The Kinetics of Gas-Phase Lubrication in the Orthogonal Machining of an Aluminium Alloy

Abstract

Tetrachloromethane (carbon tetrachloride) has been used as a model gas-phase lubricant to investigate the kinetics of lubrication in the low-speed orthogonal machining of a precipitation-hardened aluminium alloy, in a controlled low-pressure environment. The dependence of cutting force on lubricant gas pressure, feed (that is depth of cut in these experiments), cutting speed and interfacial temperature was investigated. The results are not consistent with previous theories of vapour-phase lubrication in which transport of the lubricant molecules is assumed to control the reaction rate. A new model is proposed involving activated chemisorption of the lubricant at the tool-chip interface. The predictions of this model are in good agreement with the experimental observations and an activation energy of 18.4 kJ/mol has been derived for the relevant reaction.

Keywords

gas-phase lubricant chemisorption tetrachloromethane machining kinetics of lubrication metal cutting

Get full access to this article

View all access options for this article.

References

Bowden

F. P.

Tabor

The friction and lubrication of solids, Part II, 1964 (Oxford University Press).

Williams

J. A.

Tabor

The role of lubricants in machining. Wear, 1977, 43, 275–292.

Barlow

P. L.

Influence of free surface environment on the shear zone in metal cutting. Proc. Instn Mech. Engrs, Part 1, 1966–7, 181, 687–701.

Boothroyd

Fundamentals of metal machining and machine tools, 1975, McGraw-Hill, Kogakusha, Tokyo).

Schey

J. A.

Tribology in metalworking, 1983, American Society for Metals, Ohio).

Merchant

M. E.

Cutting-fluid action and the wear of cutting tools. Proceedings of Conference on Lubrication and wear, 1957, pp. 566–574 (Institution of Mechanical Engineers, London).

Williams

J. A.

The action of lubricants in metal cutting. J. Mech. Engng Sci., 1977, 19, 202–212.

Shaw

M. C.

Metal cutting principles, 1984, Clarendon Press, Oxford).

Furuichi

Influence of atmosphere on the phenomena of cutting. Trans. Jap. Soc. Mech. Engrs, Part 3, 1966, 32, 329–340.

10.

Uehara

Cutting phenomena in vacuum and in various atmospheres. Proceedings of First International Metal Cutting Conference, Guangzhou, China, 1983, pp. 95–111 (China Academic Publishing).

11.

Mori

The relationship between adsorption activity and boundary lubrication. J. Jap. Soc. Lubric. Engrs, 1988, 33, 585–590.

12.

Smith

Naerheim

Lan

M. S.

Theoretical analysis of cutting fluid interaction in machining. Tribol. Int., 1988, 21, 239–247.

13.

Cassin

Boothroyd

Lubricating action of cutting fluids. J. Mech. Engng Sci., 1965, 7, 67–79.

14.

Wakabayashi

Williams

J. A.

Hutchings

I. M.

The action of gaseous lubricants in metal cutting. In Tribology in metal cutting and grinding, 1992, pp. 33–40 (Mechanical Engineering Publications, London).

15.

Walton

A. J.

Three phases of matter, 1983, Oxford University Press).

16.

Wakabayashi

Studies in the lubricating action and performance of metalcutting fluids. PhD dissertation, Keio University, Japan, 1994.

17.

Boothroyd

Temperatures in orthogonal metal cutting. Proc. Instn Mech. Engrs, 1963, 177, 789–802.

18.

Hayward

D. O.

Trapnell

B. M. W.

Chemisorption, 1964, Butterworths, London).