a test compressor. The nature of its micropredictions and their verification, that is for each leakage path, are the subject of the paper proposed here. Analytical techniques are proposed and experimental methods are discussed. The influence of different rotational speeds on the leakage is considered. Also discussed is the manner in which the leakage distribution prediction could be used to optimize a compressor design.

Keywords

twin screw compressor gas leakage thermo-fluid leakage paths thermodynamic model

Get full access to this article

View all access options for this article.

References

Fleming

J. S.

Tang

Young

W. P.

Anderson

H. D.

The calculation and optimization of cutter blade shapes for the manufacture of helical screw compressor rotors. Proceedings of the IMechE European Conference on Developments in industrial compressors and their systems, 1994, pp. 17–26 (Mechanical Engineering Publications, London).

Fleming

J. S.

Tang

Anderson

Optimisation techniques applied to the design of a refrigeration twin screw compressor. Proceedings of International Compressor Engineering Conference, Purdue University, Purdue, Indiana, 1994, pp. 641–646.

Tang

Fleming

J. S.

Computer aided geometrical analysis of the geometrical characteristics of a helical screw compressor. Proceedings of International Compressor Technique Conference, Xi'an Jiaotong University, Xi'an, China, 1993, pp. 400–408.

Singh

P. J.

Patel

A generalized performance computer program for oil flooded twin-screw compressors. Proceedings of International Compressor Engineering Conference, Purdue University, Purdue, Indiana, 1984, pp. 544–553.

Tang

Fleming

J. S.

Clearance between the rotors of helical screw compressors: their determination, optimization and thermodynamic consequences. Proc. Instn Mech. Engrs, Part E, 1994, 208(E2), 155–163.

Fujiwara

Kasuya

Matsunaga

Watanabe

Computer modeling for performance analysis of rotary screw compressor. Proceedings of International Compressor Engineering Conference, Purdue University, Purdue, Indiana, 1984, pp. 536–543.

Jonsson

Performance simulations of twin-screw compressors for refrigeration purpose. VDI Bericht 640, 1987, pp. 187–207.

Stoŝić

Kovaĉević

Hanjalić

Milutinović

Lj.

Mathematical modeling of the oil influence upon the working cycle of screw compressors. Proceedings of International Compressor Engineering Conference, Purdue University, Purdue, Indiana, 1988, pp. 354–361.

Jonsson

Performance simulations of twin-screw compressors with economizer. Proceedings of International Compressor Engineering Conference, Purdue University, Purdue, Indiana, 1990, pp. 884–897.

10.

Stoŝić

Milutinović

Lj.

Hanjalić

Kovaĉević

Investigation of the influence of oil injection upon the screw compressor working process. Int. J. Refrig., 1992, 15(4), 206–220.

11.

Tang

Fleming

J. S.

Simulation of the working process of an oil flooded helical screw compressor with liquid refrigerant injection. Proceedings of International Compressor Engineering Conference, Purdue University, Purdue, Indiana, 1992, pp. 213–220.

12.

Tang

Fleming

J. S.

Obtaining the optimum geometrical parameters of a refrigeration helical screw compressor. Proceedings of International Compressor Engineering Conference, Purdue University, Purdue, Indiana, 1992, pp. 221–227.