Twenty-eight standard Charnley sockets were retrieved at revision surgery. The penetration angle with respect to the cup coordinate system, β, and penetration depth, d, of the sockets were measured using both the traditional shadowgraph technique and by analysing data obtained from a coordinate measuring machine (CMM). In addition, d was deduced radiographically from pre-revision X-rays. Limits of agreement between the three methods of measuring d were of the order of ±0.5 mm. Using the data obtained from the CMM it was possible to deduce the wear volume Vmeas directly. It was found that, in general, values of the wear volume calculated from d and β using equations cited elsewhere (1, 2) were both imprecise and inaccurate. The direct measurement of the wear volume using the CMM depends on the location of reference points external to the wear surface. If such surfaces were damaged, then it was concluded that the shadowgraph technique provided the most suitable method for measuring the dimensional changes in the retrieved socket, due to its relative ease of use.
AtkinsonJ. R.DowsonD.IsaacG. H.WroblewskiB. M.Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints. Wear, 1985, 104, 225–244.
2.
KaboJ. M.GebhardS.LorenG.AmstutzH. C.In vivo wear of polyethythene acetabular components. J. Bone Jt Surg., 1993, 75B, 254–258.
3.
PossR.BrickG. W.WrightR. J.RobertsD. W.SledgeC. B.The effects of modern cementing techniques on the longevity of total hip replacement. Orthop. Clinics of North America, 1988, 19, 591–598.
4.
WroblewskiB. M.SineyP. D.Charnley low-friction arthroplasty in the young patient. Clin. Orthop., 1992, 285, 45–47.
5.
MorscherE. W.Current status of acetabular fixation in primary total hip replacement. Clin. Orthop., 1992, 274, 172–193.
6.
MulroyR. D.HarrisW. H.The effect of improved cementing techniques on component loosening in total hip replacement. A 11 year radiographic review. J. Bone Jt Surg., 1990, 72B, 757–760.
7.
SchmalzriedT. P.KwongL. M.JastyM.The mechanism of loosening of cemented acetabular components in total hip arthroplasty. Clin. Orthop., 1992, 274, 60–78.
8.
WroblewskiB. M.Cementless versus cemented total hip arthroplasty, Orthop. Clinics of North America, 1993, 24, 591–597.
9.
ManleyM. T.SerekianP.Wear debris, an environmental issue in total joint replacement. Clin. Orthop., 1994, 298, 137–146.
10.
ShanbhagS.JacobsJ. J.BlackJ.GalanteJ. O.GlantT. T.Macrophage/particle interactions: effect of size, composition and surface area. J. Biom Mater. Res., 1994, 28, 81–90.
11.
AmstutzH. C.CampbellP.KossovskyN.ClarkeI. C.Mechanism and clinical significance of wear debris induced osteolysis. Clin. Orthop., 1992, 276, 7–18.
12.
WroblewskiB. M.Revision surgery in total hip arthroplasty, 1990 (Springer-Verlag, London).
13.
WroblewskiB. M.Direction and rate of socket wear in Charnley low-friction arthroplasty. J. Bone Jt Surg., 1985, 67B, 757–761.
14.
HallR. M.UnsworthA.WroblewskiB. M.HardakerC.Long term changes in the frictional behaviour and wear in explanted Charnley hip prostheses. J. Bone Jt Surg., 1993, 75B(supplement), 267.
15.
CharnleyJ.The long term results of low-friction arthroplasty of the hip performed as a primary intervention. J. Bone Jt Surg., 1972, 54B, 61–76.
16.
IsaacG. H.WroblewskiB. M.AtkinsonJ. R.DowsonD.A tribological study of retrieved hip prostheses. Clin. Orthop., 1992, 276, 115–125.
17.
DowsonD.JobbinsB.Seyed-HarrafA.An evaluation of the penetration of ceramic femoral heads into polyethylene acetabular cups. Wear, 1993, 162–4, 880–889.
18.
DerbyshireB.FisherJ.DowsonD.HardakerC.BrummittK.Comparative study of the wear of UHMWPE with zirconia ceramic and stainless steel femoral heads in artificial hip joints. M Engng Physics, 1994, 16, 229–236.
19.
DerbyshireB.HardakerC. S.FisherJ.DowsonD.BrummittK.Assessment of change in volume of acetabular cups using a coordinate measuring machine. Proc. Instn Mech. Engrs, Part H, 1994, 208(H3), 151–158.
20.
OhlinA.SelvikG.Socket wear assessment. J. Arthroplasty, 1993, 8, 427–431.
21.
BlandJ. M.AltmanD. G.Statistical methods for assessing agreement between two methods of clinical measurement. Lancet, 1986, i, 307–310.
22.
LivermoreJ.IlstrupD.MorreyB.Effect of femoral head size on wear of the polythene acetabular component. J. Bone Jt Surg., 1990, 72A, 518–528.
23.
BankstonA. B.FarisP. M.KeatingM.RitterM. A.Polyethylene wear in total hip arthroplasty in patient-matched groups. J. Arthroplasty, 1993, 8, 315–322.
24.
CharnleyJ.HalleyD.Rate of wear in total hip replacement. Clin. Orthop., 1975, 112, 170–179.
25.
ClarkeI. C.BlackK.RennieC.AmstutzH. C.Can wear in total hip arthroplasties be assessed from radiographs?Clin. Orthop., 1976, 121, 126–142.
26.
McKellopH. A.Wear of artificial joint materials. II: Twelve channel wear-screening device: correlation of experimental and clinical results. Engng in Medicine, 1981, 10, 123–136.
27.
WrightK. W. J.DobbsH. S.ScalesJ. T.Wear studies on prosthetic materials using pin-on-disc machine. Biomaterials, 1982, 3, 41–48.
28.
SaikkoV.Wear and friction properties of prosthetic joint materials evaluated on a reciprocating pin-on-flat apparatus. Wear, 1993, 166, 169–178.
29.
McKellopH. A.ClarkeI. C.Degradation and wear of UHMWPE. In Corrosion and degradation of implant materials (Eds SyrettB. C.AcharyaA.) 1985, pp. 351–368 (ASTM Special Technical Publishers, Philadelphia).
30.
SaikkoV.PaavolainenP.SlätisP.Wear of the polyethylene acetabular cup. Acta Orthop. Scand., 1993, 64, 391–402.
31.
CharnleyJ.Low friction arthroplasty of the hip, theory and practice, 1979 (Springer-Verlag, New York).
32.
CharnleyJ.KamangarA.LongfieldM. D.The optimum size of prosthetic heads in relation to the wear of plastic sockets in total replacement of the hip. M Biol. Engng, 1969, 7, 31–39.
